Likes
Comments
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.
Likes
42
Share
Day 14 VEG: A good week of settling in and heading outwards to the pots edges this week. No stress , just a nice, relaxed , adjusting to the world they will inhabit for the next 10 weeks or so. They are nearly all on their 5th nodes now so will possibly begin to play with the 5th growth nodes this week to break the apical dominance ( focus of energy on the main stem and bud) . I do like how neat and tidy autos can grow naturally but they can also get leggy and waste a lot of grow room vertical space that is always at a premium for me in my cramped , awkward space. I plan to now use 3 different methods on the Amnesia haze to compare side-by-side as we grow. Will hopefully answer some questions about the methods and which produces better results. One will be topped , one f.i.mmed and the last one trained over horizontal at the 5th node but uncut. The last method is better suited to a wider pot than the ones I am using but will be worth a try !. They are currently happy and healthy with no signs of any genetic issues but the #2 is in a more compacted soil which has resulted in an odd rectangular shape to her overall footprint. Her middle leaf points are retarded on all of her fan leaves so far and it will be interesting to see how she progresses too. The Girl scout cookies are also nice and healthy looking so far with no concerns at all. I plan to defoliation one of these ladies at intervals and stripped her right back during flowering while the other one is kept intact with a light defol as it grows to avoid light blocking only. Again this could answer a few queries regarding autoflowers and defoliation for a few of us. I hope to make this an interesting and informative run and welcome any comments , advice/questions or general chatter as we go along. ANY SPONSORS WITH TOO MUCH MERCH OR STUFF TO TEST , I AM GAME LOL. Just saying...... Until next time growmies. Be well UPDATE DAY 15 LST. today I started working with the ladies and completed the planned methods for them #1 Amnesia haze had the F.I.M which inhopenworks ( irony at it's best!!). I chose topping of Amnesia haze #2 as she looks like her nodes will be quite far apart compared to the other 2 and her lower growth was nowhere near as bushy as her 2 sisters either. This topping should stop her pushing the height of the lights up for her lankinness. #3 is going to be pulled over on her 5th node once it is long enough to pin down to 90° . Girl scout cookies have been cleaned of their 1st and 2nd nodes so i can focus the attention on the 5 remaining mains as they grow out more.. watch this space.lol .
Likes
11
Share
Bewässerung: 500 ml jeden 3 Tag in der Sechsten Woche pH-Wert: 5,8 EC-Wert: 0,4 mS/cm Temperatur: 30ºC Luftfeuchtigkeit: 50% Schädlingsbekämpfung: im Moment haben wir keine Anzeichen von befall wir haben nur mal zur Prävention etwas Sand gegen die Schnecken um die Pflanze gemacht, dies verhindert das diese sich nähern. Wir haben aber auch Raubmilben ins spiel gebracht zur vorsorge gegen Spinnmilben und andere Schädlinge 😌 PPFD: Direktes Sonnenlicht DLI: Direktes Sonnenlicht -Tag 31 beide haben die Verpflanzung in die Erde überlebt 😍 und die Bubatz #3 macht sich auch sehr gut, diese wird weiter mit LST Trainiert. -Tag 32 sie wachsen auch so langsam in die höhe und haben beide heute wieder Wasser bekommen.
Likes
16
Share
Mind-expanding and pleasure-inducing, Hypno Seeds presents its autoflowering version of the famous Amnesia Haze, Hazenberg AM Auto. For lovers of Sativa, this quick-growing autoflower cannabis strain will definitely be a big hit. With its incredible earthy flavors and delightfully euphoric effects, like a cannabis mantra, this strain will have you saying its name over and over again. Tech Specs THC 16%-21% CBD 0.40% Flavor Cinnamon, Lime Tree, Patchouli, Sandalwood, Walnut Type 25% Indica / 75% Sativa Flowering 8-9 Weeks From Germination Height 70-130 Cm Effect Corporal, Energy, Extra Sensual, Happy, Sociable Genetics Amnesia Haze X Autoflowering --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Processing
Likes
8
Share
@Order_66
Follow
Hay good week the flowers have started to bulk up a bit .I've stopped the take root and started a low dose of explode . I've been taking a few more leaves an I've tied down a couple of branches to let the light get in . Lots of tricomes some frosty leaves and getting sticky and smelly .
