@twenty20mendocino A-Team R&D Update ~ Let’s Go day 24 of flower 🌸 an we are looking amazing! Ladies are starting to stack an oh my we getting a lot of frost going on! starting to get some gassy stanky notes of em too😍 ! We are only into week 4 ladies an gents we still got a few weeks to go of stacking! Keep your eyes peeled for next week’s update yall , peace love a positive to all y’all , an have an amazing productive day ! Cheers an blaze on !!

Quarta settimana di fioritura 😉🤔💪🦍

I have not been at home too much this week so theres not too many photos but im flushing right now just counting down the days to chop this plant down! I have a problem with foxtails due to my tent not being high enough to raise the lights but thats fine.... ill get a new tent pretty soon ( This is my first Indoor grow! thats why im still learning about lights and all that.. I used to grow outdoors so my indoor and autoflower techniques still in baby steps

Fastest Flowering I have ever seen, some magic, quickly moved to Ripening

Day 84 - June 25 June 25 - 09.30AM Trichomes still not ready at 50/50 milky to cloudy. Soil is still moist. Will water either late this evening or tomorrow morning. I suspect this will be the second or last watering before chop. June 25 - 09.00PM Removed a dead leaf - I want to remove some of the dying leaves on the colas, as underside of plant has a beautiful purple hue to the leaves. June 26 - 08.45AM Trichomes are starting to turn milky, with 60/40 milky to cloudy ratio. Will water this evening as pot is getting lighter + soil isn't as moist. June 26 - 01.20PM Purple is here. I think it's time to chop tomorrow as I'm seeing more ambers. I'm noticing some bright green growth which I hope isn't the start of nanners. June 26 - 01.20PM Watered 3L. Chop tomorrow. June 27 - 00.00AM CHOPPED (Day 86). . June 27 - 00.00AM Inspected detached calyx with strange (I suspect pistil) growth. Many amber trichomes found. Strange, given colas I inspected were all cloudy with no amber, but this calyx (located at centre of plant) had plenty of amber trichomes. Perhaps this is due to recieving a higher than expected DLI at hotspot of light. . June 27 - 00.00AM Underside of Buds are underdeveloped in comparison - easily due to light blockage. I aimed not to defoliate as she entered flower, but perhaps with better LST and leaf tucking I could've produced more even yield. . June 27 - 00.00AM Trimmed Fan leaves and mostly necrotic foliage - want to avoid bud-rot at all costs, but I may have over-defoliated. . June 27 - 00.00AM Drying hanging upside down with oscilating fan above (2/10) and one beneath driving air toward a wall of the tent. There's also an extraction fan at the top of the tent. . June 27 - 00.00AM Humidity 60-62% & Temperature 64-66F. . June 27 - 02.45PM Temperature is rising in the tent to 69F, inside a sealed bathroom room. Sealed Bathroom offers no light leakage, but I might need to open the door and allow light + cool air in. . June 27 - 03.45PM Moved tent out of bathroom to get cooler air. Tent temperature was just under 70F. I've likely lost some flavour over a few hours - but now that it's in a cooler environment (with slight light leakage) - things should improve. . June 27 - 03.45PM Temperature & Humidity are 66F and 60% respectively. . June 27 - 04.00PM (16 hours since chop) . June 27 - 04.05PM Added portable cooling unit to intake, this should drop temperature by a degree or two hopefully. Ensured Fans weren't directly in path of buds. . June 27 - 04.30PM Humidity is 66%, I've increased oscilating fan speed to 5/10 to combat this. . June 27 - 08.50PM Humidity is 60%. Temperature is 66F . July 1 - 09.00PM Branches still bend - not snap. Will trim and start cure process tomorrow. Leaves shrivelled up. . July 2 - 10.00AM Rough Trim, and placed into cure jars. 58% RH and 60% RH Probably should have harvested last night. Will maintain RH in jars via burping. Roughly 2oz (56g) of bud harvested.

Mother: to the older sets that are in pot Gonna transplant dem new mother by the end of the week or next week...jus letting LST do it thing since I already started it New cutting first visible root in 8 day off of water only gonna hit them with a rooting mixture before end of week

Gracias al equipo de Divine Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁Fractal: La semilla de marihuana Fractal es una cepa especialmente psicodélica que Semillas Divinas desarrolló para experiencias esotéricas y místicas, meditación y creatividad. La potente y vívida Skunk#1 fue cruzada con una pegajosa Afghani Indica, y el resultado es ahora conocido como Fractal. Este exótico híbrido es resinoso, picante y productivo. La mejor opción para el cultivo comercial: un compromiso entre mayores rendimientos y maduración rápida. En interiores se espera una altura de 1,70 m, en exteriores las plantas crecen hasta 2 m. Fractal se adapta a todo tipo de entorno de cultivo: cajas de cultivo, instalaciones hidropónicas o aeropónicas, plantaciones exteriores, balcones, terrazas e invernaderos. Para un mejor rendimiento se recomienda entrenar a las plantas de Fractal para ampliar su estructura y limitar su crecimiento vertical. Usar ScroG o SoG, LST, FIM o topping. Fractal tiene una inmunidad inherente al moho y a las plagas de insectos, pero como sus colas son gruesas, proteja sus plantas del aire viciado. También durante las semanas de lluvia su plantación puede necesitar ser cubierta. Listo para la cosecha al aire libre en octubre. Grandes y densos cogollos. Los cogollos de marihuana de la variedad Fractral huelen a hachís y algo a tierra, desprenden cedro y notas afrutadas al romperse. Mida su porción con cuidado: su potencia está por encima de la media. Con Fractal experimentas un apedreamiento general que te hace sentarte o frena tu movimiento. Perfecto para pasar una noche junto a una hoguera. Es mejor consumirlo por la noche. 🚀🌻 Consigue aquí tus semillas: https://divineseeds.net/es/fractal-fem/ 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 7: Buena semana, los cogollos están engordando que da gusto, las plantas estan totalmente cargadas de resina hasta en algunas hojas exteriores. Se comen todos los nutrientes que da gusto, comienzan a mostrar alguna carencia en la parte inferior de la planta lo que es una buena señal. Continuo con las dosis de nutrientes recomendadas por el vendedor.

