Every video and picture were taken on the same day (113/ week 16). If you look at the bottom branches and colas, the pistils are nearly finished and there aren't many clear pistils left. I have attached microscope photos as well. It is important to check many sites on the plant, as only checking one or two colas may be deceiving as to if the plant is ready to harvest or not. I have taken the lower branch and chopped it about two days ago and will sample it in a few days. I'm excited for this plant to be done soon.

On some pics you can see the orange trichomes so its getting time for the harvest soon. At D45 we stop fertilizing, now they will only get tap water (-pH) for the last 5 days, after that they will get 2 days of darkness

Not a lot of grow photos this week since we were camping two days' into the backwoods at Temagemi this week :) I have added a video garden tours so you can see what's up this week. The fight against powdery mildew is real. But harvest time is here just in the nick of time!

Welcome to my MilkyWay F1 Topped/Untopped Diary sponsored by RQS. Topped/Untopped Phenos 1/2 Pre Flower Days 12-15, Flower Days 1-4 Days 57-64. Plants are quick. Didn't put on much height during pre flower. 43 cm for the Topped (pheno 2), and 41 for untopped (pheno 1). The pistils surprisingly are 50/50 amber/white. They're in the fattening stage only a few days. I've added co2 for 12hrs and then they are going under my P1000 for 6hrs. Hoping to see some big buds. They are moving quickly. So, let's see. I've added a 13-14 PK booster from plagron with a few of their other products. With the 12hrs of extra heat and co2, they'll be needing a lot more nutrition. Diet/Defoliation/Temperature Was on a Full Plagron natural line and a few of their other products, and I've added a 13/14 PK booster, with fish force and a few others. I done a 10-15% defoliation removing many fan leafs, focusing on the middle to allow better airflow was done after pre flower. And more will be done coming into her next week "10" and light lollipoppoing at the end to clear any possible larf areas was done this wk. So, what's therenow will be brought to harvest, a lot is very far away, so I need to get a blue HID I think to control tight Inter nodes in veg, I'll do this as I gain more experience. 28-29c is maintained for the co2 addition and under the P1000 the temp is brought back down to 26c with no additional co2. And ppfd is lowered to 850 ppfd but its a deep penetrative led light I'll give it that. Actually it carries the highest ppfd into your canopy than any 100w out there, and this is the 2021 version. They've an upgrade. Much respect to Vipar, this light and the Spiderfarmer have been my veg lights the past Yr, and this yr I've used these both and they've produced some quality bud. The cbg is done fully under them and the plant is amazing. Diet, Shes on the Full Plagron Natural line, soil and all. "Pro mix" with mega worms to add later. With PK, green sensation, fish force, power roots, vita race, "dummies sent me 2x of these instead of Start" Silic Rock, Pure Zym Sugar Royal. And Terpinator. "Power Roots has been pult, its time recommended by plagron. The roots are plenty and they drink close to 1L of fluids a day. Normally I don't like given so much stuff. But all are different, (expect Terpinator and SR they've the same purpose but its only 1 feed of the Terpinator a wk, by itself 370ppm 6.1ph 15.5c temp.. Co2 Co2 is maintained at 1000-1300ppm for 12hrs. And then when they go back under my p1000 they get ambient co2 levels 675ppm. The co2 is been ate at 350ppm every hr. Mind you most of these girls aren't hitting a high ppfd that's needed to convert into sugars. I've shuffled my 3 fans. 2 fans 1 on the top left blowing above canopy and 1 on the other side. A small one is at the bottom that keeps the heavy co2 off the ground. And my moving my fans, the co2 went from 1000 to 1300 shows, right air-flow is paramount. Thankfully I've a sensor that reads every second and is so sensitive it allows you to move your fans and shows how much longer co2 lasts if kept at an level with the foliage.. WARNING: Co2, is no joke. You can die from inproper use. I fully advise if anything you get a top sensor at least to known your levels and then you can jerry rig whatever. If not using a full kit. I highly urge to have it only in use while you're there to monitor it. No way should it be left on. As co2 is heavy it'll flow down your stairs and your beloved pets will be the 1st to suffer. It doesn't take a lot of gas even from a 1L bottle to fill a 12x12M room to 500ppm.. mine does 3x1L bursts every hr at 0.00001L a burst. Thanks to my rep James's for the seeds & merch. The rolling tray is constant use. My bird sings its praises. The grinder, possibly the best out for grinding. Goes through wet bud like dry. It grinds it that well. When I'm trying the get a small of her tetpine profile. COUPONS Spider-Farmer "ggst" EU (for now) 3% Mars-Hydro "ggs" WW 3% Zamneisa "GROWITGD" 20%

