🇩🇪 Cherry Limeade – Doja
Die Cherry Limeade von Doja entwickelt sich weiterhin hervorragend 🌱. Die Buds legen deutlich an Masse zu und werden von Woche zu Woche größer und kompakter 🌸. Gleichzeitig wird der Geruch immer intensiver 👃.
Das Terpenprofil ist aktuell sehr spannend, aber leider nicht ganz das, was ich mir erhofft hatte. Sie riecht spritzig, limettig und leicht sauer, dazu kommt eine Kräuternote 🍋🌿. Was bisher allerdings komplett fehlt, ist irgendeine Form von Kirsche oder süßer Cremigkeit 🍒. Ich hoffe wirklich, dass sich diese Aromen im weiteren Verlauf der Blüte noch entwickeln, habe mittlerweile aber meine Zweifel 🤔. Vielleicht überrascht sie mich ja noch – ein paar Wochen bleiben schließlich noch.
Woran ich allerdings überhaupt keine Zweifel habe, ist die Potenz, die sich bereits jetzt ankündigt 🔥. Wenn ich vorsichtig an einem Zuckerblatt eines kleinen unteren Buds reibe, kleben die Finger schon ordentlich zusammen 😄. Und das, obwohl wir noch einige Wochen Blüte vor uns haben. Die Harzproduktion scheint also definitiv auf Hochtouren zu laufen ✨.
Ansonsten läuft der Grow mittlerweile fast vollständig auf Autopilot 🤖. Ich erhöhe den VPD jetzt leicht von 1,2 auf 1,3 kPa, lasse die Lichtintensität mit durchschnittlich 900 PPFD aber unverändert ☀️. Gleichzeitig habe ich die Umluft etwas erhöht und lasse die Lüfter oben und unten nun auf Stufe 6 laufen 💨.
Beim Tensiometer bin ich allerdings weiterhin etwas ratlos 🤔. Ich hatte es letzte Woche nach Herstellerangaben neu platziert und anschließend die vier Blumat-Tropfer entsprechend neu eingestellt 💧. Nach einigen Tagen zeigt mir das Tensiometer nun allerdings trockenere Werte an, als ich aufgrund der Fingerprobe und des tatsächlichen Wasserverbrauchs erwarten würde.
Ich habe den Wasserverbrauch deshalb über mehrere Tage genau beobachtet und komme aktuell auf etwa 1,83 Liter pro Tag 🚰. Für die Größe der Pflanze erscheint mir das durchaus realistisch. Deshalb vertraue ich momentan meinem Bauchgefühl und lasse die Einstellungen erst einmal so, wie sie sind 🌱. Hat jemand eine Idee, warum das Tensiometer trockenere Werte anzeigen könnte, obwohl Fingerprobe und Wasserverbrauch eigentlich etwas anderes vermuten lassen? 🤔
Nach diesem Grow werde ich mir auf jeden Fall noch einmal Gedanken darüber machen, wie ich die Bewässerung meines Living Soil Beets weiter optimieren kann 🛠️.
Heute gibt es außerdem wieder 3 Liter Almicanna Flower Komposttee 🌸. Diesen habe ich 48 Stunden gebraut und werde ihn jetzt ins Beet geben 🫧.
Ansonsten heißt es weiterhin: möglichst wenig eingreifen und einfach zuschauen, wie die Cherry Limeade ihre Buds aufbaut 😎🌸. Ich bin sehr gespannt, was in den nächsten Wochen noch aus ihr herauskommt 🚀.
📊 Parameter der letzten Woche:
💡 Licht: 900 PPFD / DLI 39 (12/12, Stufe 6, 40 cm Abstand)
🌡️ Temperatur: 28 °C
💧 Luftfeuchtigkeit: 67 %
📈 VPD: 1,2 kPa → 1,3 kPa
🌿 CO₂: Ø 740 ppm
💦 Bodenfeuchtigkeit: 120 mbar
🇬🇧 Cherry Limeade – Doja
The Cherry Limeade by Doja continues to develop exceptionally well 🌱. The buds are noticeably putting on weight and becoming larger and denser with every week 🌸. At the same time, the aroma is getting stronger and stronger 👃.
The terpene profile is currently very interesting, although unfortunately not quite what I was hoping for. She smells zesty, limey and slightly sour, with a herbal note 🍋🌿. What is completely missing so far, however, is any hint of cherry or sweet creaminess 🍒. I’m really hoping these aromas will develop later in flower, but at this point I have my doubts 🤔. Maybe she’ll still surprise me – there are still a few weeks to go.
One thing I have absolutely no doubts about is the potency that already seems to be developing 🔥. When I gently rub one of the sugar leaves on a small lower bud, my fingers already get very sticky 😄. And we still have several weeks of flowering ahead. Resin production is clearly running at full speed ✨.
Apart from that, the grow is basically running on autopilot 🤖. I’m now slightly increasing the VPD from 1.2 to 1.3 kPa, while keeping the light intensity at an average of 900 PPFD ☀️. I’ve also increased the airflow slightly and both the upper and lower fans are now running at Level 6 💨.
I’m still a little puzzled by the tensiometer, though 🤔. Last week I repositioned it according to the manufacturer’s instructions and then recalibrated the four Blumat drippers accordingly 💧. After a few days, however, the tensiometer is now showing drier conditions than I would expect based on the finger test and the actual water consumption.
I’ve therefore monitored the plant’s water consumption over several days and I’m currently averaging around 1.83 liters per day 🚰. For a plant of this size, that seems quite realistic to me. So for now, I’m trusting my gut feeling and leaving the settings as they are 🌱. Does anyone have an idea why the tensiometer could be showing drier conditions even though the finger test and water consumption suggest otherwise? 🤔
After this grow, I’ll definitely take some time to think about how I can further optimize the irrigation system in my Living Soil bed 🛠️.
Today I’ll also be giving her another 3 liters of Almicanna Flower Compost Tea 🌸. I brewed it for 48 hours and will now apply it to the bed 🫧.
Other than that, it’s mostly about staying out of the way and watching the Cherry Limeade build those buds 😎🌸. I’m very curious to see what she can produce over the next few weeks 🚀.
📊 Parameters from last week:
💡 Light: 900 PPFD / DLI 39 (12/12, Level 6, 40 cm distance)
🌡️ Temperature: 28 °C
💧 Humidity: 67%
📈 VPD: 1.2 kPa → 1.3 kPa
🌿 CO₂: Avg. 740 ppm
💦 Soil moisture: 120 mbar