Gorilla cookies week 8 flower next week first week of flushing going to do coconut water for 3 weeks after dry back from first flush back , Tropicana Hammer F2 Next auto transplant during flowerI wouldn’t suggest it but if can stretch more from 1 gallon to -4 gallon pot with soil recharge , with fish fertilizer 1 tsp ph 5.8 for shock 🏽‍♂️

🍼Greenhouse Feeding BioGrow & Bio Bloom 🌱GARDEN OF GREEN SEEDS ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)

So I changed lights this week to 600 w hid Hood is air cooled so we’ll see how this finishes! Everything is going great, buds getting bigger every day.

Ohne weitere Zugabe von Dünger

They are starting to shoot some pistils. I added some random store fertilizer that is 1-4-7 and put it in the 3 gallon. I poured it in a water bottle and just eye balled it pretty slow and not for long. It seems to help

I mean, overall this was an extremely painless grow. The test of whether we should or shouldn't top autos is still TBD imo. Our topped candidate produced denser, frostier buds, but weighed slightly less, at 14 grams of bud total. And our lst plant produced 18 grams of bud, not as frosty, and almost as dense as our topped girl. I'll be topping autoflowers from here on out only under the circumstance I have 4+ to grow at the same time. Seems like it could be used to speed up the autoflower grow cycle if done properly, like with right. Since I'm doing a perpetual cycle, it's still a viable option for me in the long run. A few tips I have for anyone growing this strain in organics: Start feeding bloom nutes a little bit prior to flower transition - this makes the transition more seemless. From weeks 1-3 flower, I slowly dropped the grow dosage until I cut off grow nutes week 3 flower. Starting the flush around week 6 flower seemed to really bring out this plant's potential. But I think you could get away with starting the flush around week 5. I hope this helps anyone trying this strain out. It's a good one, I hope to see more journals of it, eventually. Cheers everyone! Time for me to take a well-deserved puff. :) ☁️ 🌼

Absolut super angewurzelt. Spargeln extrem!!! Das wildeste was ich je gesehn habe an spargeln😅 Bin gespannt wie das in der preflower phase wird🙈😅😅

Real flowering started this week. The stretch just started and the crazy bushiness continues. Did some fairly heavy defoliation on the under canopy and select large leaves blocking light to the bud sights.... but controlling the growth is a balance. Trying to keep as much photosynthesis as possible until I can really tell which bud sites will be the real colas. I did a full reservoir swap with flowering nutrients, and a pH balanced water only flush in between (about 18 hours just running pH 5.9 water). Once I put the new nutrient solution in, the plant just shot up. It was spectacular the difference in literally only half a day. I have noticed that a thin coating of something was on the air line of the bubbler and a couple other surfaces. Cleaned it off before the water flush, but still note a very slight film on the top of the fresh nutrient solution. It's a touch worrying but not sure it's an issue. Will watch carefully.

Bomba!! Está semana ya he cortado 1 de las chicas que ya estaba lista para las tijeras. La próxima semana ya estarán listas las otras 2 ,🥂🌳

