The Grow Awards 2026 🏆
Likes
Comments
Share
Really started to show flowers this week. took her out of the tent for a clean of the tent. feeding with biobizz bloom, topmax and grow.
Likes
16
Share
@Naujas
Follow
107 days!! Here is another great experience :) The girl has matured, 330 grams of wet, full of sticky, resinous shiny, pleasantly smelling flowers :) I think it will be about 90 dry :) although the girl is definitely not the biggest, but she looks great, the smell is also amazing :) I also got some sugar leaves from which I will make bubble hash, For me personally it is really beautiful and good growth, which I think will definitely be confirmed by the dried and cured flowers :) there will be a smoke review, as well as the total dry weight. good luck to everyone :).
Likes
125
Share
@Regenwurm
Follow
Diese Woche ist eine kurze Woche. Die Damen werden jetzt aufgrund ihrer Größe in die Blüte geschickt. Tage der Wachstumsphase = 32 Tage. Größe beim Start Blütephase= 24 cm Mehr gibt es in diesen paar Tagen nicht zu sagen Lichtstärke: 50% Lichtabstand: 40 cm Std Tag/Nacht: 18/6 Temperatur Tag: 23-24,5 Grad RLF Tag: 55% Temperatur Nacht: 20-21 grad RLF Nacht: 50 % PH Wert Wasser/Düngelösung: 6,4 EC Wert: 0,15 Ventilator Oszillation: Stufe 1 Befeuchter: aus Entfeuchter: mit Steuerung an Bewässerung: 1* Wasser Controlling: Grow Control Dünger: Greenbuzz Nutrients Licht: Pro Emit Vollspektrum Abluft: EC Carbon Active 750 m3 gesteuert https://greenbuzznutrients.com/de/ Danke an den Sponsor Greenbuzz 25 % Rabatt bei der Nutzung des Codes auf der GB Homepage https://greenbuzzliquids.com/de/shop/ Code: GD42025 Likes 7
Likes
40
Share
Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Don't forget to check out my other current grows! 🗓️ This Week: - Day 52: the end is near - faded out super strong and could handle her how I would like. - Day 53: Trichomes check - looking super good almost all cloudy, a few amber and clear. perfect point to chop - Day 54: this one is finished, let's chop them !! ✂️✂️✂️ - now its time to dry inside the tent at about 60%rh and less than 20°C/68°F trying to get it even lower for the next 10-14 days Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ Wedding CheeseCake by Fast Buds https://2fast4buds.com/seeds/wedding-cheesecake-fast-flowering --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique
Processing
Likes
18
Share
Week 6 of 8 begins! Divine storm 1&2 are looking great, bulking up and smelling delish! DS1 is the bigger of the two pheno's, but I'm still impressed with how DS2 is developing. Thanks for stopping by, tune in next week for another episode of growfessor theatre! 👽🌳💚
Likes
16
Share
@Mospeada
Follow
Starting week six of flower. Conducting a defoliation experiment. It has good controls being a rdwc single strain grow in a 4 x 8. So defoliated half the tent and leaving the other half untouched.
Likes
105
Share
@Natrona
Follow
Frostbanger Plants 1-6 Week 8 May 18– 24 FLOWER 4 Nutrients : GH Micro 25 ml GH Gro 10 ml GH Bloom 30ml CalMag 30 ml Recharge 10ml Green sensation 16.5ml Power buds 7.5 ml 5/17 PH 6.3, PPM 1130, temp 71 1ltr each 5/18 PH 6.67, PPM 935, temp 68.5 1 ltr each 5/20 PH 6.67, PPM 1330, temp 68.5 2 ltr each 5/21 PH 6.66, PPM 984, temp 69 1 ltr each videos & pics 5/17 Defoliation of yellowing leaves, feed, pics As I mentioned last week, I must monitor and control the tent environment manually. For the past month, the humidifier has been an issue putting out way too much humidity; often leaving water in the bottom of the tent. In addition, the temperatures are also out of control. I added an AC last week to keep the temperature below 80. I finally determined the exhaust vent is also broken and has been for some time. AC Infinity does not extend the warranty to the replacement parts. I guess that makes sense since they would be in a state of perpetual free replacements. I bought a new one from Amazon that came with a new controller which is different from the controller 69 currently using. I decided that while it is very inconvenient and inefficient to monitor the tent through the day, I would rather finish this Frostbanger run without introducing a new unknown variable. I will continue using 3 circulating fans, the 4” exhaust vent from my 3x3. I have the AC pushing air in and the exhaust pulling air out. This creates a neutral pressure tent environment-neither positive nor negative. It looks like growth has stopped and plant height has