14.3.25: FastBuds Mystery seed grow #1 🌱 We're looking good, nice, strong, and healthy seedling. She started praying after the feeding today. I watered a couple of litres over the last week. I've been watering around the whole pot to encourage root stretching and kick-start the dry amendments and feed the Mycorrhizae. I left the first 2 inches around the seedling until today 🌱 Today, I watered with 500mls of dechlorinated water PH'd to 6.2 with: ♡ Black strap molasses ♡ Ecothrive Biosys 18.3.25: FastBuds Mystery seed #1 is 15 days old today. She is 3 days ahead of my RQS Northern Lights, which I have topped or fimmed. I planned to do this one, too, but it's not quite ready yet. Otherwise, she's looking very good. We'll see how this week goes and hopefully get it done by the end of the week. 23.3.25: FastBuds Mystery seed #1 is ready to be topped today. I went ahead with alcohol sterilised scissors and cut the two tiny leaves from the centre of the plant. Everything went very well and a clean cut was made. The plant is looking great afterwards. Thanks for checking in ✌️🌱🤞💚

Week from 10/07 to 16/07 Going smoothly, plant already feeling great in the new pot. I used sticks to make a star cross frame at the base so I can pull branches in every direction Now it’s a matter of letting everything grow and adjust the branches until around the 20th of August when it will start flowering

🎩🌈🍬⛽️💨👅💦

DISCLAIMER START As already stated in previous week comments my EC reading was totally off, this includes CF. It showed about 1500µS/cm when it was actually about 3000µS/cm. I did not calibrate the EC probe since I've bought it and used it 18 months ago, because I thought EC calibration is not really necessary, I was wrong. correct EC/CF values are from 2025-04-01 on wards. (no april fools joke) DISCLAIMER END Moved the plant from the 120x120cm tent to my usually used 120x60cm tent since the plant will not grow bigger anymore, that is also when I noticed the false EC value due to the monitoring setup in the 120x60cm tent showing the high value after I moved solution from one tent to the other, which I double checked with EC calibration solution. Drastically reduced EC from previously about 3000µS/cm to ~2000µS/cm Plant is growing just fine now but the damage is done, looking back at week 2 when I did "1700µS/cm" which pretty much equaled real 3400µS/cm it is kind of crazy that it even did as good as it did, would have imagined worse with a value this high. This also rules all genetic, light etc. etc. possibilites out for me, I was pretty sure the error was on my end that I missed something and I am very confident to say it was the super high EC value. I already set up a new system in the 120x120cm tent and will transplant the small "Permanent Jealousy XL Auto" seen in the timelapse in to that some-when next week, a "Red Gorilla Girl XL Auto" is also going to go in there but as seen in the timelapse these seeds kinda don't want to, the first didn't do much beyond sprouting and the second one is also super fragile and slow, stay tuned for that diary. Values are average of the day. DATE - EC(µS/cm) 20250329 1549 (false value) 20250330 1554 (false value) 20250331 2449 (false value) 20250401 1940 20250402 1949 20250403 2000 20250404 2010 DATE - PH 20250329 5.92 20250330 5.90 20250331 6.14 20250401 5.97 20250402 5.98 20250403 5.97 20250404 5.98 DATE - ORP (mV) 20250329 55 20250330 57 20250331 261 20250401 256 20250402 223 20250403 166 20250404 137 DATE - °C - RH% (Tent Temp/RH) 20250329 25.0 45 20250330 24.0 48 20250331 23.7 53 20250401 24.1 47 20250402 24.5 47 20250403 23.9 43 20250404 24.2 40 DATE - °C (Reservoir) 20250329 20.9 20250330 20.2 20250331 19.2 20250401 19.3 20250402 20.6 20250403 20.4 20250404 20.2 DATE - CF 20250329 15.49 (false value) 20250330 15.54 (false value) 20250331 24.51 (false value) 20250401 19.40 20250402 19.49 20250403 20.01 20250404 20.13

I think about the fact that it is no longer necessary to cut leaves. I cut it a lot, but I notice that many people cut a bunch of leaves at one time, although somewhere I read no more than 10% at a time. When I gave fertilizers, I always diluted them with water even more to reduce ppm Day 68: I added cal-mag to the diet because the leaves are really turning yellow from the bottom. 0.5 ml Day 70: I added 1 ml cal-mag