~ Day 71 Update ~ Hello everyone! Hola! I’m Meus and this is my 10th weekly update for “First Mainline Attempt!”. I’d like to welcome new & veteran growers, Thanks for taking the time to stop by :) ~ Progress ~ You know, I’m astounded by the level of growth in this past week, my mind is blown! 5" of growth compared to the avg of 1" for the past few weeks (9,8,7, etc), just wow 😱. The smell is pungent, dank, and slightly sweet. I can only dream of what these girls will skunk out, soon, very soon... I’d like to flower now but I have a few small issues. First: I wanted to stop at 8 toppings but I need clones of the others so everyone gets topped to keep an even canopy. Of course I’m not taking 8 clones each 😏, just 2-3 of each strain (5 strains, 6 plants; 2 phenotypes) to put in my 2nd tent till these girls (mainlined beasts) are harvested. This is ambitious though I’m optimistic that this will work out 🙏 Second: Related to the first issue I’m going to need a trellis net to support these girls with their 16 tops. Thing is, all my plant have varying flowering schedules (55 to 70+ days). I’ll need to make a net set up that I can cut out each plant individually as they’re ready to harvest. Third: MOLD! Though it’s not a lot I do have a bit of mold developing at the bottom of the fabric pots (which are known to mold). I’m going to switch to Superoots Air-Pot so I can avoid the mold. They’re $10+ a pop so I might have to wait till my next grow to afford the amount I need to make a full switch. Depending on how things go I’ll start flowering at week 13. Now concerning the mold I found a few ways to deal with my problem without harming or altering taste of these young ladies. This will be a tough 11 - 14 weeks, I’ll keep ya updated fam! ~ Individual progress notes ~ (will post full information soon, update delayed for personal reasons) [Purple Urkle #1] Height: 14" Tops: 8 Notes: 14 inches... That's quite a climb :) Though she's stretchy like her sister I'm excited, can't wait to see the development in the next few weeks of veg 😊 [Purple Urkle #2] Height: 13.2" Tops: 8 Notes: I'm surprised at the uniformity of these two sisters, I'm going to veg a bit longer and get me some clones just in case ;) [CBD Blueberry] Height: 9.8" Tops: 8 Notes: I thought this girl was a goner, definitely didn't respond to the mainline well like the others, wonder why? 😶 Still I'm impressed that my smallest plant is filling in, though she looks weird I still love her and her minions <3 [White Widow] Height: 11.2 Tops: 8 Notes: Well... This was one of my smallest girls, she's by far the bushiest and most filled in. For an example look at her root mass, one word, insane! Roots are spreading everywhere, so aggressive and the trunk is huge, perfect for transporting all those nutes. Tanya here recovered from a split too, awesome :) [Mazar] Height: 13.8 Tops: 8 Notes: Taller but just as dense as the white widow, the Mazar has potential! A beautiful, healthy canopy, one of my best girls. It's a good feeling knowing that my hard work is paying off 😭 I'm afraid of topping this one because she is so dense that 16 tops will be off the hook, better make a plan soon 🙏 [Super Silver Haze] Height: 11.2 Tops: 8 Notes: I’m starting to get impatient, I love this strain! Well, most strains developed by Arjan are great <3 I will need to feed soon with diluted nutes, she looks hungry a bit. Other than that she’s a healthy young lady that’s ready to flower :) ~ Final Thoughts ~ Where to start... I’m excited! Getting my clones are my top priority right now, then I'll focus on canopy support. I’ve come a long way from my first grow, even though I failed I learned a lot. Those lessons are keeping me on my toes and I’m learning more everyday. Thank you to those who have been influential to my success, much love! I can honestly say Grow Diaries is the best! What a fantastic community to just happen upon while skimming forums one day. So again, thank you guys so much for the support! The comments are informative and helpful, I appreciate em all :) Thanks for stopping by, much love <3

Week 2 of flower and week 8 from seed , the plants have really started spewing THC and they are looking and smelling amazing . The Black gelatos color has started coming in some are light purple some are very dark purple . If you'd like to know anything specific please leave a comment and I'll do my best to answer it .

wow, the girl seems to be doing very well, she is growing in minutes :D 33 days after germination, I changed the time to 12/12 :) so the girl goes into flowering :).

