Likes
Comments
Share
@Crwfz1
Follow
She’s done. That’s it for This Bruce banner original sensible always is on point this plant is gorgeous and so stinky has flowery diesel notes and tons of tricomes can’t wait to get this dried looking about 3 oz dry I would assume from my experience on to the next ones now !
Likes
15
Share
Hi zusammen, das Wetter spielte die letzten Wochen leider nicht so mit und das betrifft auch den Wachstum von #2. Sie hinkt sehr hinterher und bildet nur Mini Buds. Es fehlt einfach an Licht und auch die hohe Luftfeuchtigkeit macht ihr zu schaffen. Im Zelt sieht das ganz anders aus: Zwar ist auch hier die Luftfeuchtigkeit relativ hoch mit im Schnitt 65% diese Woche, aber die Entwicklung zu letzter Woche ist erstaunlich. Hoffe, dass ich in späteren Wochen kein Problem mit Schimmel bekomme. Ansonsten sehr schöne Blütenbildung und Wachstum, die Trichome erkennt man mit bloßem Auge sehr gut. Den Dünger hab ich gut angepasst und noch mal ordentlich was draufgepackt. Gießen muss ich so etwa jeden 1 1/2 Tag mit knapp 3 L pro Pflanze, die draußen bekommt etwa 3 L jeden zweiten Tag. Bin gespannt, ob sich bei #2 noch mal was tut, ansonsten wird’s ne schöne Garten Deko 😅 Wünsche euch ein schönes Wochenende und stay high 🏻🍀 Gruß Wulle
Likes
11
Share
Eccoci qui... Per problemi di lavoro ho tardato un pò la pubblicazione delle foto, la piccola è molto vigora ed emana un forte odore.. Già si può vedere la resina che si inizia a formare sulle cime in alto... Sono estremamente soddisfatto della sua crescita finora e idealmente credo che sia la piccola che avrà più resa alla fine.. Grazie a tutti per il supporto, NON VEDO L'ORA DI RACCOGLIERLA 🔥🌲❤️
Likes
103
Share
@SwissKush
Follow
Day 50 - growing well a. what an interesting plant! she is small, but mighty! b. I think we are going to have some flowers soon, still hard to tell c. she should stretch up a bit this week, the stem is so thick on this plant d. this has been so interesting grow! These buds will be HUGE! e. added in GH Bloom (Pro Bloom) with this mornings 1.5L feed Day 51 - growing very well a. she is drinking so much water, the same amounts as if she was a monster b. per advice of fellow growers I will not be blowing the ppms out of the water like normal for this plant (but I might anyway, hehe) c. i can see the future flower sites forming Day 52 - growth explosion overnight a. she is drinking alot of water right now! b. I hope this plant goes for 120 days! Day 53 - tops are emerging a. she has about 10 tops that are emerging from the shrub b. the smell is so strong c. removed the CO2 generator as flowering is beginning d. i will remove about 10 big fan leaves today, they are not getting any light, and are crowding up the airflow Day 54 - wow! a. she is growing very well! b. i lowered the LED to 40cm, at 100% intensity, the tops are begging for light! c. we are going to have some big buds for sure! d. removing those large old fan leaves really proved to cause her to explode in growth Day 55 - she is really reaching! a. everything is going well with the she hulk, she is really hulking out everywhere b. she looks like she is begging for more nutrients, so I may just say fuck it and blast her to the moon with nutes! Day 56 - she is eating everything I put into the DWC a. the nutrient intake has become really high, the ppms are dropping so hard b. keeping the PH at 6.5, she is growing like a monster
Likes
5
Share
Haven't been remembering to post weekly updates! Everything is going great the auto flower girls are budding nicely and the other ladies are starting to flower nicely I'm giving alternating nutrients using a few different fox farm nutrient feed charts with my own take on them from notes an suggestions. This is the part that is so enjoyable but so stressful!
Likes
74
Share
@AsNoriu
Follow
Day 50. Was insane busy, so weak updates ... Next week will be most of plants shown in separate photos. Girls are happy, I am not ;))) some are almost at harvest and one still haven't started to flower ... Happy Growing !!!
Likes
Comments
Share
This plant was a show-er for sure! The plants sprung up from the very beginning with huge leaves and thick colas! Nice purple hues and dense nugs! Would definitely grow again!
