She was a treat and is smelling like one

La pequeña esta ya casi lista, que ganas de probarla, la grande le quedan dos semanas y la he lavado para corregir el exceso y la dejaré solo con agua a ver que tal sale.. planeando ya el siguiente cultivo que comenzaré en breve.

Привет садоводы мой Purple OG Punch цветет и пахнет за неделю вроде немного подрос будем дальше наблюдать

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This plant is an autoflower and was under a 12/12 light schedule because the other plants in the grow tent were photoperiods that were already flowering, and that was bothering me. I felt like it was extending the flowering period too much, and its size is already great, so I moved it to a separate tent. Now I'm giving it 18 hours of light with 3 different lights: - one 150W LED, - one 150W flowering LED, - one 5m LED strip with 60W at 3000K to help the center of the plant ripen faster. I'm keeping the watering schedule at every other day with 2 liters, following the Advanced Nutrients feeding chart. I imagine about one more week with fertilizer and another week of flush before harvesting I also preferred to cut some ties that were too tight. (lst)

Some LST and defoliation very start of week happy with the result will repeat process end of next week 🌱🌳

Week 16 (Harvest) 30-1 First day of darkness. Temperature: 27.9 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 48% (lowest) 31-1 Second day of darkness. Temperature: 24.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 65% (highest) 50% (lowest) 1-2 Drying day 1 The Saparot is ready to be harvested! Before chopping her down, i took a lot of pictures. I was able to remove most of the soil to see the rootball. I hang plant as a whole to have a slow dry. The exhaust fan is on setting 4. 2-2 Drying day 2 Temperature: 19.1 to 17.5 degrees Humidity: 62% to 57% I changed the exhaust fan to setting 2 because setting 4 was a bit high in my opinion. 3-2 Drying day 3 Temperature: 19.9 to 18 degrees Humidity: 62% to 59% I changed the exhaust fan to setting 1, as someone told me that it was enough air movement for drying. 4-2 Drying day 4 Temperature: 19.8 to 18.5 degrees Humidity: 62% to 59% 5-2 Drying day 5 Temperature: 19.9 to 18.8 degrees Humidity: 62% to 59% Today i checked on the drying plants and the buds are shrinking a bit, they are getting a little bit crispy on the outside aswell, I hope they wont dry as fast, and i aim for a 12/14 day dry. Cant find the temps for 6-2 to 2-13. I do have a video when she was at the half of the dry process. 14-2 Trim day, yay! She was easy to trim, the buds are nice and dense, and there was not a too high bud/leaf ratio! She dried for 14 days. End results: Dried buds: 81 Grams. Dried Trim: 18.5 Grams. I am really surprised how good these genetics are! If you like CBD, i really suggest trying JYM Seeds out! The Saparot smells very fruity almost like a fruity coctail. The buds are super dense, and very bag appealing. After some months of curing the sweet fruity smell changed to a more sour smell, but still smells amazing! To be honest, i cured her a bit poorly, burped too less, and because the buds are so compact she holds moisture better then normal, so she tastes harsh, but thats on me. I have a pack of JYM's Sour Fruit aswell, so i will for sure try it out again! And my hope is already very high :D Thanks for following my diary, and feel free to check my others out aswell! See you at the next one!

Day 30 of bloom! Buds are stacking, and the smell is strong already. Carbon filter has been installed. Another 30 days or so to go. No issues in sight. VPD: 1.4 EC 2.6 PH: 5.9-6.1

-Tag 70 Pablitos letzte Stunde Nachdem wir die Trichome kontrolliert haben und gesehen haben dass sie reif sind, haben wir sie geerntet. Nass Gewicht waren es 155g. Nun hängt sie im Zelt zum trocknen 😍

Blue Dream Auto is growing well. Temps are getting cooler with winter moving in. Hopefully I can keep the temp up so they all grow better. Time will tell of course. Everything is looking good. I did some lst and defoliation on her today. She should start her preflower in the near future. Thank you Seedsman, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

2/24/25 - Gave them 1 liter each from the top with fermented plant extract at 1tbsp per gallon of water and then fill the res with a little under 2.5 gallons all PH'd at 6.0, added a small heater outside the tent to raise the temp inside a bit. The girls are starting to take off in growth over the last couple days after transplant. I leave for vacation in 4 days so lets hope the homemade earthbox works. 2/27/25 - Leaving for vacation first thing in the morning so i will be doing a top water tonight at about 1 gallon per plant and they will also get the fermented plant extract at 1tbsp per gallon. then i will be filling the res with water until full, plants tops have been tied down for some LST and branches have been tucked but ill just have to let them grown for the next week. No one will be taking care of the plants so hopefully the SIP last for the week, if not they will get a nice dry back and get watered once i return.

Just started my account here! Might as well start where im at. 6 weeks in shes starting to swell. I found this seed in a bag of some good stuff.

Added yellow sticky fly traps to all cubes as a preventative measure to avoid infestation of fungus gnats. So far none have been spotted. Defoliated and did a little more LST to all the plants to open up the center and give more light to lower shoots. Blue Dream 3 and Chemdawg 3 started showing some discoloration on the leaves (yellowing around the veins) and also the leaf tips curling down. Did some research and came up with this... Possible diagnosis: - Yellowing around leaf veins could be a sign of Magnesium or Iron deficiency - Leaf tip curling down could be a sign of Nitrogen Toxicity. - Both could be caused by improper ph balance in water Possible solutions: - Applied Botanicare CalMag+ as a foliar feed and added some to the reservoir. CalMag+ contains Calcium, Magnesium and Iron. - Diluted nutrients in reservoir to lower amount of nitrogen being fed to plants. Was feeding them at 1300ppm, lowered it to 1050ppm - Tested runoff and saw it was coming out at 5.4pH so I increased the pH in the reservoir to 6.0. Now the runnoff is testing at 5.7pH, meaning that my rootzone is in the optimal range of 5.5-5.8 Well wait and see how the plants react to these slight tweaks. Hopefully we start to see a nice healthy even green again.

Привет садоводы Кажется цветок вырос отличный, просто красавица и наверно он уже готов еще несколько дней после полива и финиш

12-28 Scc got plain ph water. 3x got none. Just a day to show off their moves. 😂🤘 Scc is happy. I suspect she may not like plain water though. 12-29 3x plain ph water. 12-30 Scc half tsp build a bloom ( I put ml last week, think it was stuck in my head 😂), 1/2 tsp recharge, 1/8th tsp kelp and 1 ml drops. Upped the dose of build bloom from 1/4 to half tsp. Was only 310 ppm after stiring and desolving for several hours. Felt low, but taking it slow. 3x gets all the goodies on her next! . 12-31 Started a 2 gallon tea. 1/4 cup poo, 1 1/2 tsp build a bloom, 2 ml drops, 1/8 tsp kelp, 1/2 tsp recharge, 1 tbs molasses. Bubble bubble. Ppm is 612 brewing. 24 hrs Bring in the new year with some goodies! 💪🤘 Happy New Year! 1-1 Gabe them both the tea. Ppm was 623 ph 6.2. Mmm

Nutrients up untill flowering, bad idea. Substrate is 50/50 dirt and hydro, so hard for the roots I think. Not a big harvest, but trichomes were getting brown. These last series of harvest was really small!!!