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

12/09/2025 Last week of nutes and last week of real flowering. Both ladies look just about done. Papaya Cookies is nearly there. Lemon Cherry Cookies isn't too far behind either. But she definitely has the whole week plus a couple days to go. Papaya Cookies might be done by the end of the week, if not sooner. I might have to push her a little more so I can harvest them at the same time. I won't be changing out the water until after lights out as I always do. So today will just be a plain water top off. Well, that's been everyday for like 2 weeks. Lol. But, I noticed both ladies definitely didn't drink as much as usual last night. Another sign that they are almost done. Normally it's close to a gallon a day. This was about a half gallon. Anyway, I won't be recording the morning readings as the water will be changed out today. If it were under the normal night and day schedule, it would be easier to do this, but the AI suggested this time of day for lights out. It's warmer now than at night. Obviously. Lol. So now I have to wait for lights on after the plants have had their rest to change the water out. Then we can take readings. Next week, which will only be 3 or 4 days, I'll be doing a slow wet trim. Or I guess the defoliation I should have done 2 months ago. Anyway, I'll be pulling anything with a reachable stem. I won't be cutting the sugar leaves. That's after drying with my new cannabrush. We'll see how well this baby works. On a final note before lights out, Papaya Cookies has a few buds that are nearly done on the bottom and they are super hard. Really nice smalls. There's a bit of larf, and I can't really reach the buds in the middle, but they seem to be the ones taking the longest. So I think we'll be waiting for those ones to finish. Lemon Cherry Cookies is kind of the same. Lots of bud in the middle that I can't reach. They aren't done and still have loads while pistils. But the buds on top are still swelling, so that's a good thing. We'll definitely see some bigger buds from this little lady. Good afternoon everyone. It's 6:41pm. New water new nutes cut in half. Readings: Papaya Cookies: pH: 5.8 EC: 824 TDS: 409 Lemon Cherry Cookies: pH: 5.8 EC: 874 TDS: 439 So it's 10 pm and I decided to check the pH and whatnot. It spiked to 6.8. What is happening? I cannot get it to stay in range. I don't know what to do here. It has to be something in the roots. I wonder if it's my tap water. It seems to have worsened since I started using it, but I can't afford distilled bottles. I will be ordering distilled for the 3 day flush. But that's only 3 days and I'm saving up for it. Back to the matter at hand. pH spiking. Both plants. The EC and TDS also increased. Not by much, but still increased. The goal is to decrease. Hopefully, with the lower nutes, the roots or whatever gets diluted enough to slow everything down. They're already not drinking as much. So there's very little time. I wanted to get it corrected by today. But nope. Nothin doin. Well, I guess I'll be checking the pH tomorrow morning and changing the water out. I might have to change it in the morning and after lights out. We shall see. If it drops, I'm going to pH it back to 5.8 and leave the water alone. That's the plan. 12/10/2025 So today I checked the readings like everyday. BUT today my back is killing me and I can't lift the shit. It's really annoying. So frustrating. Anyway, Lemon Cherry Cookies didn't change one bit overnight. pH is still at 6.8. the EC and TDS are also in roughly the same spot. But she did drink about a half a gallon and there was no change, so that's good. No increase in nutrient concentration. But the pH man, the pH is brutal. Papaya Cookies dropped her pH down to 6.6, so that's good. Not in range, but still good. Her EC and TDS are also about the same. So same situation but a lower pH. So I popped 3 ml of pH down in and mixed it up. Half gallon went into each container. It did nothing to Lemon Cherry Cookies. The pH stayed the same. But the EC and TDS dropped a little. Papaya Cookies with the gallon, dropped down to 6.2 and the EC and TDS dropped a little bit as well. Readings: Lemon Cherry Cookies: pH: 6.74 EC: 922 TDS: 465 Papaya Cookies: pH: 6.5 EC: 867 TDS: 430 Forget everything you just read. LMAO. The numbers increased. I guess it's just a waiting game now. I'm gonna pH the water for both ladies after lights out. This morning I just added the plain pHed water. And not much happened. It's the roots. Gotta be. There's nothing left to look at. Well there's the tiny dose of nutes, but I don't think that's the problem. It could also be from the water itself. It's pretty hard. But I have no idea what to do about that. Is there a water softener that can be used in a bucket? Or would that be a really bad idea? Also, I just thought about this yesterday when I was removing Lemon Cherry Cookies from her bucket into the reserve for the water swap. As we all know, the tail of the roots is super long. So I have to lift it with my hands out of the water. My question is why didn't it ball up like Papaya Cookies? I think they have the same amount of roots, but Papaya Cookies has an actual ball where Lemon Cherry Cookies has a tail and smaller root ball. What gives? Anyway, that