Likes
4
Share
It’s been a long day potting these girls into there new home. All is looking well. Little bit of heat stress but ime sure they will cope 🤞
Likes
86
Share
@CANNASIM
Follow
------GENERAL COMMENT------ Girls are moving forward without troubles, i'm pleased not having to deal with issues. I'm breaking down the feeding schedule like: Sensi Base + Bigbud*(or pk booster) + Recharge > VeloKelp+Natures Candy+Bigbud*. So there is constant feed, every other day mixed in 1.5l water. Once a week i give Cal Mag 2ml /l. Not touching the girls with any HST or stress since I switched to flower. Is the first time i'm running recharge from the beginning to the end, have to say that is solid. ------GG.AK47 COMMENT------ What a pleasure to see that many colas and a vibrant girl giving fruits! 😎👊 I'm very curious to see the results in this one, solid strain! Aroma is gasy and diesel like.
Likes
5
Share
@Weedseed
Follow
Estoy muy contento, con estas geneticas de fastbuds, e tenido que lavar las raices ya y esperar a que se seque la arena, aun que me hubiera gustado dejarlas mas tiempo, para que engorden las flores, pero me mudo de casa.. Lo proximo que vereis es cuando las valla a cortar
Likes
61
Share
AFTER TWENTY LONG YEARS HAPPENED TO TURN GRASS FROM THE AGE OF 15 YEARS, IN JANUARY OF THIS YEAR I FOUND IN THE EXPERIENCE I DREAMED TO DO FROM A LIFE ... (AND BELIEVE ... EXPERIENCES I HAVE MADE MANY). BUT THIS AND ALWAYS HAS BEEN THE DREAM OF A WHOLE LIFE AS A DISTINCT CONSUMER OF CANNABIS. I WAS DREAMED IN MY DRAWING TO CULTIVATE AND SMOKE THE GRASS MADE BY ME FROM A YOUNG MAN ... AND NOW THAT I HAVE REALIZED THIS MAGNIFICENT EXPERIENCE I WANTED TO SHARE IT WITH YOU ALL OF THE COMMUNITY THAT IN PART YOU HAVE BEEN MY MENTORS MANY TIMES I TRIED TO PLANT THE SEED OF HAPPINESS BUT FOR A PROBLEM OR ANOTHER I HAD TO THROW EVERYTHING .... WELL ... NOW DEAR FRIENDS ... I KNOW WHAT I HAVE LOST FOREVER. THIS TIME I HAVE INVESTED MONEY ... I HAVE PUT ALL THE DEDICATION AND A FUCKING PATIENCE THAT I HAVE NEVER BEEN GOOD TO HAVE ... it's THERE I MADE IT !!!
Likes
20
Share
@Chubbs
Follow
Weekly update: Crazy how time flies when your having fun. Seems like yesterday I did last week's update. I did some defoliating and lollipoping on them this week and switched from grow nutes to bloom. Wild how fast the preflower sites grow as it looks like they're everywhere. I'm still feeding 16oz per day, some are drinking more then others but overall Happy Growing.
Likes
56
Share
Week 10 done and dusted and I think she is getting closer.... she absolutely stinks so I'm staying out of the tent as much as I can so the pictures are getting less.... No problems to report everything seems to be going just as it should be. 1 question though is from the pics and videos I've posted when would you guys start the 2 week flush? Thanks for popping by people and happy growing 😊
Likes
91
Share
@Salokin
Follow
Gu Guys, she is continuing to develop as she should, however doesn't seem to be stretching all to much even with lower light intensities. I have therefore decided to push the ppfd to roughly 600 and let her finish her pre flower, no matter if she will fill the entire scrog or not. the roots are bit stained, however, this seems to be nutrient related, no slime or smelly roots thus far and it seems like she is constantly shooting out new ones from the net pot. She is going to be a nice little bonsai bush :)
Likes
1
Share
@gse314
Follow
Good progress and defiency maintained
Likes
9
Share
@Unnamed
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
4
Share
@dfgh95
Follow
I watered them with 250ml and 400uS/cm each. I use the photone app to meassure the luminosity and they are receiving 7000lux aprox. They are all doing well. Although Juana has grown more than de others, they all look pretty happy so far. I plan to increase the light intensity at the end of this week since they won´t be babies anymore sooner than later. Today 22 is second week last day and they are starting to grow noticeably each day. This week I raised the EC to 400uS/cm and watered the plants with 250ml, so I just had to water them again with plain ph balanced water one more time during the week and that was practically it with watering. I also raised luminosity by switching 2 more LED bulbs and getting them all closer to the canopi, about 50cm. that is about 10000 lux in the meter I still spray them all day with ph balanced water, maybe next week I'll spray them with a little bit of Algafort, that can be used in foliar spraying. Humidity stayed at +-58% the last 2 days even with the little humidifier and me spraying them all day. I'm trying to raise RHs so next week I'm planning to lower de temp to 22-23 °C hoping humidity raises more naturally. Next week we also will start with a little of CO2 that is always well recieved.