Beginning of third week, changed up my set up! Ready to see how these girls react to the Nutes also I have two slow growing plants(purple lemonade autoflower) & (seedsman autoflower lemon)

Beginning of third week, changed up my set up! Ready to see how these girls react to the Nutes also I have two slow growing plants(purple lemonade autoflower) & (seedsman autoflower lemon)

Beginning of third week, changed up my set up! Ready to see how these girls react to the Nutes also I have two slow growing plants(purple lemonade autoflower) & (seedsman autoflower lemon)

Fantastica settimana! Finalmente iniziano a formarsi i fiori e i primi peli! Per la prima volta ho aggiunto una seconda rete per aiutare lo scrog, sono molto soddisfatto, ho solamente dovuto lasciare un buco nella rete per far passare il vaporizzatore per tenere bassa la temperatura del box e di conseguenza dell'acqua nai vasi. Ho risolto il problema della muffa sulle radici grazie al trichoderma e alle micorizze, stanno tornando come nuove dopo un mesetto non proprio positivo sotto questo punto di vista, anzi, se peggiora a rischiavo di non arrivare alla fine del raccolto. Corso sono stato un pelino alto con l'ec, arrivando quasi a 2.8,l'ho abbassata rabboccando. Manca un mese, siamo nel momento clou 😍😍🤩🤩😝😝🍀🍀🍀🔝🔝🔝💪🏼💪🏼💪🏼

This week went well..no complaints on my end..as you can see the ladies are starting to produce bud..the stretch is pretty much over..for some reason Bruce banner # 1 didn't stretch as much. These past few days involved hours and hours inside the tent defoliating the girls..I didn't know how much more defoliating would be involved when Scrogging..but I know it'll be worth it at the end..just trying to have control over all the variables I can control for a successful harvest. Did a slight increase with liquid kool bloom from 10 ml to 15 ml per 5 gallons. Will keep an eye on how they respond..will keep yall updated in my next upload. Happy Growing 😎

This week went well..no complaints on my end..as you can see the ladies are starting to produce bud..the stretch is pretty much over..for some reason Gorilla glue # 2 didn't stretch as much. These past few days involved hours and hours inside the tent defoliating the girls..I didn't know how much more defoliating would be involved when Scrogging..but I know it'll be worth it at the end..just trying to have control over all the variables I can control for a successful harvest. Did a slight increase with liquid kool bloom from 10 ml to 15 ml per 5 gallons. Will keep an eye on how they respond..will keep yall updated in my next upload. Happy Growing 😎

06/26: très content les fleurs sont givrées à souhait j'ai l'impression qu'un petit coup de pouce minérale ne fait pas de mal à nos chères plantes. #41 06/27: la floraison s'accélère à vue d'oeil :D #42 06/28: arrosage *engraisser 06/29: très content de l'effet des 0.5ml/L de BigBud ajouter à la dernière mixture, prochain arrosage à l'eau ph'd plus additif non NPK. 06/30: une journée de plus au paradis. J'ai augmenter le nombre de lux à 90000 par endroit je verrais demain matin le résultat s'il y en a un.... ms bon max c'est 85000lux j'ai lu ms bon les led dégage moins de chaleur on peut un peu overkill niveau lux le soleil se gêne pas! 07/02: ayant démarrer la culture d'une Orange Sherbet aussi de chez fb42 (je suis conquis par fastbuds42) j'ai donc laissé ce journal pendant deux jours.. Arrosage 3.5L *engraisser (GHE essentiel, BigBud, BudCandy) Prochaine arrosage avec engrais organique en micro dosage.

Was considering a 20/4 cycle on flowering but after snapping the stem I've brought that in now to try and aid recovery in any way I can. Spotted pistils after a trim to the Strawberry Banana on day 22, thing about to get interesting! Last bits of LST and such for her this week but the Gorilla Cookies still has a bit to go and probably even more after the stem incident 🤦‍♂️Speaking of which, little RAM fan gave up this week so I got a bigger one to cool things better but in the process of setting it up I took out a lower branch on the Strawberry Banana, not to bad as it was only a spindly little thing and the space has been utilised to bend some others over giving even more light access. Going to start adding a small amount of bloom to the feed for her now but the Cookies are still on a 10th of the recommended dose but doing well for it spreading out nicely! By the end of the week pistils were really coming out on both girls so a big trim was given and a probable last round of LST to really let the light in! All looks good right now!