was my weekly WTF question. Next week it's gonna be something like why won't this carboflush work? Should I add more? Should I swap out the water... Again?... You know. I'm implementing Murphy's Law here. What can go wrong will go wrong. LMAO. It's all good. I'm preparing for that exact question. I bet it's gonna be increasing EC and TDS levels. That's gonna be the problem. And no idea how to solve it. Swap out the water every few hours? That's crazy. Maybe one or two swaps every day, but not every few hours. A waste of carboflush and water. So I'm super concerned with who will finish first. Papaya Cookies looks like she could be done by the end of the week. Lemon Cherry Cookies looks like she could use the whole week and then some. I know I said this last week, but it is a real concern. And I still have nowhere to put the other tent. But it's only for a few days and not an entire week. Well, hopefully not an entire week. I have to trim in the tent so I can kinda keep the smell concealed. The fan on level 10 with just a side door open should be fine. Plus, I'm only taking off the sugar leaves at that point. So it should be a little faster with this brush thing and less smell will escape. Oh, I'll be using Grove Bags for the curing process. I really do like them. But I still need to add a Bovida pack because of the dry winter air. 12/11/2025 Morning readings after correction. Papaya Cookies: pH: 5.95 EC: 763 TDS: 381 Lemon Cherry Cookies: pH: 6.2 EC: 946 TDS: 473 I got a couple trichome videos posted for everyone to see. I actually haven't watched them yet, so I'll update shortly. But in bigger news. I found a full fledged flower on Lemon Cherry Cookies this morning. Complete with 1 seed. Then I found a bud with 3 seeds. Not developed yet, but there nonetheless. So that explains why she's taking longer to finish up. I'm hoping it was isolated and those are the only ones. I looked all through the bottom where I found the 2 sites. I think I found one more, but I left it alone. My question is, if I clear out the seeded sites, will the plant mature faster? Good question right?! Because what I read was that seeded cannabis plants will take longer to mature because of seed production, as seeds take 6 to 8 weeks to mature.i had a gorilla cookies that went for like 21 weeks because it got seeded everywhere. No clue how, I never found the pollen sacks. But that plant was super healthy and HUGE. Well huge for an Autoflower in a 3x3 tent with 3 more plants in there. Anyway, I'll definitely have to bring out the 2x2 now. As I said, I have trichome videos and I haven't seen them yet. But I have a feeling that Papaya Cookies is just about finished. As in I could probably start the flush this weeks as I suspected. We'll see though. Oh speaking of healthy plants. Lemon Cherry Cookies is also still unhealthy. I spoke too soon. Still locked out and now more leaves are turning yellow. The weird thing is, I added a very small amount of nutrients. How there's still an issue I don't know. I guess just wait longer? 🤔 Ok, so I just watched both videos. Lemon Cherry Cookies definitely has more time to go. The trichomes are mostly clear toward the middle of the plant. So she definitely has more time to go. Hopefully with any luck, she'll mature by the end of the week. Papaya Cookies has almost all cloudy trichomes. I like a bit of amber in the mix and there is none. So I'm going to wait for Sunday I think then start flushing her. I'll flush for 3 days. So that will be finished on Tuesday. And that's when I should be able to start flushing Lemon Cherry Cookies. Then I chop Papaya Cookies and hang her up. At the same time, I do a 3 day dark period for Lemon Cherry Cookies while she finishes up. In the meantime, Papaya Cookies is happily drying right above her. I'm still trying to figure out the best way to work the environment. I'm thinking I can just keep the temp at around 66° and bring the humidity up to 50% I think that's good. I have to look into it. But it's only for a few days and there's still plenty of airflow. I will be turning 1 fan off though. As to not disturb Papaya Cookies while she dries. Plus I don't need 2 fans for 1 plant this size. So yah, that's my plan. And as long as it works I'm good to go. If it doesn't work, I'll have to bring out the 2x2 and hook it up to the 3x3 and use that exhaust to pull from the tent. I have an extra fan so I can run that as well. For air circulation. Not too sure how I'm gonna keep the humidity up in there. Hmmmm. That's not good. I can definitely keep the temp low, but the humidity is super dry here right now. Well, it'll be 3 days in the 3x3 drying so if the 3x3 isn't ready for both plants to dry, the 2x2 will only be used for like 7 days. With a 10 day dry, that is. I'd rather not rush the drying time. Although, if I can't figure out the humidity, I may be rushing it quite a bit. Like in a very bad way. So I hurt my back and am having trouble even checking the readings. Hopefully it's not all messed up. Also, I've been thinking. Both plants have nutrient lockout. Would it make sense to start flushing Papaya Cookies like tomorrow? She only has about a week left. 12/12/2025 Readings: Papaya Cookies: pH: 5.5 EC: 731 TDS: 364 Lemon Cherry Cookies: pH: 6.2 EC: 877 TDS: 438