I love all my plants, but this Euphoria has been my favorite since the start of this journey. A REAL MONSTER since the beginnings!!! By the way, I’ve had a BIG PROBLEM with my digital timer after the 12/12 switch: the led panel didn’t switch off completely because of one defective timer. A little light was always there, like the light of the Moon. This caused the plants not to flower for about two weeks. The other problem is that I immediately switched to the bloom nuts schedule and completed 3 weeks of it. But the flowering period is about to start now!! Thanks to Mr_Di, we’ve realized it’s better to give these current nuts for the next 3 weeks, just reducing B-52 and Bud Bud by 50% (because it could be a little too much). After 3 weeks, I’ll resume with the normal schedule for week 4. I know it’s a bit tricky, but if you have other solutions, please leave a comment below! I can’t flush now, because it’s risky and I should do it to all my 9 plants. Unfortunately that’s not an option!! DESPITE THESE PROBLEMS, flowering here is about to start, YAY, and you can see that from the photos!! See you next week, buds! 👊

9/17 Didn't know this was a new week or I would've taken more pictures. I'm glad I took those two plants. As it dries and I start to trim I could see where it could've turned to rot real easy. It rained enough last night to soak all the girls. The two bottoms I harvest look like the have pm on them. If so I'll wash it or through it in the concentrate bag. Found a few colas a dropped which will go in the concentrate bag. Scoping the toasted toffy and the event horizon and the both look AMAZING! I've scoped the others and I'm extremely impressed. They may be difficult to grow strains but they have high cannabinoid content. The sherb cream pie has really come to life and turned totally purple with beautiful flowers. The girl in the 50 has several soda can sized buds. I hope this weather holds up. I don't like flowers this size getting wet. The sativa leaning hydrid us the only one I may have trouble with. It's only in a 10 gal but it's enormous! If needed I coyld bring it inside at night. The buds look like cat tails. I'm used to growing indica dominant strains. Plant us super healthy though. I'll be intrigued jail for a while and I've gotta make contact with whoever is going to do my extracts. I'll keep this updated. It's a lot of work bur it's worth it. 9/18 WATERED EVERYTHING I GALLON BUT THE BOTTOMS OF THE 2ND EV AND THE TT WHICH EACH GOT A HALF. Since harvest I've noticed some pm spring up on the toasted toffy. Looking at the other event horizon through a scope the trichs are all milky with some amber. I'm just waiting for A LITTLE more amber. And for me to have time and or room. I decided to harvest the tops and majority of one of my event horizon and toasted toffy. Today during an inspection I found a couple grey mold branches and some botrytis on my big GMO on the back. This plant is done. It's by far the furyhest ahead. Septoria effected the yield a little but pistols were retracted and amber was at like 10%. I thought about it and I watched the plant next to it with the pm have a branch I supported just "slough off". Right in my face. I figured if there was a sign tjis was it. I cut that rot off and put the buds from the branch in a bag and froze them then I went around and harvested the limbs on the other plant that were furyhest along. I took about half of it. I could've taken more and maybe I should've but I'm tired. I also noticed a couple spots of grey mold on the plant in the 50. All the leaves were falling off. I finally scoped it and it was right whetr I wanted it to be. Looking at the colors I'm glad I spent so much time the past few days. That one I hung whole. The sherb cream pie has something eating the fresy shoots (probably ear wigs. But the buds are fattening and the trichs aren't quite there. I'm going to let the rest of this stuff go ad long as possible. With the exception of the other event horizon. I finally tried it. It's fucking killer. I could take that plant now. The only reason I'm not is because I have to much work on my husband's as is. I'll do some videos amd pictures but I'm tired as fuck. Got to try event horizon. Very fucking impressed! 9/19 The past 3 days I've been working 5 a.m. to dark. I went back and harvested the bottoms of the toasted toffy and event horizon 1. After injury from harvest they contracted wpm. I used this as a learning experience and put some away in the freezer for concentrates and used a peroxide and water bucket. That's what kills the p.m. anyway. I hung them and they spun in the wind. I blew them lightly with a leaf blower before putting them ok strings I had previously setup with a fan in front of it. I kicked ass today. Toasted toffy got sampled and did NOT disappoint. I had it in a jar though and it was green so I'm not counting this. I do have some dry. I have indoor left too. Like in the video that one GMO looks like it's fucking dying or something. I'd rather cut it and use it for concentrates if it effects my healthy plants. I just checked on that plant in the 50 I hung. It looks amazing under the scope and smells better. Decisions, decisions. I do have a few calls I should make sooner rather