Likes
Comments
Share
Let me guys know what you think! Feedback is always appreciated! 😎😎🙌 [DE] Tage sind an den Bildern angegeben - Pflanzen entwickeln sich sehr gut - ich entferne immer wieder Blätter - pH fällt, werde bald NL tauschen [EN] Days are on pictures - Plants are developing very well - I keep removing some leaves - pH is dropping, might need to change the res
Likes
21
Share
91 Grapes day 80; Well for a plant that is supposed to grow a 65 day from sprout she still has some time left to finish. Buds are stacking in true chem91 fashion super dense and chunky but the smell is nothing short of downright grapes, it’s the same smell of grape koolaid when you tear into a package, or a grape pixie stick. Trichomes are getting thick and buds are covered in the grape residue not complaining mind you. She is showing signs of some sort of illness, or nutrient imbalance but she is in mid to late stage of flower development so just going to water her and see what happens, let her grow. Vanilla Fizz. Ms. Fizz her flowers are on the airy side of things but they do continue to fatten daily so time will tell if they will harden up. Trichomes are in abundance and cover everything. And smell,my goodness she stinks, it’s a sweet smell very perfumie kind of thing going on. Her branches are starting to sag and will need some support before next week’s update. Harvey Wallbanger. Miss Harvey. I can’t express enough how upset I am about the rodent encounter that almost caused her demise. I suppose I should be grateful that she is still here with us and she can grace us with her beauty.
Likes
16
Share
Flowering day 12 since time change to 12/12 h. Hey everyone ☺️. Once again a wonderful week goes by 😀. It has developed so far and is now slowly starting to develop its flowers :-). As soon as the first forms of buds can be seen (I think in 5-10 days) 2 g GHSC Powder Feeding Bio Bloom per liter of substrate are added. In the third week, 1 g per liter of substrate is added so that it lasts through to the end :-). This week it was poured 3 times with 1 liter each 👍. The entire tent was also cleaned and the electronics checked for functionality. The humidifier was refilled every day and fresh osmosis water was drained into the tank for the coming week ☺️. The plants have all been checked for health and pests 👍. Next week the bamboo sticks are inserted towards the end for support and the lowest shoots are removed so that at the end the energy is not wasted in the lower area 👍. Otherwise there is nothing more to report this week :-). I wish you a lot of fun with the update 😎. Stay healthy and let it grow 🍀. You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8
Likes
30
Share
Hello Diary. It completed the last week of flowering, a total of three weeks of vegetation and seven weeks of flowering. A total of 81 days since it sprouted. In the end, I can say that Watermelon lasted well, although I had problems, I mean over-feeding at one point, the flowers look good, they are beautiful purple color, full of trichomes and intense scent. The photos show that most of the leaves have totally turned yellow and a lot of them have brown spots on them, but the flowers have been spared. Although not as hard and full as the flowers of his roommate, Purple Punch. There were only two waterings this week, I wanted him to consume all the water to make the drying faster. The condition in the growbox is satisfactory, the temperature is around 25 degrees while the humidity is below 40%. Here’s what the last week looked like. 31/04/2021 - Day 64. Watering. I regulated p.H. at 6.3 and with 7 liters of water I evenly watered all three plants on the “farm”. Temp / Humidity on the farm - 25 degrees and 37% humidity. 03/04/2021 - Day 67. Watering. The procedure is the same as three days ago. Temp / Humidity on the farm - 25.3 degrees and 38% humidity. 07/04/2021 - Day 71. Harvest. After I did the photography, I cut the plant at the bottom of the stalk and hung it upside down in a growbox to dry. The temperature in the Box is about 25 degrees and the humidity is slightly lower than 40%. I turned off the lights and left only the ventilation on while I also turned off the fans. Now it is preceded by about two weeks of drying, maybe a little less, so I call with one last review. See you soon.
Likes
18
Share
@Hawkbo
Follow
These 2 are doing okay they are very bushy so a little tough to work with. I havnt defoliated one of them at all I'm just waiting til the strip day so I hope its not too uneven. Growth has been steady and everything is thriving right now. Might need to get a new dehumidifier soon mine is starting to shit the bed so RH levels are a little high with lights out but the heater keeps them low enough to get by at this point. Hope everyone is practicing their social distancing skills. Use the code bangdang at any of my sponsors for 10% off. @greenbuzzliquids  @growlightscience.led  @rainscience_growbags  @gorilla_grow_tent
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Processing
Likes
2
Share
Lots of bud development, starting to stack up a bit. Thinking I will see a lot more bud growth in the coming weeks. The older PT is finishing up this week and starts our harvest for the next few weeks. I’ll be checking seeds on the buds I pollinated and trichomes on the others. There are a few random seeds isn’t he tent but so far it appears that the majority of the bud is seedless. I think I was able to minimize the pollen like I wanted to. Male plant was chopped at the beginning of this week after only a few pods opened. I only needed a few to get enough seeds to grow again in the future.
