This is a very easy plant to grow, in my case i had some problems the last 4 weeks with heat that i couldn't resolve. I have had temperatures around 34 degrees Celsius when my light has bean on and around 25 when off.

Sufrió stress por sofocacion a caus de rotura de cooler. Se corrigió indoor intracción y extraccion... Solucionado en el día Ventilando la maceta

Girls are still bouncng back lightly. Truthfully I do believe the lack of nutrients the four weeks that they needed calmag cause them alot of stress and will take a toll on the end product but aside from that things still look to be progressing beautifully aside from the deficiency.

Flower moving along. Added big bud from advanced nutrients to res on day 39. EC is 2.9 DLI is 60.

Been brewing my ewc tea with as many other ingredients including ewc,kelp,fishbone meal, oyster shell, crab meal, glb fish, and makos. Fed them the tea in the morning and they loved it. That being said fourth node was developing so I topped. After doing some research I may have topped to early but they seem to be bouncing back just fine actually. I did six of the seven. Last one has been slow from the start so probably won’t have much of a yield. Plan on using tea often

Start of week 4, day 22. The girls grew tremendously during the last week, very nice branch growth, internodes and overall plant size. No trimming this feeding, just removed 2-3 dying leaves from the lowest branches. One of the girls is clearly shorter than the others, I think I will keep her in veg after this week and flip the other two to flower.

I harvested her today, the trichomes were to my liking. She is STINKY, she is definatly taking after her diesel heritage, granted, she does have a super fruity tropical smell. She developed some purple tinges to the calix with the lights out temp in the 60's. Super starchy, and lanky. She needed support 3 weeks into flower. The buds are fat and solid. There was some foxtailing at the end, but its expected. She is super frosty and I'm happy with the outcome thus far. I'm trying out whole plant hang drying instead of individual branch hanging. Definatly saving me some time.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE BS AFTER THEY TOLD ME I NEVER EVER HAVE TO BUY OR WORRY ABOUT FERTILIZER EVER AGAIN. THEY ARE A RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Estamos a meio da 2° semana a crescer bem ja cm boa ramificação mas a dar indicios de falta de magnezio, mais uma semana começa o lst Afinal vai começou mais cedo q o esperado.. a crescer muito rápido, mais uns dias estamos no inicio da 3°semana

Day 57: Flowers forming, everything good so far :) Day 61-62: Light LST, plant seems to be chill. Noticed a couple of ants, I hope they don't bring aphids ._. Day 63: Buds growing, we'll see...

1/30/2023 - Day 28: beginning of week 4. All plants are doing great. They all seemed to react great to the first topping. The two Grand Prix are definitely more stretchy. The Ice Bath and Frozen White Runtz already have some nice braching starting, but they have a slight droop today. Think I may have slightly over watered. I'll give them all a few days to dry down. Will be transplanting into their final 3x3 bed in another week or two. Just chopped and dropped the cover crop last week, so letting that mulch in a bit first. 2/1/2023 - Day 30 veg: mov3d the plants into the 3x3, but just placed them on top of the bed for now. Foliar fed all four plants with 6.5 ph water and Pure Protein Dry. 2/2/2023 - Day 31: watered with a mix of ThermX-70, Rootwise Mycrobe Complete, FishShit, BuildASoil Big 6, Rootwise Bio-Catalyst, and Yah-Whey. 2/3/2023 - Day 32: started my weekly IPM. Foliar spayed each plant with warm water mixed with Tweetmint Plant Wash. Also, the droop I was experiencing the other day, which I thought was the plants being thirsty, may have been something else. I think they might be slightly overwatered. They still have been drooping and the growth seems to have slowed. Letting them dry out more before I water again. I would like them to be a little healthier before transplanting again. 2/5/2023 - Day 34: all the pots were feeling light today, so I watered all 4. Water was a ph of 6.5, mixed with Jay Plantspeaker Quillaja Extract, Yah-Whey, and FishShit. I also checked the roots before watering and they are ready to transplant. I did not have enough time today, but plan to get then into the 3x3 bed next week.

The plant has recovered well from the last capping and defoliation🏻‍♀️ A few leaves have yellowed a little, but that's not so bad🏻‍♂️ It will get a compost tea🍵 in a few days when it is sent into flower and then everything will be fine again😊💪🏻🏻 The compost tea is brewed and was given to the Watermelon Runtz at day 49 of Veg🍉🏃‍♂️

Very tasty dense buds good high tastes judt like strawberry

So basically what happened is she got tossed into the cloner seen in this video and remained there for about 5 weeks only receiving water for about 2 of those weeks waiting for some late flower monster clones to take root. Then I transitioned both into a light nutrient mix of FF Grow big and Big Bloom. She stayed in this cloner only receiving mild nutrients and a ppfd of around 250 because I underestimated the flowering time of the tent I had been waiting on. She recieved no attention whatsoever other than periodic nutrient changes. If you have noticed I am backlogging a little bit and working towards the present.

Coming to a finish soon. Brown effected leaf spots have burned to a paper-bag brown color/look. Issue was resolved at first sight, so it remained at the canopy. A bit ugly looking, but nice frosty flowers still. Flowers are VERY dense on the top half of the canopy. I took a small top to test trichs and it was like slicing into a cucumber. No air whatsoever. Overall the plant is extremely healthy despite some ugly looking leaves at the top caused by low ph and possibly lack of calmag a few weeks ago.

This plant is producing flowers very fast. A week before you could barely see pistols, now you can see them clearly stacking in every branch. She trippeled her size in just 2 weeks. Overall she is not a thirsty plant and accepts the substrate really well. I did not use fertilizer , only some silicate, but no NPK fertilizer . But still, her leaves are in a healthy dark green colour, even though only a light-mix has been used. Maybe I will add some small amounts of P and K mono, but I don't think it's necessary. So far no purple to be seen, I hope it changed in the further bud-development.