been reached. Now is the time for buds to fatten and frost up. All 6 of them are short remaining less than 3 ft. They range from 15 to 31 inches. #4, 5 &6 are showing some fade, particularly #4. Upon opening the tent, a melon smell comes off the buds if I get close, and more stickiness was observed during the process of defoliation. They are living up to the new strain’s name. #5 is the frostiest followed by #2. Wow week 3 of flower and that much frost already. Before FastBuds announced the strain name and characteristics, I was disappointed that FBA2502 could be an indica sleepy strain but the universe provides what you need at the time. The new strain profile indicates a whopping 29%THC with mainly sativa uplifting, euphoric, social effects with sweet fruity flavors which I love and enjoy. In addition, I recently bought a dap press and this strain is frosty and resinous. She will be great to press for live rosin. FBA2502 is FROSTBANGER. Meet Frostbanger Auto, an autoflowering and Indica-leaning hybrid packing a staggeringly high THC content averaging 29%, making this one of the most potent strains on the market. It was created by Fast Buds through crossbreeding Gorilla Glue and Chemdawg, two equally iconic strains. Growers must know that these difficult-to-grow plants will pose specific challenges in terms of environmental control and nutrition, making them best suited for cultivators with some experience under their belt. The flowering cycle is short, averaging only 50 days, and yields are usually around 300g/m². The Frostbanger Auto flavor and aroma are both mouthwatering with a delightful combination of sweet, fruity, and flowery notes. The high is mainly Sativa-driven with uplifting and happiness-inducing effects that lead to euphoria and a general sense of well-being. You might feel sociable and talkative, but too spacey to say something. Following this surge of energy comes a deepening sense of relaxation, leaving you sedated and completely at ease with the world. Due to its potency and these long-lasting effects, medical patients hail Frostbanger Auto for treating chronic pain, stress, and even depression. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫
Likes
21
Share
@Herbie
Follow
The time has come to pass for this super cool Red poison auto from Sweet seeds. The one bud beauty has been fun from the start. It took as much time trying to figure out what 16oz was in English and then actually find a 473ml cup, as it took this girl to germinate. I've mentioned before it was a picture entry from this this comp previous that drew me to grow diaries in the first place. (Yes I'm a bud slut, don't judge) Back to miss Red P, she has taken the usual beating of me forgetting to water and feed a few days, a neglect that all my plants enjoy at some stage of their lives. She started life in a converted shoe cupboard grow thing and ended her weeks in the main converted wardrobe where alongside the usual cheap LEDs she has had a few doses of the old UVB 10 reptile light. *Giving her a fantastic sugar looking crystal coating. My opinion through some research and personal experimentition* Although nuits problems showed in her leaves in the second half of her growing life and some forgeful watering, they produced some stunning, ever changing colours, which were ironically a nice change to see from the regular grows of green and would probably have been more concerned if it was happening to one of the other girls. The Purple to Red coloured main bud is bigger than the cup itself and weighs a ton. I had to put support in last week to hold her upright. Her leaves look fake and plastic as my wife commented, true too which makes for a nice look I've never seen before. perfect timing on the grow time although I could have harvested earlier to be fair but the bud just kept getting bigger and well, you know. .. As of writing I've not posted the root pics but will soon.. . Honest... I just like looking at her for now.. . Every now and then a quick admiring close up look at them buds..... I just don't want to part with her yet ok. give me time!
Likes
63
Share
Good afternoon gromies 😄 😇 😊 Week 9 was absolutely crazy. All my girls start to achieve an about high. NYC diesel is a smallest as she was but developing beautiful small hairy flowers 💐 😍 😇 Have a good night, You Lovely Girls Growers 😇 🙏 😉
Likes
2
Share
Flower moving along. Added big bud from advanced nutrients to res on day 32. EC is 2.9 DLI is 60.
