The plants are doing well. Go on.

Looking great top dress a couple days ago..now jus watering at a ph of 6.5 to 6.8......

- Sensi Seeds Research The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. - 7 weeks in soil (week 7), this is where the ScrOG is a good method to keep on vegging your plants without getting too tall, saving space for the future stretch. Indoor growers are limited by the ceiling, this is the best way to keep on growing roots, more roots more fruits 😉 Sensi Seeds strains are perfect, it’s a pleasure to grow such genetics, everything is going like expected, each plants are doing their thing very well and dose respond marvelously to the plan, in time with no delays due to shitty or sick and weak plants ! 👍 - For the beginners : Setup the first trellis on the top layer, then lower each corners to the bottom level, smashing the plants and the 2 main stems to the third node where the topping has been done (see previous weeks). You will gain approximately 30cm of growth, and you will be able to keep on vegging them without getting to tall, as mentioned more roots = more fruits, and you will avoid long legs (don’t grow legs!!! They will have to be trimmed later on) where all the popcorns and small buds tend to grow. Remember, you are here to learn how to knock a ball out of the park, this method is complete, you avoid plants getting too tall and finishing with your buds too close from the light, killing all the essentials oils and terpenes (you will kill flavors and scents), you avoid to grow legs finishing with tall plants and just a ball head of canopy, you avoid small buds and popcorns by applying the incoming method in the next weeks where you learn how to clean your legs . Then , once you smashed the plants with the first trellis (you’re supercropping by doing this bro) , the junction of the stalk (at 3rd node) will probably split in half, no worries it will heal by itself. You just need to put second trellis on top ! -Watering and feeding, that is the question ? 😄 I’m looking the leaves lol 😝 They are around 2l every 4 days at this stage , I’m not watering until drains come out for the moment, I’m keeping all the good stuff inside the pots another week or two. (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control 🐞)

Le piante più grandi sono nella 3 settimana,le più piccole alla 1 e alla 2. Le più grandi hanno fatto il sesso ma ancora non fioriscono,fra poco somministreremo auxine naturali per dargli un pò di fgas

The first week went smooth for the 5 Pineapple Chunks. They stretched just a litlle bit the first 3 days. But I will solve that when they go in the airpots. I haven't turned on the Airfan yet. There's enough fresh air in the tent for the seedlings and it's not getting to hot. The cobs are dimmed to 60 watt at 49 cm (19.3 inches) from the seedlings giving me a DLI of 16.1 The heatmat is set at 23°C (73.4°F) and there's a small fan blowing a gentle breeze along the seedlings. This will give them a stronger stem. Once this week I gave them ph adjusted tapwater with a small amount of nutrients. I added 0,80 ml Rhizotonic + 0,80 ml Cannastart to 500 ml (0.13 gal) tapwater (ec 0,77 – ph 6,0) and gave each seedling 75 ml of this solution. Temperatures stayed between 22 – 25 °C (71.6 – 77 °F) and humidity between 48 – 87 % That's it for this week! See you within 7 days. Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈

this is the beginning of the 4th week along with the publication of the end of the 3rd week, this is how the fourth week is received, another intensive pruning that has no choice but to do it due to the size of the indoor, which is working great for us and we believe that I will always work like this, I am happy, here then the pruning of its results a little before and after and how it is receiving this fourth week, with the threads I touch a little bit of hair I hope it does not affect much but all in favor of opening the field to all the branch buds alike.WE CHANGE THE MESH FOR A BETTER ONE AND OF THE IDEAL SIZE AND AGAIN WE USE THREADS THAT HELP US VERY WELL, WONDERFULLY

Welcome growfessors to my outdoor 2021 grow! It's been 4 years since my last outdoor grow. We've got LSD and Green Crack outside, each one in half a 55 gallon container, in pro-mix HP, with Gaia Green 4-4-4 all purpose powder nutrients. Thanks for stopping by growfessors 👽🌳💚

Day 127. Chop day !!!! Zkittalicious #6 is my first plant without any airy or small bud !!!! Plus he will be like others in 100g range ... #2 should beat all single plant records ;))) Happy Growing !!!

