ve repotted into her final 15l auto pot. The procedure I used is as follows. Items needed.. Clay pebbles Hydro coco 60/40 clay pebbles/Coco. Silicium Flash Startrex Mycrotrex Bactrex And of course Bio tablets X2. 15l of hydro coco was mixed with 25g of Silicium Flash and 25g of Startrex. Mixed up well to form the main substrate. I filled the autopots to a depth of 5cm with clay pebbles and then layered up the amended substrate making a nice hole for my 300ml nursery pots. Into this hole I sprinkled in 5g of Mycrotrex and then dropped the seedling in. This then gets 2 biotabs pushed 5-8cm into the substrate and 1l of water mixed with 5ml of Bactrex I need to top feed the autopots for a couple of weeks so the root system can establish before I transfer to my flower room and the gravity feeding trays..🤘🏼👍🏼 I'm keeping temps at a constant 25c and lights are on 24hrs a day. Rh is sitting around 65%.it too low hence the domes but then it goes too high. I'm going to run a couple of days with the 65% but vpd over 1 is a bit high for so early.. we shall see. I'm more than happy with the purple punch. Considering when she was a sprout she grew out of her Coco plug and I found her flat on the floor...She is doing great. I'm a little concerned she is getting too much light. The others are all happy but punchy looks like she is a bit stumpy compared to the others. I've moved her to a side position in the tent so she gets a little less direct photons..

Ehy ragazzi tutto bene? Spero di sì.. Nn mi ripeterò in questo terzo diario nelle qualità stupefacenti della grow box della Mars hydro, posso solo constatare che funziona tutto alla perfezione, il controller Dell aria in entrata è Dell umidità funziona che è una bellezza! Ora è molto più pratico da utilizzare e puoi impostare tutto e quasi dimenticartene! Vabbè ora sto esagerando, perché cnq non essendo l'ultimo modello Smart che si poteva collegare WiFi, quello si sarebbe stato un verrò doppio passo in avanti per gestire al meglio le mie ragazze da una sola app sullo smartphone! Spero in futuro magari un altro upgrade del controller ssmart sarebbe davvero una cosa che apprezzerei tantissimo dalla collaborazione con questa grande azienda Mars hydro! Vi lascio qua sotto i link della tenda e del fan https://marshydro.eu/products/mars-hydro-100x100x180cm-grow-tent/ https://marshydro.eu/products/4-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller/

Day 15 Both plants didn't show any stress after transplant. Started with a light feed to introduce nutrient schedule.. Day 21 they look super healthy.

well, she spent a week in the growing pot :) it seems the girl was not stressed :) hi, she looks healthy, a bit more leafy, but that's normal, after all, she came from the balcony :D every day I remove a few leaves, because there are a lot of them, she still has a week left and will be cut off: (I would like to give her a little more time, but I'm going on vacation and I don't have anyone to leave such work :) so I'd better cut it earlier :).

Started smell,but I think is so small what do you think ? Maybe I do something wrong? It's my first lst in my life let me now what I can do better;)

3/12: looks like a few weeks left. Buds are dense AF. Leaves are still looking sad. Opted to give light nutrients today. Not going to lie, as much as I love growing, I'm ready for a break!

Semana 1 abril - 7 abril 3 abril - feeding day 1.1 L 6 abril feeding day (1.2L) Calmag 0.5; bio bloom 2.5ml; topmax 1.5ml; bio heaven 2.5ml; acti-vera 2ml; biogrow 1ml pH 6.5

Endspurt 🤗 Es wird sich hier nur noch um Tage handeln🙌 dann heißt es endlich... Erntezeit😅 Es duftet herrlich und die Knospen sind ordentlich geschwollen und können noch ein kleines bisschen😉😁 Fortsetzung folgt...✌️😊💚

I defoliated the Plant for the first time and adjusted the LST to the growth of the plant. I found the first white pistils shooting out from the plant which shows me she is ready to go into flower. Until now i am very happy with the progress, still no issues :)

Transplanted the cbd cnc. Doing well SD pruned again awaiting another week to see if it recovers

🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmsltd - https://www.instagram.com/stacksfarmsltd 🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

We will see, we hope... littlest two different ladies in same strain.

Finally coming along poor girls!!

Probabilmente il topping del ramo apicale non è stata la migliore cosa per me, mi servirà di lezione per la prossima estate.

Welcome growers We are in the last day of week n°4 in bloom for this little but gorgeous CREAM CARAMEL 🍬🍭🍫 Very impressive strain Super fast in developing buds with already some nice sweet notes Also the trichomes are come in a good amount and still increase The defoliation last week dosen't stop her job 💪 I think she can be like i want in maximum in another month, so eight week of flowering in total. But we will see.. Anyway.. In this last week i have only put some sticks in the ground, where I will go to tie the branches, to mimic more solid branches in order to increase the biomass 🌳 About nutrients 👇 I still using organic/veganic nutrients at any watering 💧 A little bit of silicium (Bionova) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) / Bioheaven (Biobizz) , a little bit of P-K 3-5 (Bionova) /Fioritura (Biomagno) / Bloom vegan (Bionova) / Biomassa (Biomagno) / Florastimo (Biomagno) and i started to use some enzymes present in the Sensizym (Advanced Nutrients) That's it for the week.. See you at the next upgrade 📆 Thanks for stopping and watching this grow cycle 😎👍👍 FC ✌️ 🇮🇹

Last week of flo >> harvest the 29th october This strain is highly resistant of mistakes.

Fist day 12/12. Lady’s react very well after putting the net that’s why I decided to put them in flower. I top dress with Worm casting 50/50 of 444 and 284 -1Tbsp per gallon Rock dust -1Tbsp per gallon Mineralised phosphate-1teaspoon per gallon I sprinkle the rootball with myco and water with compost the of warm casting and molasses. This week I’ll defoliate the fun leaves and lollipop the bottom of all plant to increase air flow.

Morning of day 14- tops look dry but it’s just the very surface. They took a little longer than I wanted to dry out. The weather has been cold windy and rainy, not much sun lately, and we are still about a month away from our potential last frost date. Farmer’s Almanac says last frost date is May 30th or something crazy, even though the days are normally rather warm by now. I haven’t fed as of Day 14 because they are not dry enough, there is plenty of amendments in the pot, especially towards the bottom, except I will still spoon feed a little bit. I just rehydrated the tops as they were really dry at least 1-2 inches of the tops were dry, but the bottoms are still plenty wet, so with clean water in a spray bottle, I just lightly rehydrated the top a lil, so I might be feeding tomorrow for day 15, but I don’t know yet. Keeping the tent around 80 degrees Fahrenheit, and only about 25-30% RH. This helps me compensate for the lack of heat provided by the LEDs and help the plants adapt to a higher water demand. I haven’t seen the low humidity effect the seedlings, intact all the plants that grow outside in the hot bone dry climate LOVE IT! They were praising all last year. So to help keep me away from damping issues and to better prepare the little ones for the outdoors, I’m trying to match a hot and dry environment in the tent. With VPD levels way up in the red, I have yet to experience a negative impact. I have damped off enough plants in my life, it’s a lot harder for me in 60-70%RH to water the plants and get them to dry out fast enough in the tent with cold LEDs.