4 more weeks to go and we are harvesting, and it will assure me that I have properly flushed her, want her to be a smooth operator, her smell as cheesy as always, I am just worried I over did it with the nutrients now with water, but she will guide me.

So since I had the mold and bud rot problems I had to divide my schedule of harvest and divide the product as well. - Healthy buds are ones belonging to branches where there are no signs of rot/mold. -Mid-healthy buds are untouched by disease but still belonging to a branch where there was some disease. -Last category are the salvaged ones, where I cut them from bigger buds that had disease or they were in some part affected. These 3 categories each have their own drying space and where harvested in this order to prevent spreading of spores and stuff. For the salvaged buds every time I removed a part with disease I cleaned the scissors with alcohol. I only removed the sun-leaves + penguin leaves and will be doing a dry trim for the sugar leaves later on.

So since I had the mold and bud rot problems I had to divide my schedule of harvest and divide the product as well. - Healthy buds are ones belonging to branches where there are no signs of rot/mold. -Mid-healthy buds are untouched by disease but still belonging to a branch where there was some disease. -Last category are the salvaged ones, where I cut them from bigger buds that had disease or they were in some part affected. These 3 categories each have their own drying space and where harvested in this order to prevent spreading of spores and stuff. For the salvaged buds every time I removed a part with disease I cleaned the scissors with alcohol. I only removed the sun-leaves + penguin leaves and will be doing a dry trim for the sugar leaves later on.

So since I had the mold and bud rot problems I had to divide my schedule of harvest and divide the product as well. - Healthy buds are ones belonging to branches where there are no signs of rot/mold. -Mid-healthy buds are untouched by disease but still belonging to a branch where there was some disease. -Last category are the salvaged ones, where I cut them from bigger buds that had disease or they were in some part affected. These 3 categories each have their own drying space and where harvested in this order to prevent spreading of spores and stuff. For the salvaged buds every time I removed a part with disease I cleaned the scissors with alcohol. I only removed the sun-leaves + penguin leaves and will be doing a dry trim for the sugar leaves later on.

10th week of flowering: week from 23/10 to 29/10 This is the last week of flowering for this strain. Unfortunately here in north eastern Italy the outdoor climate isn’t so kind in this period. So even If I wanted to let them mature a bit more, the temperature at night goes to 10°C. It hasn’t perfectly matured, but that’s what I have. I noticed some trichomes have lost the head or sphere at the top. I read that’s due to low temperature, so I see myself forced to harvest it now. Also it’s better to get them out the rain since bud rot and mold are still spreading in some branches.

Week 2 of Flower (Day 56 since sprouted) Just maintaining temps and adjusting light distance. Fed with 1/2 gallon of feed water PH 6.5 -TPS CalMag 1 mil -General Hydroponics Trio -TPS Signal 5 mil per 1 gallon Light defoliating

Week 2 of Flower (Day 56 since sprouted) Just maintaining temps and adjusting light distance. Fed with 1/2 gallon of feed water PH 6.5 -TPS CalMag 1 mil -General Hydroponics Trio -TPS Signal 5 mil per 1 gallon Light defoliating

Second week of flowering starts! ☀️01.11.2023 Nearly all is going like it should. 'Nearly', because of lidht signs of magnesium deficiency on the few leafes of one 'Special Queen' plant. I'll try to give them a drop of 'CalMag' before it'll be too late. Therefore, I have a great garden, - it's lovely looking and the budz are forming well. The trichomes developong have started. I'm spraying it with 'Bio Bloom' solution every day. ☀️03.11.2023 Watered two of them today. 'Bio Bloom' spraiyng also. ☀️05.11.2023 'Bio Bloom' spraying only. ☀️07.11.2023 Watering with 50% consentration 'TA Tripart' + 100% 'Bio Bizz CalMag'. Spraying with 'TA Pro Bloom' solution. Week ends.

All 3 plants are looking healthy and occasionally even look happy when I'm not stretching their limbs out all over the place 😒 Not alot of progress on their height but they look like they're doing alright so I'm not gonna worry too much yet, I could really do with these being nice and short so I don't have to mess about raising the shelf up 🙄 That's all for the moment, just watering and moving the branches out, it's nearly flowering time 🎄 Happy growing everyone, take it easy 😎🌿 30th October All 3 plants are doing well and responding nicely to the lst, every day I move a bud site away more and new ones just keep popping up all over the place 🌿 not alot of vertical growth which is fine by me just don't know if that'll negatively impact my yield 😕 but they're more than likely getting ready to shoot up 🌱

This was the last week of veg. I switched from organic nutrients to synthetic. For the pipes of the autopot. I will therefore also flush them for 2 weeks. In the first week of flowering there will be a dehumidifier in the tent to get around 50% humidity

Привет👋🏼 На этой неделе все нормально, кроме того что при поливе на выходе у меня показывает ph ниже, а ppm выше чем на входе.

Started using chelated micronutrients, calcium sulfate, and Drip Hydros Base B to push the plants even harder. Everything mixed together nicely with no nutes crashing out.

Buds should be dried in the dark at 21 degrees, 50% humidity

Spray evolution one's a week

I have to dry the buds in the dark at 20 degrees with 50% humidity

Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.

Plant was transplanted in to 5.5 L pot.