This week's been exciting, they've grown upward a few inches and started to bush out. I did do a mild defoliation taking off a few lower leaves and tucked some of the top bigger fan leaves. I started adding co2 this week and they seem to really be enjoying the added amount. All in all Happy Growing.

Blütewoche 4 Die Beiden Pflanzen entwickeln sich super. Als Dünger bekommt jede Pflanze aktuell im täglichen Wechsel: 1 x 2l Hesi Bloom + Plagron Calmag pro, 1 x 2l Hesi Bloom + Greensensation.

Last week before flushing🌈

I think that both of my plants are almost ready for harvest. I don't have a USB microscope so I can't check thoroughly. Luckily I have a few lenses of a microscope and a very good phone camera. I gave them no nutes with the watering because I did the same with the other plant. The following update might just be the harvest 👀, the trichomes are looking good.

just started drying. Will update when they dry

transplanted into 7l vessels. this week I will cut the top.

Start new week

First BlackMuffin came doown. day 51. The nostrills filled with flavor. Na sure if i am catching a hint of mint aswell. drying. And can't wait to smash these nugs. By far the biggest nugs i've grown. Still a newbie though😂. Thanks fr stopping by cheers

The humidity this week has been brutal. It appears I have a little bit of mold stating just on the fan leaves at the base of the plant. Waiting on a dehumidifier to arrive. Hopefully this doesn’t affect the plant too much. The plant on the right continues to stretch, but as you can see I’m running out of room. Not sure what I’ll do if it continues to stretch! Any suggestions welcome!

This week she has been bulking those nuggets peppered all over, I am hoping she can be healthy enough to swell those Calyxes, because she was stressed few times during her growth and the last one is the change from hps to leds... She had to adapt to those intense leds... Found spider mites on one plants next to her but they are not interested in her, still found few on her and did a careful inspection/eradication but only 4 were found... I think she stink too much for them lol that gassy fuel from the swamp is not on their list! Only water this week she was given. I am trying not to rub those sugar leaves for a sniff too often!🙄😜 It seems the less I touched them the better they are😁, so I use a wooden stick now when I need to move leaves or buds. She is becoming one of my favorite plant, she is fussy yes but very special smell and look, I am so pleased I have made cuttings this time in case and if her high is as good as her smell she will be the first mother plant I will try to keep!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

03/20/2022 Biscotti Skunk looking lovely first four pictures.next up is lemon OG,followed by the three Grape Skunk girls middle one is my favorite so far (Middle in height) I did a light feeding of fish and seaweed, a little extra something just incase they get hungry in final weeks.

In a 1m x 1m tent, Lumii 315w , (using marshydro SP150 in flower stage), secret Jardin fan, carbon filter, intake fan 5”, humidifier. So out of the four seeds popped last week three where successful in rooting. Added a sprinkle of great white shark to help with root stimulation and just water. Root are starting to show on the side of the cup so almost time to transplant to bigger pots (moving into fabric pots) Transplanted in to fabric 20l pots with feeding powder at a low dosage. But unfortunately one transplant didn’t go to plan and part of the tap root snapped (but not going to give up on her yet) 1L of water in cups 4L of water in fabric pots 20L 33g bio grow

Looking shiny and healthy to me. I remember the temperature was realy high and i'v got Problems with the GSC-Auto. Ohh, Wonder xD. Next Pictures are better.

👋. После последнего посещения прошло 13 дней. Шли дожди, и возможности их проверить не было, только сегодня я смог туда поехать. Я был приятно удивлён 😊. Кустики после топпинга заметно подросли,. До дожей я их побрызгал с пульверизатора водой с удобрениями, обильно полил, а днем пошёл дождь ☔ . 👍☺️.Я их не поливал, там много воды,.Видео тоже есть.

Some leaves got burnt but everything is good, just flipped to 12/12. I think the pH down is causing the leaves to burn or maybe my pH pen is not working properly (I've already calibrated it) so I'll stop adjusting pH, in the next couple of days there should be some pistils. I wanted to let them grow for around 9 weeks but I think they'll grow too tall for my tent. Forgot to add that I kinda supercropped one of them because I didn't want to defoliate anymore.