Starting to slow down their feed , they are drinking much slower then before and in a few days I’ll do a quick flush fully watering the pots till water comes out the bottom and another 500ml of magnesium sulphate so that I have something back into the substrate right away to prevent any lost they might suffer from an under feed in these crucial periods

The plants were so crowded I decided to put them into a Larger tent to allow some light to the lower bud sites and to help lower the humidity amongst the plants. I'm sure they will love the extra space. The light has now been raised 20cm (20cm taller tent) Allowing me to turn out right up which is 45000 lux in the centre right below it. I will up the bloom to 2ml/l this coming week.

Let’s Go Day 22 from seed for these 5 Ogreberry Autos from @twenty20mendocino and Bruce Banner from @fastbudsgenetics !! Today we turned the Scorpion up to full power and raised it to 38 1/2 inches above pots and getting a reading of 520 - 530 par ! gonna let the babies grow into the light now over the next few weeks till they hit into flower an keep a steady eye on it Incase I got to raise the light higher or lower !! Air temp an humidity has been great , stayin from 70-75 degrees through the day an humidity is staying around 58% ! So far so good Let’s grow lil Babies let’s grow!!! Hope you all enjoy an are ready for another amazing week ! Peace love an positive vibes to all you Growmies out there Cheers 😶‍🌫️💨💨💨💨💨🤙🏻keep them eyes peeled for next week y’all !! If there’s any questions please ask me ! Thank you all. 💚💯

Focusing on filling out Scrog this week. Did a good deal of defoliation yesterday to try and eliminate overlapping foliage as well as get light to lower sites. Discovered I haven't been shaking nutes up enough before using so actual nutes amounts before this week are 🤷. Giving the girls a day or two to recover but will likely defoliate a little more at next feeding.

Harvest done, I believe the result would be better if it hadn't suffered so much. But it's within expectations, let's see how it turns out after the drying and curing process..

Day 42, start of flowering week 3: they are growing nicely, had to do a lot of defoliation on each plant, except the one in the 3L pot. Day 43, I started to discover that the roots are coming out aggressively from the bottom of the pot. I did not move the ones in the back, but I guess same thing. The one in the 3L pot doesn't have this problem. Day 45: getting really excited for these guys! I'm trying to keep the temp and humidity low, and I hope I can achieve some of the purple color :P any advice on that? day46: defoliaton

This week was another week of keeping up her food intake,,and well hydrated ,,every branch is filling top to bottom so she’s still screaming for more food and plenty of h20,,,,, The old saying,,, what you put in ,,you get out,,so all the defoliation and training for this girl to fit Snugly in her 2x2,,has definitely paid off,,, Great Genetics by 420 Fastbuds,,👌🙏👍👍👍👍👍💚💚💚💚💚💚💚

04.08. Runtz# Day 64# Day Flowering 47# The plants are nearing the end, 5 days ago I started to give them a "flawless finish" and if some people needed another 2+ weeks at that point according to what the microscope says, the leaves and the very form of the flowers, but the humidity is high, the rains are frequent lately and the conditions for mold are ideal, so I will not risk it and they are this small, and the caterpillars have also started to be annoying... However, the situation has changed... half of the plants were almost at full strength, but with the fact that a week ago I gave it overdrive because I planned to give it another two weeks and then give it only clean water for a week or two, it prolonged their flowering, that's what I concluded, a bunch of new transparent trichomes appeared on the flowers and now they need two more weeks at the moment, and I already started with "flawless finish" 4-5 days ago, but well, I'll continue like that when when they are ripe, I pick them unless mold appears or caterpillars attack... 3 or 4 plants will be through a week to a maximum of 10 days ripe (the way I like it) for picking, the rest in two weeks (as I said before, if no caterpillars or mold attack)… Yesterday was the end of their ninth week. Rutnz 1# picture no. 29# harvested,trimmed and left to dry on 31.07. it is still drying. This dwarf had only one big bud along the whole plant, and I expected something like this, especially because it was in grass that is bigger than it, and the humidity has been really high lately... mostly, the mold started and some spiders also ruined it a lot, I must have thrown away a third of the flowers... I had to cut the plant into heads so that I could see all the infected ones and remove them. Runtz 2# picture no.30# and these two videos Harvester,trimmed and left to dry 02.08. This plant also started to mold, the whole two heads that were below, immediately up to the main bud, they started to mold (the empty space between the main head and the lower heads where the stem can be seen), and later, after picking, I inspected the plant in more detail and found something else small all the way down... everything that was even a little bit infected was removed (if a head was slightly infected, the whole head was removed, not just the infected part) I lost a bit here less than a quarter of the flowers, approx. Stay High and Keep Growing!!!