Hello to you all. As a true visionary I decided to go FULL HYDRO this week, that means water in buckets and outside the buckets /s This grow turns out to be an uphill battle but i already decided to bring it to completion no matter what...Icy weather, floods, alien invasions what's coming next a big bank crash?! I'll bring this grow to the end! Who needs banks anyways when you got #coins ;) On 22.02. added nutrients to the 140 liters of solution. That's it, I hope to see y'all next week growmies.

5 day flowering , deleted big leaves

We have officially entered the mutant phase everything is starting to shoot out three pointed mutant branch sites. Days have hit 14 hours should be in full veg just in time to hit another preflower growth spurt come mid July. Trying hard to clear 12 feet. I got 40 pounds cow manure 40 pounds chicken manure and 40 pounds castings in route today. Been green mulching my top layer added some pine needles bio char alfalfa meal and insect frass to my top layer as well as turbo charging my tea brews with nitrogen like blood meal. Ramping up my feedings as my plants and roots establish. Still hitting em weekly with myko fungus. Feeding my brews with blackstrap. Starting to attract moths and grass hoppers hitting regularly with neem and bt which I’m about to ramp up also. 2lbs of nitrogen heavy bat guano is getting added to the topsoil today as well. Added some of photos of my cousins from the original 15 to the mix he doing pots not sure if nutrients sent him a couple year old fox farms bundle I had lying around if he care to use it over all his seem pretty healthy too I haven’t went to see em myself pictures were sent, thinks he’s dealing with some heat stress nice thing about pots is they could be moved I suppose.

Started flush now. I'm adding Nature Delight Active Sugar Boost as it's been recommended to boost terpene production. No idea if it will work this late into flower but trying anyway as apparently it has no need to be flushed and is fully organic.

11/15 Coming along but not without problems. 3+ weeks in now I'm in the stage where I'm just trying to push all the right buttons and guide it to harvest. They've all demonstrated some level stress but bud formation is coming along well. I dont know if I'm just used to the smell but it hasn't really gotten much stronger. I'll try to take some more pics later on. The past week has been a little busy.

🌱✨ Super Sativa Seed Club Week 2 Report! ✨🌱 Hey fellow green thumbs! 🌿 We’ve just wrapped up Week 2 with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. There’s been some amazing progress, and we’re excited to share all the details with you. Let’s get into it! 🌟 Week 2 Progress: Day 8-10: Accelerated Growth Auto Fast Pete: This little speedster continues to impress! The second set of true leaves has developed, and the plant is noticeably taller. The nodes are starting to space out, showing signs of strong vertical growth. 🌿🚀 Auto Northern Dragon Fuel: Catching up quickly, Northern Dragon Fuel is showing robust leaf development. The second set of true leaves is out, and the plant is thickening up nicely. 🌱 Day 11-13: Leaf Expansion & Root Strength Auto Fast Pete: The leaves are broadening and getting darker, indicating healthy chlorophyll production. The root system is well-established, contributing to the plant’s steady growth. 🌱✨ Auto Northern Dragon Fuel: This strain is demonstrating impressive resilience. The leaves are lush and green, and the plant is starting to show its characteristic sturdy structure. 🌿 Day 14: Preparing for Nutrient Boost Auto Fast Pete: By the end of Week 2, Pete is ready for a light nutrient boost. The growth is vigorous, and the plant is looking for more food to fuel its rapid development. Auto Northern Dragon Fuel: Also ready for its first feeding, Northern Dragon Fuel is catching up in height and leaf density. This strain promises a rewarding cultivation journey. 🌱🌟 🌟 Care Tips: Light: We’re keeping our full-spectrum LED light at a steady distance of about 18-24 inches above the canopy to ensure even light distribution. 💡 Watering: Continuing with careful watering practices, ensuring the soil stays moist but not waterlogged. Roots are loving the balance! 🌊 Nutrients: Introducing a mild nutrient solution to support the next phase of growth. A balanced NPK ratio works wonders at this stage. 🌿 Environment: Maintaining optimal temperature (70-75°F) and humidity (55-65%) to keep the plants in their comfort zone. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: Characteristics: Rapid growth with excellent leaf and root development. This strain is a dream for those looking for quick results without compromising quality. Future Expectations: Early signs of flowering might start showing soon, given the rapid pace. Stay tuned for more exciting developments! Auto Northern Dragon Fuel: Characteristics: Steady and strong growth. This strain might take a bit longer to show its full potential, but it’s definitely worth the wait. Future Expectations: Expect significant growth spurts and bushier development in the coming weeks. The promise of larger yields is looking more real by the day. 🌍🌿 Fun Fact: Did you know? 🌿✨ Auto-flowering strains are perfect for multiple harvests in a single growing season. Their quick life cycle means you can enjoy several crops throughout the year! 🎥 Join the Journey on YouTube: For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. Plus, there’s so much more to explore and learn together! 👉 Join me on YouTube 👈 🌟 Conclusion: Week 2 has been fantastic, with both Auto Fast Pete and Auto Northern Dragon Fuel showing great promise. We’re excited for the next stages of growth and can’t wait to share more updates with you all. Stay tuned for Week 3, and happy growing! 🌿💚✨ Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 #SuperSativaSeedClub #GerminationReport #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #Inspire #GrowYourOwn #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #sssc #Week2Report