than later. We are supposed to be getting rain. 9/20 The past 3 days have been hard. The wife's medical stuff is acting up and I had to tend to harvesting a few. My whole body hurts. I even did my first bud wash yesterday! The ev and tt I took and left some buds on ended up covered in pm. So I decided fuck it and tried bud washing. I also froze some for extracts. Speaking of which I need to male contact with whoever I'm going with this year because I think I've reached the point of diminishing returns on that dieing GMO. When it comes to grey mold and botrytis I don't fuck around. Winds are really high today. Putting the scope to the sherb pie is making me second guess myself too. Oh well. It's not going to rain today. And if needed I can move them in the barn. If I get ahold of Mt processor I'll chop that GMO and bring it right there. The other thing is that I've got tons of weed and a lot of its hanging so I've gotta find someone that will do a batch of live rosin then like a elbow of dry. This is the best part of the year. We'll It's supposed to be. Cutting down good plants us bittersweet. I don't mind chopping that one gmo a little early though because it's close to hitting the point of no return. That little sativa dominant hybrid in the ten is HUGE! The buds are swelling like crazy too. It's got a COUPLE septoria spots but this thing is resilient and easy to move around. This will finish perfectly. So far I'm happy with what I have. I'm GRATEFUL. The two September plants I tried were GREAT. A 90/10 and an 80/20 and they both suprised me and got me exactly whete I wanted to be. I'll keep things updated. I did a video I'll upload. 9/21 Weather is still great and the buds don't even seem wet in the morning. The thing is is that something (rot or ear wigs probably both) have stripped lower interior branches. In some cases stripping them ENTIRELY or chewing the stem right off. It wasnt happening to my favorite GMO or the one in the 30 and the like on in the ten. The Sherb pie I noticed grey mold on 3 different branches. Last time I checked trichs it wasn't ready but I've got to get a handle on this mold/pests or it's going to he taken a little early. We have incliment weather coming Wednesday I think. I'll bring the 10 inside and if I have to I'll bring that perfect GMO in as well. I'm going to scope everything again today. I called a bunch of extractors for prices. I was going to do fresh rosin and just yank and drive but that is looking to be harder. I can get badder made CHEAP from a reputable lab. I think I'll do that. They prefer dry and that way I could through what's left from last year in there. I have this other one GMO that I've had the same issues with. I'm sick of removing bud rot or having to cut interior branches off due to pm. Tried toasted toffy and it was fucking amazing. I'm planning on trimmingvthe ev and if I finish I can bring the other one in. It's done. It's not getting any bigger. Trichs aren't changing. That GMO I am going to scope when I get home and it will be coming down in the next couple days. Otherwise I'll end up with half of what's there. The GMO I took the tops from is finishing up too. If I scope that and it looks decent and I have the time I'll take the remainder. I'm leaning towards doing at least a lb dry for extracts. I've got some frozen. I've got some hanging and most is still in the ground. I sleep on all major decisions. However, I know getting my nice buds soaked when I'm already losing shit to budrot and grey mold isn't the smartest thing. I'll probably take what I can and bring the others inside to keep them safe. I didn't think I'd have this much quantity. I knew quality would be good but this isn't a bad year quantity wise either. I'll keep this updated. 9/22 Busy as hell! Rain coming Tuesday. After a final check of the scope and the flowers and I took the GMO that all the leaves had fallen off of. That plant is going straight to extracts with the one in the thirty. I also "finished" harvesting that GMO that was furthest along. Trichs were getting amber. Been in trim jail. Was going to take the Sherb Pie but I'm not seeing amber yet. I did have to cut off some branches that had rotted. I'll keep an eye on it. It will come down when it's ready. It just sucks losing little bits of it. My favorite GMO is sooooo close to perfect. I should just take it but I'll wait. If we get rain I'll bring that and the sativa looking one in the ten is the barn. Back to work now. Before I forget what strain is what lol. 9/23 Still busy as fuck. I chopped the other event horizon amd hung it whole. It's DONE and it doesn't need to go through the rain storm. I also took the majority of the GMO early pheno. What's left will get plucked off and used for extracts. The big one in the 50 is getting dry. I have finished the event horizon and I'm not "finished" with the toasted toffy but I have it in 5 gal buckets with a food grade lid so u can at least cure correctly. The gmo is still hanging. I'm wondering whether I should wait it out or chop. I'm gonna take care of what I have inside first and hope that shit doesn't eat my plants or that it doesn't rot off. That perfect GMO has one branch with some grey mold. I might cut it off. I'll keep this