Likes
3
Share
Lil youngin on their way home should be home for 4/20 along with 2 of their mother...as for the breeding project pollination is a success also been harvesting pollen(feminized) for later use Mothers are growing well jus to continue cut and set aiming for about 1000 already cut 3 and got 100...happy growing
Likes
3
Share
@elsolo1
Follow
- Third week Came back from my trip and she really shot up PH was down (around 5.5) so she absorbed a good amount of nutrients while I was away Changed reservoir with a dosage of Base A- Base B- Vege- Silica- using 1.0 ML per Liter Roots are nice but I'm starting to think she might have some sort of rot going on, going to introduce Peroxide in the water to help her out No sexing yet, I'm assuming she's a female (hopefully) Did some small LST in order for the bottom line to grow a little bit
Likes
5
Share
@Lazuli
Follow
The weight is coming now. The smell is very sweet
Likes
19
Share
@Kirsten
Follow
The seedling is doing really well. We are progressing at a normal pace. There isn't much else to report this week. These weeks are always slow and pretty boring. I'm just keeping the medium sufficiently watered. Thank you for checking in this week and hanging out in the comments 😁💚✌️🌱🤞🧡
Processing
Likes
3
Share
@Canadian
Follow
Day 85 from seed and unfortunately for the plant looks like the lack of light really handicapped how much bud she could really develop I will try to raise her up today or tomorrow in order to attempt more light to penetrate to her but the damage is done already even though the smell and the looks of them are amazing I'm not going to get big flowers like I was hoping for nevertheless she smells and looks very very nice. Thank you for reading I will continue to update have a happy grow
Likes
109
Share
Hello everyone :-) A lot has happened this week 🤗. It has developed very nicely and its roots have exploded properly 😍. It is also slowly becoming lighter, since it has obviously been slowly consuming its nutrients from the soil :-) That is why it was repotted today, mixing 2 g per liter. soil Green House Powder Feeding Bio Grow between the soil. Then everything was mixed and distributed well, and the plant used. I hope that's the little shortcoming is quickly picked up :-) When watering, 1.5 g of enhancer per liter was added :-) Unfortunately I noticed too late that I didn't take any pictures of the root ball while repotting 🤦‍♂️🏻. I look forward to seeing how it evolves this week. Above all, I am excited to see how she is doing with the Green House Powder Feeding BioGrow , as I have been used to mixing everything for each wash separately 😊. During the course of this week I will also spontaneously decide whether I will give her an LST, topping fimming, etc., since I have to see how I am in the vegi phase, because the Cup has a limited time 😁. I wish you all a lot of fun watching, have a nice week, stay healthy 🙏🏻 and let it grow ☘️👍 . Green House Seeds Company Cup 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
38
Share
@Sadhus
Follow
**Semaine 8 : Huitième Semaine de Floraison – Phase Ripening (8-14 avril 2026)** **Note :** Mise à jour hebdomadaire. On entre officiellement dans la phase **ripening** (mûrissement). Les données TrolMaster et GrowOps confirment une transition très propre et contrôlée. Tout se passe bien, sans aucun souci. ### Contexte et Objectifs de la Semaine Semaine 8 sur 12 totales : on passe du bulking pur au **ripening**. L’objectif n’est plus de faire grossir les buds, mais de les densifier, de maximiser la production de trichomes et de laisser la plante terminer sa maturation. Steering : passage progressif vers **génératif** (irrigations moins fréquentes, dryback plus marqué la nuit, baisse progressive de tous les paramètres). Changements appliqués cette semaine : - PPFD diminué progressivement (750 → 550) - Température et humidité baissées - EC réduit (2.6 → 1.5) - UV maintenu à 90 min/jour pour continuer à booster terpènes et résine **Petit tips éducatif : Pourquoi baisser progressivement en ripening ?