Almost to flower lighting. Doing a high frequency fertigation. Due to the properties of the growing medium. Made up of pretreated coco coir at about 70%, the rest is perlite. It seems to be difficult to overwater. I found the coco for cannabis website and have been following their recommendations for feeding twice a day. Trying to keep the run off water at 20-30% of what I add to the top of the pot. EC readings comparisons to input values have made watering twice a day with less total water each time. Is the only way to keep my ec measurements within 400 or .400 depending on the meter. Of the input. So I don't want the run off to read higher than 400 micro semens ec reading than the original solution fed to the plant. Going to stick with it. Purple stems are on all the plants. So magnesium is not being absorbed as well or I don't know. Not enough in the nutrients. I'm skeptical to use magnesium sulfate. Very alkaline.

So proper calculation!! It’s exactly 5 weeks today since germination! Been getting cold temperatures during lights out period!! So just introduced a oil heater.. when lights are out now I’m keeping a desk fan running all the time with the carbon filter fan also! Oil heater comes on when lights go out but is only reaching a temperature of 21 degrees which is better than 14-15 that I had been getting without the heater! Still unsure weather I should be putting into flowering stage yet but that’s what I’ve decided to do! Getting bigger leafs still and unsure if to trim? One of my stems did snap as maybe a little to hard on the lst! It’s made the perfect clone tho! So done some research into clonex??? Another topic that’s tricking my brain!! Introduced more light into my grow tent also which is a fan operating 600w led grow light! Not sure if the light I already have and a led one will make a difference as there not the same?? But still they look healthy??

We're rolling into week 22, the 9th week of flower for these wonderful girls. Possibly the last week they'll have, at least the last week UKBS 1 may have. They've both shown great progress in terms of growth in the past week in my opinion, and the trichomes are beginning to present as cloudy with a smattering of amber. I like my CBN, so I prefer to let them amber slightly more than most. Rest assured I'll be keeping a close eye on trichome color in this next week or two. Timelapse is out for the week. Updates come as the week progresses, as usual. EOS T5 shots are out. -7/4/2021 - A cola on Carl 1 was too heavy for it's own good, and snapped. I decided to remove and dry it as I really don't see a point in trying to re-attach it at this point in flower. -7/6/2021 - Another cola snapped on Carl 1. Unfortunate, I was hoping she'd fatten up further first. Ah well.

Another solid week! I've been watering every other day and feeding once per week. I added Cal-Mag this week as I noticed some deficiencies on some fan leaves (little brown spots in middle of the leaf). I defoliated Alana really heavy today! She needed to be opened up for sure! I hope she responds well!! I also defoliated Anna a little as well. Anna grew 6 inches this week and is 26 inches tall!! Alana grew 5 inches and is 21 inches tall!! Otherwise, things are going well... they stink something fierce!! WOW!! I turned the T6 up a level.... Currently running at 6 out of 10! Cheers!!

Another solid week! I've been watering every other day and feeding once per week. I added Cal-Mag this week as I noticed some deficiencies on some fan leaves (little brown spots in middle of the leaf). I defoliated Alana really heavy today! She needed to be opened up for sure! I hope she responds well!! I also defoliated Anna a little as well. Anna grew 6 inches this week and is 26 inches tall!! Alana grew 5 inches and is 21 inches tall!! Otherwise, things are going well... they stink something fierce!! WOW!! I turned the T6 up a level.... Currently running at 6 out of 10! Cheers!!

https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND THEY WILL REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I've owned a gorilla grow tent before and MARS HYDRO TENTS are better. Don't waste the money on a gorilla tent, get a mars and save a couple hundred bucks for your fertilizers and soils👍🤜🤛I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

6/29 the past 3 days were 112, 115, and then 118 degree days. The plants held up fine but this one had some heat damaged leaves because of it. Also top dressed with a cup of one shot 7/3 watered with slf-100 and recharge