Likes
6
Share
@Prilyfe13
Follow
02/07/2026 A new week and I believe we are starting the pre-flower stretch... Maybe. I'll ve leaving the nutrients alone for some of the week. I need to make sure she's in stretch or not before I change out my nutrients. She's already got white pistils and is 14" tall. That's 5" in a week. Not too shabby. Now if we can get an inch or 2 a day from here on out, I'll be very happy. Once I know the stretch is in motion, I think that's when I start changing out the nutrients. Like bud if itor and big bud. Oh and bud factor x. These all go in on week 5. Which should be this week, BUT I started the veg cycle early. So it's really a week behind. In that regard, I should be keeping the same mix as last week. So I'll compromise and change the water out when I know we are stretching. I snipped the main stem fan leaves as well. It was definitely a good idea. Now the branches have space to grow and not be impeded by massive fan leaves bigger than my hand. I left the very top two fan leaves as I like to do. I feel like the leaves are too new to snip off. Once the node gets a little bit older, I'll snip them off as I go. Speaking of nodes, she has 8 and is working on 9. But then I think that's it. From here on out, she'll be stretching the main cola. I have to figure out a way to tie the top down so the rest of the branches can catch up. I hand bend it, but not enough. I would need to be in the tent like 4 times a day. Not that I mind, but like 4 times messing with the environment will be a pain. The heater is overheating as it is. I'm gonna have to swap it out. Not sure how it's overheating. It should be on like 4. But then again. It's 1° f outside today. Wind chill is -17° f. So maybe it's trying to compensate. But it's like 70° f in the apartment. Outdoors can't play that big of a role, surely. Anyway, on top of popping some leaves off, I cleared out the small bit of growth under the canopy. The goal for this run is to properly defoliate and prune an autoflower. Only keep the top 2/3 of the plant. It won't be very hard to be selective with this plant. Everything is so very uniform. Something that's pretty cool is all the bud clipped branches are starting to grow at the same time and seems to be the same pace. This should level out the canopy to table top flatness. The only thing that will bother me is the top. Considering the fact that I couldn't tie her down, her top buds will be bigger than the canopy buds. Which is ok, but I want a sea of buds, not a nipple. We'll see how it turns out. Maybe if I hand train the top down, for a couple days, the branches will start to catch up. So I'm still considering the trellis net. I'm not sure though. I do have an air pump specifically for this purpose, but like how the hell am I gonna clean the bucket out weekly? There's just no way. None that I can think of. I mean I could slide the roots to another bucket for the time being, but how will I remove the bucket without lifting the plant? I don't know. Well, water pump it is I guess. That's only if I use the trellis net. Very possible. However, her branches are super strong and will definitely be able to handle heavy buds. And lots of them. The environment is looking good today. Happily it's stable, it at the cost of an overheating heater. 02/08/2026 Looking good today! I believe she has started the pre -flower stretch. She sucked down a little under a gallon in 2 days. So that's good. I'll be changing the water out tomorrow for some fresh nutrients. I think I'm supposed to start the transition from grow nutes to bloom nutes as well. I can't remember if it's before or after the stretch. I'm thinking after? I need to research this. After a bit of research, it seems bloom nutes start after the stretch. So maybe I won't be changing the water after all tomorrow. Who knows. I must research more. Other than that, she is a beautiful plant. Stretching out her side branches almost enough for me to be able to bud clip them. Currently they are long and thin and already leaning out, so no sense in training them yet. I'll wait for them to start really stretching. Then I'll do some more training, maybe. We'll see. What I've done so far might be enough. The goal is to fill half the tent. Front to back. Then the other plant does the same thing and I have a full tent. They have to stay a little thin and less wide though so they don't encroach on the others space. The humidity and temp are just wrong. The AI doesn't seem to get the fact that less is more. Oh well. It's pretty decent. 02/09/2026 Omg she is looking great! 16" now and just started the stretch. Beautiful greens and super thick stem. The branches aren't as thick as the blue dream in the tent, but they are definitely thick and sturdy. A little easier to bend too. But the internodal spacing on the branches is too short to fit clips in. So I'm going to wait until the stretch really gets underway. Auxiliary branches are starting to get pretty long too. But they're already horizontal, so no sense in bending them. Well, yet anyway. They'll start lift up soon enough. I might have to raise the light soon. It's 17" from the canopy. I want it higher and brighter. I'll probably wait for 15" then raise it back up to 22" and increase the intensity to probably 6 or 7. We'll see. Currently the DLI is 38 mol. I'd say perfect for this age. Very close to 40 but not there quite yet. Perfect. The environment looks alright now. I attached the hose to the humidifier so now it's dropping from above and is much more stable. Once I lift the light up higher, I'll feel much more comfortable. The fog is really close to the light. 