esta semana es su última semana de crecimiento a 18/06h. Por lo que parece las plantas después de la última poda dejaron de crecer a lo alto tal como lo venian haciendo y se han dedicado más a crecer a lo ancho tal como queriamos. A mitad de semana a los 31 dias volví a podar algunas hojas de la parte superior del tallo que ya habian crecido lo suficiente. De esta manera miro de seguir retardando el crecimiento del apical y reforzar el resto de ramas. Y me deshice también del primer par de nudos de todas las plantas. también se ha seguido con el tratamiento con solabiol como preventivo , Dia 33 se quitaron los calefactores porque ya estan subiendo las temperaturas en el exterior y se añadió un par de ventiladores laterales. Aprobeché también para poner los tutores antes de que crezcan mucho más y así dejarlo preparado para la floración. Dia 34, un dia antes de final de semana cambio de fotoperiodo a 12/12h. El tamaño de las plantas y los 9 dias que llevan en estas macetas me parecieron suficientes y es que el armario es pequeñito y no puedo abusar.

Día 27 (12/02) Sigo con los ajustes de LST, pero voy a empezar a dejar que la planta se empiece a estirar Día 28 (13/02) Hago una ligera defoliación (2 hojas por planta) para mejorar la luz sobre las ramas laterales que están creciendo verticalmente Día 30 (15/02). Riego 1 Litro H20 + Wholly Base 1,5 ml/l + Solid Green 1 ml/l + Rise Up 1,25 ml/l de Gen1:11 TDS 880 PPMs - pH 6,6 (ajuste con pH+ para subirlo desde 6,2 y buscar mejor biodisponibilidad del Calcio) DÍA 32 (17/02) Ajustes de LST. La planta no para de crecer 😍 Mañana pasamos a 12/12 y que empiece el proceso de floración! 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae ️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Plants still looking good from last week, the yellowing has seemed to stop spreading, still some dull green in some leaves, I think I was under feeding them, but runoff says otherwise. Noticed some more pink/purple stems on the plants and decided to increase the phosphorus content in the feed by mixing in half grow and half bloom from the nutrient lineup. I'd use the PK booster I have but its to high in K for my liking. The entire lineup is very high in K. mixing grow and bloom gives a NPK ratio of 7-7-14 then done 1:1 equal parts. Grow=8-4-15 Bloom=6-10-14 Boost=1-15-30 Run off was a bit high for my liking but only seeing minimal signs of nutrient burn. Still watering once with feed and runoff and then later in the week with water and no/little runoff for my watering cycle.The number in the nutrient section are wrong but the EC and ratio are correct. Also impressed the roots have started popping out the bottom of the container already after only being transplanted for a week. Good root growth on these ones. Lights doing well. The V1 spectrum is good on the medic grow mini sun-2's 240w. No issues so far, dimmed at 80% . Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.emeraldtriangleseeds.co.uk/ Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/OriginalETS/ Twitter: https://twitter.com/medicgrow + https://twitter.com/emeraldseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/emeraldtriangleseeds/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/emeraldtriangleseeds https://growdiaries.com/seedbank/emerald-triangle-seeds

It grew quick it's an early bloomer. The green buzz were great I kept the ppm lower than I typically do staying around 950 for the crop and 880 for this one. If you like the purple autos this is a good one to start with.

white runtz seems to be holding its own in the center of the tent, really impressed with how well it has responded in flower after such a difficult veg phase

Seedlings are all doing really well, even under this summer heat, but not much I can do about that but seedlings are OK with 30 degrees of heat 👍🏾

Another first timer…I am satisfied with her progress thus far. I'd probably turn her Inna project by crossing with the Skunk #1 pollen. Time will tell..

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.

D27 den Haupt trieb habe ich gestresst zum zweiten Mal. D 28 Die PurplePunch hat etwas Dünger bekommen aber nicht die QuickOne D 29 ich habe den Haupt trieb mit Kabel Binder zusammen gezogen (weniger Licht). D 30 + Café Satz 35g (feucht), Bat guano 40g, wurm Humus 40g, Mehl wurm Humus 20g, Hühner guano 25g, Gestein Mehl 15g, Bacteria 0,5g

• Sugar Puss, Exotic Genetix • Cheetahs piss x Bazers (unreleased) • 60 - 70 day flowering time • Unknown Info nothing online Nutrients • GreenBuzzNutrients (DISCOUNT CODE • GD42025 ) %25 I use the whole product range and this stuff is a game changer. I've not had one bad grow with this company and it hasn't let me down once. Terps and taste are through the roof. No need for run off in coco only during flush week. Hands down the best nutrients on the market. GREENBUZZ OUR NOW OFFEEING OUR FELLOW GROWERS A WHOOPING %25 OFF WHEN USING MY CODE ABOVE. BE AWARE IT HAS CHANGED 🌱💚 ENJOY LIGHT/TENT • Mars Hydro FC-E6500 5x5 tent Insanely frosty! Coated! And it f**king stinks of petrol ⛽️ .. only downside is the bud sizes. Temps Lowered.. resin time. Thanks for all your kind messages about my dad 💚

Heading into week 6 this will be the last week of veg, i will take some Clones and defoliate in the next 2 days give the ladies 4 more days of Regeneration And Send them into 12/12 cyclus They Look Amazing already the zake ist the Most bushy one and the pink Runtz already have a Crazy Sweet smell Breakpadbreath has most side branches and i like the structure the Most

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Some leaf tip burn, either lights or nutes. Measured TDS@900 and moved the lights away a few cm.

Screenshot😩🔝

Missed a week busy. Topped x4,put sgrog net in.🤞🏴󠁧󠁢󠁷󠁬󠁳󠁿🍁 🍁🍁🍁 Light-Voost VST 120 https://voost.com/ 🍁🍁🍁 Breeder-mystery photoperiod 🍁🍁🍁

Really loved this. Nothing more to say for now lol, it's been my first grow and grew her with 2 wild dwarfs and loved both, would grow them again. Really excited to try it out.

Tag3: Heute war das Wetter zum ersten Mal seit einer Woche mal wieder regenfrei. Ich habe eine paar Fotos gemacht. Und um wenigstens irgendwas aus diesem Jahr zu ernten habe ich dann die dicksten Blüten geerntet. Ja zu früh, aber ging nicht anders… was für ein mieser Juli…. Euch schwimmen auch die Felle davon? Lasst gerne etwas Gejammer in den Kommentaren…

Girls are doing well they are due a cut which will be sometime soon.. G4 is massive the main colar is eye level to me and about 5 nodes down from that are over my

Day 51 20/08/24 Tuesday Feed today using de-chlorinated tap water pH 6. With Plagron PK13-14 and power buds. Noticing the stretch stop, and now packing out there bud sites 💪💚 Day 54 23/08/24 Friday Watering only today using de-chlorinated tap water pH 6, I'm watering in 350ml no run off. 400ml I'm seeing tiny run off. Day 56 25/08/24 Sunday Water today using de-chlorinated tap water pH 6. Added bud candy and rhino skin 1ml per litre.