The branching beast is doing well, but it's time again to bring her in a good shape. Also I'll set the LST new cause of the fast growing one of the branches started splitting up. So see ya next week when I maybe repot her in a bigger pot and cleaned her up!

Day 36-13/05/22 damn they looking good i think I’m going to raise the light today I will have to check!!! Day 38-15/05/22 gave them a nice bit of water today they needed it!!!! . Day 40-17/05/22 all looking good so yellowing of lower leaves but think it’s because I watered them a bit to late the other day!!!

These are the seeds from my auto breeding project earlier this year. That diary link can be found here: https://growdiaries.com/diaries/129779-grow-journal-by-m0use Germinated by scarification of the seed with an emery board then soaking in water for 12hrs, I added in the step of paper towel for another 12hrs then planted outside with Dynomyco in the hole. Watered in with some LABS "Lactic Acid Bacteria Serum [Lactobacillus]" and Transplanter MS-CS RootRescue. They all popped up within a few days after planting outside. They are in a heavy soil and should not need much love outside of a fertilization every month. I ran out of mesh to protect them so bamboo spikes will keep the birds at bay... hopefully. I also have a twin setup of these seeds but in a bucket fortified with acti-sol, they will be running side by side for comparison.

Added the epsom salt and calcium supplement to fix my yellowing problem and so far it’s turning it for the better!!! 😂

----- Week 7 ------ Still on rebound from nutrient deficiency , ( Magnesium) / Nutrient Lockout & maybe salt build up . I made too strong soil, With my additional amendments ( Which Gaia has most already ) . Basically double down on 4 of them . Working on the canopy and making sure the lower leafs are getting light , and even. It feels shes a week or two behind --------------------------------------------------------------- ----- AI Trouble Shooting ----- --------------------------------------------------------------- I use Claude AI to help with python / php programming, so I figured I'd run my soil recipe through this AI. Asked if there would be any issues, Pretty good response! Here was the response. ( I troubleshot the plant prior ) " Potential Issues: Salt Build-up: Worm castings + Bone Fish Meal together can lead to salt accumulation Watch for leaf tip burning or nutrient lockout Nutrient Overlap/Excess: Multiple calcium sources (Gypsum + Bone Fish Meal) Could potentially lock out magnesium uptake if too concentrated pH Considerations: Bone Fish Meal can lower pH over time Gypsum is pH neutral but can affect nutrient availability Deficiency Risks: Magnesium might become deficient due to high calcium levels Iron availability might be reduced due to pH fluctuations Nitrogen could become limited during heavy flowering "

the dinafem seed did not make it. It was replaced with a royal queen seed hulkberry (which bore a lot of fruit in the last harvest). The other seeds are all fine

Lemon pie chose to pop up later than the others (2days) I won’t be topping any autos this run! I will be only low stress training until scrog and then I’ll high stress train if necessary! I’ve given the first feed today of biobizz (doing fastbuds organic the other 3 synthetic) my aim is to keep the veg period vigorous! As a great veg equals great bloom!