Alaskan purple auto is doing good. She is growing great under the Medic Grow Mini Sun-2. She has started to shoot her pre flowering pistils. Also she is starting to stretch. Everything is looking good, and hopefully I can place in the contest. Thank you Medic Grow, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Day 42 - Nutes mixed and fed - Have a bug to remove - awaiting Petratools Fogger - Preflower is happening now - Vibe: 😅 Day 44 - Ladies looking a bit droopy and sad - Nutes given - Most likely week 1 of flower for Gorilla Cookies and Wiz Stash Remix - Vibe: 🍃😩🤞🏽🙏🏽 Day 46 - After advice provided from @GrowingGrannie & Others, I watered with purpose - The really sad Gorilla Cookies took the most water, and was in fact dried out - Did not see praying for at least 24hrs, but did eventually see praying in the top portion - As well as lifting of the lower leaves from a curled position to a straighter position - Vibe: 😰 - Readings -- Lights 24/0 - Level 9 -- Temp: 70 (ideal) | 66.9 (avg) -- Humidity: 55% | 53.4% -- VPD: 0.8 | 1.03 kPa - Vibe: 😳 "Persistence and resilience only come from having been given the chance to work though difficult problems." — Gever Tulley

This girl looks fantastic on tje beginning of the 2nd wewk of flower she's developing beautiful flowers,she's being fed 100% organically I applied my lactobacillus serum and also bat guano liquid by guanokalong she's doing very good so far,let's see how she ends up however I think that she's a very good automatic plant to train with lst she's getting pretty big and bushy,she's responding very well. Peace cannalovers 💚✌️💎🌱❤️💛 I love the Short size of the internodes by the way and her smell noe on her final days of 2nd week is starting to get very stinky but very very citrusy and sweet at the same time is a very special genetic for sure

Week 3 flowering for the strawberry cookies 🍓🍪 from super sativa seeds club Using Tent X from Trolmaster to control the temperature and using Xpert nutrients for the food. We started slowly to add some addictives like bloom booster and cal-mag amino. Next week we will add some more addictives. Temperature marks around 23.8 on TentX

Week3 baby

A pesar de que es una cepa automática, soportó transplante, podas y LST... Ninguna queja con la cepa ni los productos utilizados... Sí hago una autocrítica hacía mi persona, sé que con más atención al cultivo hubiesen sido mejores resultados. PD: No pude hacer un seguimiento adecuado por problemas con la aplicación en el celu

This was the first week with no nutes, just straight out of the tap water. I also upped the watering schedule to 3 times per day for 1 min each. I am thinking after watching this weeks timelapse that I will run the pump for 2 means on the parts of the schedule that the lights are on and see if that helps any. I also noticed that 1 of my plants, the one with the bigger buds and more crystals seems to be having its leaves turning yellow which I have tried to show in the last picture above. I believe it is because I have stopped feeding any nutrients and so now it is sucking what it can from the leaves. The other plants, especially my featured one do not seem to be doing this as of yet. I was hoping my closeup star of this diary, which happens to also be the tallest stem of the girls would also show the most growth, but as such, not much can seen to be happening. 1 more week to go before I cut and hang them to harvest and I will let you know how things turned out weight wise.

Lamp Brightness: 100% @ 16" - estimated 914 PAR (GMO 2 tallest plant so top of this is used for 16" light distancing) Feeding schedule once-a-week, other waterings strictly water-only Watering volume varying up to 3/4 gallon per day Day after feeding, soil is given a sst + fresh organic kefir whey 4oz+ per gallon (kefir grains grown in local organic grass-fed milk) IPM once-a-week visual inspection - no foliar applications note: lowering humidity this week, beeswax coated hemp twine used to tie up some heavy branches on GMO 1

I had a great feeling of accomplishment as I harvested Daphne today. She was the first plant I have brought to life in many years and I was impressed with how the A.B.L.E. Grow Chamber worked. I will let her dry out for a week then I will update more.......It has been a week and I am more than happy with her smoke. VERY SMOOTH no harshness. Great after taste. Even though she was a small plant she still did extremely well in all other factors,: great color, no disease, good tie down technique made for 6 tops with one main one. I will use a single 5 gal bucket for my hydro next grow to see if I get better root growth than with the 6 plant reservoir I used for this operation. The grow chamber allowed me to control the humidity, air temp, pH and PPM with relative ease. I am very happy with my first grow operation with the ABLE Grow Chamber and hope my diary was informative and entertaining for everyone. Main thing i did wrong was my fuck up with keeping the LED too close when she was a seedling. I had it at 10". (it was my 1st time w LEDs.) Secondly, I never got good root growth but not sure why. my theory is that light was seeping through the white plastic cover on the Rainforest 66 reservoir. The best thing I did was controlling all the factors needed to grow with my A.B.L.E Grow Chamber Prototype. It made great use of limited space and saved electricity with its low power usage. Look forward to using it one more time before we make the first salable model. 0

Mi experiencia con esta variedad, fue realmente buena. una semilla con mucho vigor, muy resistente a plagas, y con sabores y olores exquisitos

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.