02/10/2026 Well today is the day. I think. So I noticed the tips of the top growth starting to turn yellow. Definitely a deficiency. I'm guessing nitrogen given the need for it during the stretch. But what I'm going to do is increase the nutrients from 2.5 ml per gallon to 1 ml per liter. There's 15 liters, so it's half of what the recommended dose is. It should be fine. Readings after water change. pH: 5.8 EC: 880 TDS: 442 Temp: 64.4° This might not be enough nutrients. But we'll see for now. 02/11/2026 So I'm pretty sure I screwed up again. The water temp was definitely higher than 70° this morning because I forgot to add an ice bottle last night. So naturally there were bubbles all over the place. Like big bubble foam. Not sure if that's good or bad. But if it's bad, that's what Hydrogaurd is for. We'll see what happens now that I got the water to cool down. On a better note, she's still growing strong. Leaves are getting bigger, she's stretching and branches are making more branches. Lol. The environment seems pretty good now. No issues with the equipment specifically the heater. I raised the light yesterday and increased the power to match. Now the DLI is at 39 mol. Just under 40. I'll bring it over 40 after the stretch. I have CO2 in the tent, so I could go up to 45 mol if not 50 mol. But I'm gonna keep it at 40, maybe a little higher. It all depends on what she wants. I can definitely increase the intensity. Just don't want to risk light stress. On a better note, I have tons of space for this plant to grow. Like a good 3 ft. of space. So she can grow a good 4 ft tall and still not take over the tent. Well, no true. If she ends up being that big she will most certainly take over the tent. Let's hope the Blue Dream can hold her own. Anyway, I don't really expect a 4 ft plant. I'll be happy with 3 ft. As long as it has colas for days, I'm happy. Plus, height doesn't really matter in tents. It's width that matters. How many tops can one make in a limited space. Spread the plant out keeping a low profile. That way all the buds get light and not a select few that would otherwise be over the canopy. For example, this plant is going to be tall with a lower canopy and one main cola. I didn't really want this structure, but I don't have any tie downs. And the top won't grow a long enough node that's thin enough to bend. So I can't even use the bud clips. And now the side branches are building a lot of nodes and none are spaced out enough to use a bud clip on. Well, it doesn't really matter anyway. All the side and auxiliary branches are growing outward and not up, Soni don't need to train those down. Honestly, this would have been the perfect opportunity to learn how to top. But that bus went by a long time ago. 02/12/2026 So I topped her off today. Current dose. What's weird is that the water is still lower than when I did the new mix. It's only been 2 days. I'm wondering if I should be adding more to the mix to bring it back up to 450 ppm. The pH is fine now. It was a little high, but now it's back down to 6.2. The EC and TDS are way low. Like 800 cm and 396 ppm. I'm pretty sure I want to be around 900 cm and 450 to 500 ppm. Not too sure though. She seems to be a light feeder. Not complaining. Less nutrients to use. So now I'm wondering if I need to add more to the mix. Like 5 ml more of bloom and 2.5 of everything else except for Silica Blast and Hydrogaurd. Those are already at the normal dose. Maybe I just need more cal/mag? I'm not sure. I also wonder why the mix I'm using now is lighter than what I used before. It was 450. Should t it be the same 450 that it was before? Very confused. 02/13/2026 Friday the 13th! What a fun day. She got big. Explosive growth. It seems she hasn't started to stretch up yet. But she's definitely getting wide. I want her tall though. She should get taller soon. I don't mind a short plant, but she doesn't have enough nodes for my liking. Not enough bud sites. If she had like super short internodal spacing, I wouldn't be too worried, but she doesn't. Lol. Long spacing. So she definitely has some growing to go. No top off needed today. I did swap out the ice bottles. It wasn't that warm either, so I think I'm keeping the temp down all together. Technically, the water temp shouldn't be a problem at night and in the morning. But I can understand the heat turning on full blast during lights on. Now if I were a waking man, I'd be awake at 6 am to swap the bottles out. But I'm not. I sleep to like 8:30. Lol. The environment is looking pretty good. No complaints here. This is the last week of veg I think. Maybe not? I don't know where to place the pre flower stretch. Considering the name is Pre-flower, I'd say it's not flower, but it's not really veg. Well shit. I'll figure it out. Readings: pH: 5.8 EC: 700 TDS: 349 Temp: 66.7°
Processing
Likes
1
Share
April 22nd: Refilled 1st reservoir (first time in 7 days). Plants are 7 days into switch. Haven’t seen any pistols yet....running same nutes as last week. Will fill second reservoir tomorrow April 24th: Filled second reservoir mixed nutes as 12 gallon ppm was 650 vs mixing as 13 gallon reservoir 800 ppm Defoliated two plants (second time)
Likes
6
Share
For the Grow section on my page: Throughout the germination stage, I explored three distinct seed germination techniques: the direct soil implantation, immersion in a hydroponic medium, and the classic paper towel method. My tests involved the Gods Gift autoflower from Premium Cultivators, Northern Lights from Royal Queen Seed Bank, and the F1 Epsilon strain, also from Royal. My primary focus, however, has been on the F1 Epsilon strain. As part of my shift towards commercial operations, I'm currently pushing the potential of these seeds to achieve maximum efficiency and productivity. I'm in the midst of identifying the optimal strains for my commercial venture. My objective, quite simply, is to strike an optimal balance between quality and yield for my future cannabis crops. With astute business planning and leveraging emerging laws, I plan to provide these products at a significantly lower price than my competitors. End of Germination Stage - Staring Vegetation Stage Day 9 - I inadvertently oversaturated my plants with nutrients, which led to the immediate demise of two plants. A key lesson learned was that utilizing old woolite medium is not advisable. Instead, using dirt plugs proves to be a more effective method. Moreover, it's crucial to ensure that nutrients are introduced directly into the water supply to avoid any potential harm to the plants. Additional Note: For enhanced root stability and quicker access to the water supply, it's important to situate the dirt plugs deeply within the pebbles. Also ensure germination process as follows: 12 hour soak, drop into soil plug deep into hydroponics pebble medium.