Bonjour à tous les padawans et les maîtres jedis Pour cette semaine 3 au jour 19 ma plante fais 21 centimètres et son septième noeud apparaît je décide donc de pratiquer un LST sur ma plante. Pour ce j'utilise du fil de fer galvanisé que je plante directement dans le substrat en faisant attention de ne pas endommagé les racines car n'oublions pas que ce qui pousse dessus pousse aussi dessous. Jour 17 je pulvérise du une solution composé d'une cuillère à café de savon noir mou (marque briochin) dilué dans un demi litre d'eau en prévention d'éventuels nuisibles. Pourquoi le savon noir mou ? Savon noir : quelle utilisation pour le jardin ? Le savon noir est un produit naturel dont les propriétés nettoyantes sont connues depuis l'Antiquité. Utilisé pour l'entretien de la maison et pour les soins corporels, ses vertus antibactériennes et insecticides en font un allié précieux pour le jardinier bio. Le savon noir est fabriqué à partir de potasse et d'un corps gras de type huils végétale comme l'huile d'olive, de lin ou de maïs. Produit naturel et biodégradable (s'il ne contient pas d'additifs, comme cela peut-être parfois le cas), c'est un très bon produit nettoyant, pour les sols, la cuisine, la vaisselle, le linge, etc... Très polyvalent, il est également économique, comparé aux multiples détergents classiques du commerce. Le savon noir se trouve sous forme de pâte molle et brune ou sous forme liquide, dilué avec de l'eau. C'est du savon noir liquide dont on se sert généralement au jardin, car son utilisation est plus simple. Il s'achète dans les magasins bio ainsi qu'en grandes surfaces ou jardineries. Attention : la recette du savon noir de ménage et celle du savon noir utilisé en cosmétique ne sont pas forcément les mêmes ; les savons noir de ménage (multi-usages) peuvent contenir davantage de potasse afin d'améliorer le pouvoir dégraissant (irritant ou desséchant pour la peau), voire même certains additifs chimiques. Au jardin, ce sont en priorité les propriétés antiseptiques et insecticides du savon noir qui sont utilisées. Le savon noir liquide est utilisé pour lutter contre les pucerons, les cochenilles, les araignées rouges, les aleurodes, les psylles et autres thrips. C'est un insecticide de contact ; il tue les larves et nettoie le miellat qui englue les feuilles. La recette de l'insecticide à base de savon noir (mou pour ma par marque briochin) est simple à réaliser : une ou deux cuillères à café de savon noir mou (briochin) diluées dans 1 demi litre d'eau tiède (dilution à 5 %) ; une fois la préparation refroidie, pulvérisez-la sur les plantes atteintes, en prenant soin de ne pas oublier l'envers des feuilles. À renouveler 1 à 2 fois si nécessaire, pour être totalement débarrassé des indésirables. Comme il est de mise pour la plupart des traitements, ne pulvérisez pas la solution à base de savon noir en pleine journée, sous le soleil (ni sous la pluie !) ; procédez le matin de bonne heure ou patientez jusqu'à la fin de journée, lorsque les températures sont en dessous de 20°C. Jour 18 Je corrige mon LST suivant la pousse de ma plante ... Pour ma par c'est la manière dont je procède mais petit rappel de la technique du LST Quand commencer à appliquer la technique LST ? De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Que la force soit avec vous💪

The plant on the left exhibits noticeable black tips, indicating a late-stage deficiency during flowering. It’s significantly larger than the one on the right, which shows less signs of deficiency. As the left plant gains weight, it struggles to support some branches and develops foxtails. The aroma in the tent is delightful, with the left plant emitting a sweet, cake-like scent, while the right one exudes a strong gas-like odour. It’s remarkable how different the plants are despite being the same strain.

In the end it was a pretty good run, i have to say though that, probably due to some early veg stress, one of the plants probably suffered from hermaphroditism and impollinated the others, 5hus resulting in a few seeds here and there. Fortunately nothing major. Thnx everybody for the support and following my first diary, stay tuned cause I'm starting two new more grows, bigger and better. Keep the peace 😉✌️

🚨 Northern lights week 9 update 🚨 🚨 week 6 of flower!! 63 days old!! 🚨 Hey fellow growers it's your boy Wackytabacky_420 here with my Northern lights grow from growers choice seeds. Well guys 1 more feeding and I will begin flushing!! This Northern lights has really boosted my confidence doing so amazing this grow compared to my first!! She is stacked and frosty!! Smells like straight dank!! Her buds are weighing down her branches more everyday. She is starting to yellow out as she is draining all her nitrogen to her flowers. She has a beautiful light spectrum from... 💡light sponsor💡 @marshydro_amazonled @marshydro12 #marshydro #TSW2000 Low stress training clips- @madmadameplant @madmanplant Www.madmanplant.com Other companies in this grow- @foxfarmsoilandfertilizer - 100% ffof @acinfinityinc - fabric pots @generalhydroponics - flora trio line @vivosun.official - inline exhaust fan @opulent_systems - 4x4x80 grow tent @growerschoiceofficial - 1 Northern lights seeds 2/17/2022 Water 6.3 ph 180 Ppm Solution temp 73.2°F 2/21/2022 2 ml micro 4 ml bloom 1/4 ml ph down Ph 6.40 400 Ppm Solution temp 74.6°F Well guys that brings this week 2 an end. Best of luck and Happy Growing!!🌱💚💨🔥👊🏼🤟🏻👍🏻💪🏻💪🏻💪🏻