** En phase ripening (dernières 4-5 semaines), la plante arrête de pousser en taille et concentre son énergie sur la maturation des fleurs. - Baisser le PPFD/DLI évite le stress lumineux et permet aux trichomes de grossir sans brûler. - Baisser la température (surtout la nuit) et l’humidité favorise la synthèse des terpènes et réduit le risque de moisissure. - Réduire l’EC évite l’accumulation de sels en fin de cycle et améliore le goût final. - Passer en steering génératif (dryback plus long) force la plante à « finir » ses buds et à concentrer résine et cannabinoïdes. Fait correctement, cela donne des buds plus compacts, plus frosty et avec un profil terpénique plus prononcé. ### Observations des Plantes La plante dominante reste à **150 cm** avec une structure massive et une canopée bien remplie. Les buds sont **follement frosty** : couverts d’une épaisse couche de trichomes (sugar leaves très blanches), ce qui donne un aspect brillant et collant incroyable. La densité des buds est bonne et devient bien compacte, même si la taille reste raisonnable (j’ai déjà vu des buds plus gros sur d’autres variétés, mais ici la qualité prime). Odeur : très forte et agréable, mélange sucré/épicé/floral typique de Sticky Broccoli. Pistils majoritairement colorés et enroulés. Santé générale : parfaite, vert profond sur les feuilles restantes, zéro pest, zéro carence, zéro stress visible. Les plantes sont en pleine forme et concentrées sur la maturation. ### Paramètres Environnementaux (TrolMaster + GrowOps – synthèse semaine 8) - **Température jour** : 19-21 °C (cible 20 °C, live 20.3 °C) - **Température nuit** : 14-15 °C (baisse nette pour ripening) - **Humidité jour** : 48-58 % (cible 55 %, live 51.5 %) - **Humidité nuit** : 29-39 % - **VPD** : 0.9-1.3 kPa (live 1.16 kPa → bien adapté au ripening) - **PPFD** : 550 (baisse progressive, DLI ~24) - **UV Light** : 90 min/jour (maintenu) - **Far Red Light** : 30 min en fin de cycle - **CO₂** : setpoint 900 ppm jour - **EC solution** : 1.5 mS/cm (live ~1.62) - **pH solution** : 5.8-6.0 (live 6.27) - **Runoff EC** : 2.5-3 mS/cm - **Irrigation** : moins fréquente (transition générative) - **Runoff % daily** : 20-30 % - **Night dryback** : 20-30 % (augmenté pour ripening) - **Steering** : génératif (confirmé cette semaine) ### Nutrition et Irrigation (Soupe actuelle) La recette reste la même que les semaines précédentes, mais avec EC réduit à 1.5 : - Cocos A + B - CANNA PK 13/14 (dose légère) - Green Sensation suprimer - Pure Zym suprimer - Sugar Royal suprimer - Cal-Mag Amino 1 ml - Silica Force 1 ml - pH- pour ajuster Eau à ~20 °C. L’irrigation est maintenant moins fréquente pour accentuer le dryback nocturne et favoriser la concentration des buds. ### Problèmes et Ajustements **RAS total.** Aucune alerte, aucune carence, aucun excès. La baisse progressive de tous les paramètres se fait en douceur et les plantes répondent très bien. Le passage en ripening est maîtrisé. ### Plans pour la Semaine 9 - Continuer à baisser tranquillement : PPFD, température (surtout nuit), humidité et EC - Maintenir UV à 90 min/jour - Défoliation très légère si nécessaire (seulement les feuilles qui bloquent la lumière sur les buds inférieurs) - Photos rapprochées pour suivre la couleur des trichomes (passage vers ambré) - Préparer le flush (généralement à partir de la semaine 9-10 selon maturité) Ce journal sera mis à jour hebdomadairement. #GrowLegendary #Zamnesia #Plagron #EternityGrowCup2 Les buds sont magnifiquement frosty, denses et résineux, avec une odeur qui devient vraiment puissante. La qualité est au rendez-vous, même si la taille reste raisonnable. On continue la descente en douceur vers la récolte ! 🌱✨
Likes
1
Share
Yo la fam attention les yeux 🔥🔥🔥🌱🔥
Likes
10
Share
@coriander
Follow
Pretty simple first week! Seed took 3 nights for the taproot to pop and it was planted in its final pot on day 4. On day 6, it finally popped through the soil and on day 7 the little sprout is starting to grow up. There is a small piece of seed casing left attached. Going to leave it for a day or two. If it doesn't fall off, I'll do it myself. Thanks for stopping by! 🥦
Likes
3
Share
The seeds germinated after 1-3 days, 1x runtz unfortunately did not germinate. 3 Days after the germination the plants were growing too quickly so I repot them them in deeper and increased the light intensity to 50% = 100 watts. When repotting in biobizz light mix, the plants were also given a load of Mykorrizah from Great white premium.
Likes
1
Share
@LAShugars
Follow
Growing great! Trying to stop the stretching. Really thick stem at the base for this little 3 gallon grow bag.