Likes
6
Share
and another week in flowering stage now very visible in flowering stage. all nutrients are in ger section if not other mentioned all by manufactures instructions.
Likes
14
Share
Dear Friends, 👨‍🌾 👩‍🌾 we are here to show you our journey with the BLUE SUNSET SHERBERT™️ by Barney’s Farm. Every plants of Barneys is a guarantee. Also this strain (that I had growed months ago LoL) is a miracle of the nature. Vigorous plant covered of preflowers! Easy to grow and perfect to train. Germination started on the 10/11/2022, the root sprout on the 12/11/2022. 27/11/2022 Transplanted into 15L Smartpot ✅ VEGETATIVE week #7 (LAST WEEK) 30/12 SWITCH 12/12H 📅this week goes from 26/12 to 01/01.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 26/12 3ml/lt TOP VEG 30/12 TOP MASS 0.2ml/L + 2.2 ml/L TOP VEG 31/12 SENSI CAL MAG EXTRA 2ml/L foliar spray This new strain is hybrid produced from a cross between Sunset Sherbet x Purple Punch. It is a mostly indica strain, so, short flowering and big and dense buds! At the end of its flowering stage it will take a lots of colors, it is also beautiful to see!! I can’t wait to grow this strain! I’m excited like a child!! 🤓 🤓 We are glad to have the opportunity to try this strain from this experienced seed bank, we will do our best to grow this baby as well as possible. THANK YOU Barney’s Farm ❤️❤️❤️ ***WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night....*** 🤓+DATA SHEET+🤓 BLUE SUNSET SHERBERT™️ Cannabis Seeds Strain Specifications Type: Feminised Photoperiodic Genetics: Sunset Sherbet x Purple Punch Effect: creative euphoric sativa high + full body Indica tranquilising calming experience Indoor Yield (g):up to 650-700 gr/m² Flowering Time (days): 59 - 63 Taste: Sweet Candy, Citrus Aroma: Sweet Candy, Citrus Zest, And Sweet Berry 💸💸💸💸💸 Buy BLUE SUNSET SHERBERT™️: https://www.barneysfarm.com/blue-sunset-sherbert-551 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS: We are growing in BioBizz Light Mix, it is perfect also for the first weeks. TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
99
Share
@BudXs
Follow
The calm before the storm in the Scroggernaut - either yer scroggin or yer not ACMPR licence holder, allowed to grow up to 49 6 mothers, 2 strains for the 2020 photo run. Pheno hunt the best veggers to pick my 2 best moms, give away the rest. Also have 4 autos in there to kill some time while I veg out the moms Running 16 plants total over 40sqft ( a 4x8 and a 2x4). Will be doing 12 x dutch buckets coco/perlite mix on an automated feed and drain to waaste, as well as 4 x soiless mix handwatered for my son to learn the basics of growing. Big ups to the BOOFPARTY crew Lights are awesome. 3 x HLG 550 clones LM301b diodes. Room is self contained, fully climatised and insulated with vapor barrier. This is the garden I have always hoped to build Will be mostly video updates here, limited data. Not looking to win any contests with this
Likes
3
Share
These week we see a lot of bud production, these wonderful Strain is becoming totally frosty and smelling is getting better and better , and we are also stopped with the feeding these is the lasr week, after next one just water to flush!!
Likes
101
Share
Esta semana la temperatura subio un poco. Las flores empiezan a engordar y se empieza a inundar todo de olor
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.