Heya🤙👍🤙🌱 This diary is going to show you guys my journey being a contender in a local Cannabis Cup🏆 22 Jan 2024 Got the tracking number for the seeds and packaging this morning. LET'S GOOOO! Jon Dabs Check them out here: https://jondabs.com @jondabs Instagram The Sponsors Check them out here: Dutch Passion https://dutch-passion.com/en/ Hydroponic.co.za https://hydroponic.co.za/hydroponic/harvesting-and-growing-accessories/ Bud Juice https://www.gohydro.co.za The Best Grow https://thebestgrow.co.za Dynomyco https://www.dynomyco.com Nuclear Roots https://www.nuclearroots.co.za Photronic https://shop.photronic.net Special Thanks to Hydroponic.co.za. I buy all my products from them. Best service. Daily updates coming...

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

👋🏻 All growing well! I have let them grow naturally this week without much interference. I have been rotating the pots every few days and have also added another lower fan to help with airflow. Today I added some sticks to help open the canopy and I plan over the next week to start securing some branches down with wire along with some light defoliation. ✌️🌱☘️

As of this week I can see she's finally recovered after all the stress I put her through (HST, topping, LST) On August 1, watered it 1300ml, ph of the solution was 6.44, I added rhino skin 1ml and 1.3ml each- cal mag, bio root and biothrive grow. Had some run off but she sucked it all in, in less than 5 minutes I barely had time to measure the ph of the run off which was 6.72. Planning on transplanting it this week to a 5 or 7 gallon pot, she's currently in a 1 gallon pot. August 2, watered it 1L, ph 6.46. Added 1ml each- rhino skin, cal mag, bio root and biothrive grow. 6.77ph of the run off, (barely had any, she sucked it all in right away) August 3rd transplanted her to a 5 gallon pot and watered it 1500ml water ph 6.45 Added 1.5 ml each- rhino skin, cal mag, biothrive grow and bio root. No runoff. August 5th, watered it 1800ml water added 1.5ml each- rhino skin cal mag, bio root and 1.8ml biothrive grow August 6, watered it 3L water, 6.45ph Added rhino skin 3ml, cal mag 2.5ml, bio root 3ml, biothrive grow 3.5ml No run off

21.8 7th flowering week done. And both ladies look pretty close to end so I started flushing today. Both show about 50% or more orange hairs but I'll harvest by trichomes ofcourse.. Not much to report here. Steady swelling and building their frosting, nice. It's been easy and pleasant grow and end product also seems like gonna be satisfying 👌 Responded to topping really good 🙏 Well happy growing peace out! 🙏 in that video is my whole tent with Strawberry glue and Shiskaberry 🙏

Day 36 Flowering: Hi growmies Here we are at the halfway point in the flowering cycle. They will be in full PK swing now and be craving those elements to power more pistils and bud energy. I am giving them their last full Pk warrior 9/18 dosage this feed alongside a 3/4strength Megacrop feed. following feeds will be at half pk 9/18 till last 2 weeks. I am also still using calmag to compensate for the l.e.d and coco leeching that often happens with these combinations. In general they are both very healthy and feeding with no issues I now need to up the watering frequency as they do drink way more now. Mimosa lemon is looking long and lanky still but her potential to fill out over the coming 5 weeks is easy to vision. With her stems all set in place and her projection of where she will join nodes in the coming weeks , I think I need to think about supporting them maybe?. She doesn't have a lot of leaf among the stalky colas and looks very like a long flowering sativa does. Hwr smell is now very clear when touched and even close to the plant, you can smell the limonene from her namesake. A stinky lady is imminent i think. filter at the ready. With around 12 mains all going for Merristem status , she could be a contender for best auto yielder this run. Glueberry is certainly living up to her name if I dare to touch her!!. She is beginning to smell so nicely sweet with a hint of diesel too. I think i did stunt her growth early on with the foolish underwatering error. She recovered really well and does have a lot of buds within her canopy hidden. I will make sure I keep her well aired to avoid any mould issues .