Likes
14
Share
@BB_UK
Follow
Been a working week! Defoliated twice! First I did lower fan leaves, waited a few days and snipped the Rest to allow light to reach all news growth! Dynomyco is a banger it’s got these girls so sturdy! Just look at the stems and how much growth I have already and this is just day 28 in veg! A lot more to come! I can’t wait! Still continuing with foliar sprays a few times a day!
Processing
Likes
15
Share
Esa familia, nuestras crazy cookies están algo sobre fertilizadas y por ello le practicamos un lavado de raíces para eliminar los nutrientes sobrantes. Ph controlado unos días sin regar la próxima semana y veremos que tal avanzan , floración lenta imagino que por culpa de la sobrefertilización aunque tiene solución fumetillas.
Likes
29
Share
@Omisan
Follow
OOOOOH at this time i love all of you, growmie 😍 200gr of pure happiness, never before! 🙌 Buds are compact like rock, shine like diamond...it's unbelivable, looks perfect! At last, mold take me about 20g of buds 😩 But it is ok, the jar is overfull and i'm so happy XD Now let's wait for the right taste......for now is greatful! 😜 Thanks to Dutch Passion for this opportunity, i'm really proud!! 🙏 Thanks to all of you growmie, for your support 🙏 to the next adventure!
Likes
10
Share
I topped this girl last week. Her leaf colors are odd tho. Just plain ol water going on this girl.
Likes
15
Share
@Waveform
Follow
Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.
Likes
393
Share
@FoTwenny
Follow
Video from Day 53 I edited and uploaded. I spent a lot of time in the garden yesterday. My veg tent needed a TON of trim work and had to get the girls watered. Picked up some Mammoth P and decided to try it out. The label states you can run through flush and read reports of growers who run through flush. Just microbes, and I have stopped all other microbes and just flushing with sledgehammer. I will be back in the garden today and update this week with some more photos! Stay tuned and happy growing! Day 54: I planned to get more photos, but got really tied up with trimming some larf I hadn't noticed in the center of a few plants. I think I was a little to conservative with lollipopping in some areas and left too many lower sites in the middle of the plants. This is the first time I have trained plants in this manner. I had also planned on harvesting the Triple Cheese, but I checked trichomes again and decided to give at least a few more days. That being said, I just took some pre-harvest photos of the Triple Cheese. As I prep each for harvest, I will get some good photos of each plant with the black backdrop. Thanks for stopping by my garden! Peace, love, and happy growing!
Likes
5
Share
@Fefa128
Follow
AAAnd there you have it. A nice experience, my second time making seeds! I harvested the first day of week 15. A lot to say about this experiment. It came out awesome, lots of seeds (more than 100!) Wich I also tested and came out with the exact same phenotype. I added some more pictures of the outcome and of the seeds, cause I don't have much more data about the harvest! Sorry for the last time haha! Also! Leave a comment if you want to see more old diaries, I might have 4 or so documented like this, Including the first test of the seeds Wich you see some pics here 🤞.
Likes
12
Share
This plant has been pretty easy. No real problems throughout entire grow. Now waiting to cure for 4 weeks before i try it out.
Likes
40
Share
It was an easy harvest as the colas developed nicely. Hardly any popcorn nugs and very little sugar leaves. If the weather had allowed it, I think she could have grown even bigger, but I'm more than happy with the outcome!
Likes
8
Share
It's really hard to get started with conditions and insufficient knowledge. but i did it. OG Kush really hard to grow, but it's really worth. ill grow this girl again I added more pictures of Super silver haze, she's baby and only 3 weeks to veg. Just showing
Likes
4
Share
Всем привет 🤝 Замочил орешек в бутилированной воде на 16 часов , затем высадил в торфяной куб ! Утром показались листья 🍁
Likes
22
Share
CBD likely coming down before the next week update and gelato shows no signs of slowing down the stacking.
Likes
29
Share
Now they are a bit bigger , this is the start of week 2 , now day 19 in real time from germination. I would appreciate any help to maximise the yield. I feed around 500-600 ppm. How much should the drain be ? I have to plants struggling, one had 500 run off , should I give nutes or flush them more ?