Lots of work this week on keeping up on training this week, buts it’s going well! I split a fork when tying her down but the duct tape fix worked great and she didn’t exhibit any stress from it surprisingly :) Each day I tighten the bindings and then defoliate about every other or 3rd day. I keep doing 2 feeds to 1 yucca flush. She now uses 3 gallons to get my saturation and 20% runoff, about every 3 days. When I yucca flush I also foliar feed her to keep things flowing, roughly 1/8-1/4 strength of my food dosage. Foliar feed mix is yucca, kelp, fulvic acid, 1-0-0 Calmag+, and a 14-0-0 ominA. And I fed that every day for 3 days until I watered her again :) Interestingly, 3 days in a row just barely began to give her N toxicity by causing a slight clawing of the mature fan leaves, but no burn in the tip, and day 4 she was flat out again :) so it was right at the edge of useable nutrients IMO. The netting is coming along nicely, lots of weaving going on, refilling the center and spreading the mains out to the corners of the tent. Tried 2 different cloning techniques, one placing them into the peat pellets from Walmart with rooting powder, and the other is a Tupperware container filled with a PH’d weak nutrient solution, and sticking the stalks through the lid into the water. Both techniques have produced roots, peat took longer but are stronger specimens. Tupperware seemed to shock them less but roots are tiny little nodules. Thanks for stopping by and checking things out :)

End of week 2 on day 14 (photos). On day 11 or 12 the roots emerged from the net pot and hit the reservoir at water level (see video). I didn't notice it until day 12 however. No environmental changes. She looks healthy and happy.

Was very happy with yield and quality. Very satisfied with the 2 mars hydro sp150s used in a small 20x36" tent! Over 1g/w

We think one of these lady’s are being thrown in to flower by me stressing it. I topped it and I think I shouldnt have , They originally got stunted due to environment technicality difficulties / grower error. Humdifier died , power outages the works , all sorts of obstacles have taken place . But we will see this through to the end for, learning and journal purposes. Happy grows

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Chopped on Day 70 (September 6th, 2020) 9/6/20: Hung her to dry after taking off most of her fan leaves. I decided to hang the whole plant this time around to see if it helps my dry quality. Will update with pictures soon. 9/12/20: Trimmed her up today after feeling that the nugs were crispy and dry. First couple days of dry we were experiencing a bit of a heat wave and high humidity levels (fluctuating from 60-75%). During the final days of drying we had rain and then it cooled off and dried out lowering my rh in the tent to around 50%. That crisped the nugs right up in 2 days and I decided it was time to pull her out and trim her up. The nugs were so incredibly sticky and smelled of chem. They are really dense despite their look especially the main cola nugs. Still smelling a bit like hay but I'm confident that the curing process will take care of that. I am curing with Boveda 58% rh packs in each jar and a hydrometer as well. Not going to test a nug until at least a week or two of curing or until I run out of Sour Crack lol. Will update with a smoke report. 9/28/20: So it's been just over 2 weeks of curing so far. When I first put the nugs in the jar, I was worried they were a bit too dry/crispy for what I was hoping for, but after 2 weeks of curing the nugs aren't as crackly sounding in my hands. I cured with Boveda 58% rh packs and mason jars as seen in the pictures. **SMOKE REPORT** 9/28/20 - 2 weeks of curing: The smell of this strain is a really unique one, or maybe the pheno that I got is. It smells fruity for sure but it has this gas smell to it that almost smells chemical but in a good way. I marked down tropical above because the combo of pungent fruit almost brings out a sweet cocktail aroma. After really thinking about it, I've never smelled weed with a scent quite like this one! The smoke was smooth in my freshly cleaned bong and I'm decently high. I feel pretty tired but I'm ready to do something like game or make music. I don't feel hungry (yet) but my throat is begging for a drink. I'm happy that I have now smoked my own home grown weed twice!

This week went pretty well. I was worried about the flower stretch, and running out of room. I have a tall tent, 80" but with my huge 8" carbon filter, lighting, and automatic drain buckets I have the pots sitting on, I really only have about 48 inches of actual plant height to work with, which I originally thought would be MORE than enough room for Autoflowers, now I am not sure. This lady definitely almost doubled in size this past week. I am still on 18/6 light cycle, and feeding 6X per day in coco coir via a timer (drain to waste) with the runoff being discarded out of the tent via a gravity fed auto draining system I built. I started adding Liquid Kool Bloom this week to help the flowers start to thicken up, and I am also still using about .5 tsp per gallon of Cal Mag (for the Coco, not the plants) and dry kool bloom at about 1.5 tsp per gallon. I am keeping my EC around 1.5 and keeping my ph in a range from 5.7 to 6.2 Please let me know if you see something I am missing or should be doing better! Thanks for checking me out! Blaze on!

Ho regolato il dimmer della lampada al 100% e distanza 30cm perché si sono allungate troppo i primi giorni. Continuo ad annaffiare solo con acqua ogni giorno con l’aiuto di uno spruzzino

Primera semana de flora a 12/12h.

in the previous weeks i did too much defoliation. error !! ❌❌ I don't know where my head was ahahah 🤯🤯