I think the situation is very good. Im exciteed to see lst result Day 20, lst show good results. She drink so fast now. Day 21, going for week 4, what you think about she?

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Stretch continues, hedgehogs coming along 🦔🦔 Weather start to be better with up temperatures. 💪 Just let Grow for the moment, try to kick off Fan leaves 💧 Give water each 2/3 day 2 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) 2 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 35 cm. Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

Ça continue 😍.

My hybrid is growing nicely .. Sorry i have not been posting data problems😂🤣😂 but she is coming along nicely.. Yes she is a hybrid lol

Stretching a bit which is normal in föower, its a good size plant eventhough i like them vigger it still has potential. Its tiny and underdeveloped compared to the dwc version but what did we expect ;)

Week 9 Amnesia Amnesia 1 (Seedstockers) With LST 5 weeks of flowering It has 55 centimeters 14L LED 25 cm Lux 59.000 Amnesia 2 (Seedstockers) Without LST 3 week of flowering It has 60 centimeters 14L LED 20 cm Lux 70.000 Gorilla Cookies Auto (Fast Buds) 4 Week (31 days) It has 11 centimeters 16L LED 56 cm Lux 25.000 This Week - Defoliation and LST Godzilla Cookies (Herbies) 3 Week (21 days) It has 9 centimeters 15L LED 60 cm Lux 24.000

Beginning of week... Well, I had to work late last night.. So, she wasn't watered for 24 hours.. I have been having to water/feed 2 to 3 times a day due to the media drying out.. The roots are insane in the cup.. Alot aLoT ALOT of fuckin roots.. This is my first cup grow that had this much roots.. So yeah, I could see her drinking like a mf.. Which she does.. She is happy and healthy... Besides the underwatering today.. I couldn't be more happy with the way this girl is growing. After 7 days of 12/12 and the tops are starting to form pistils.. Next week should be epic pistil growth by the way she's been growing so far.. Will update when she perks up from the underwatering.. Later that day.. Shit.. She perked up.. But not enough to show a full recovery pic.. I watered when I took the underwatered pic and before lights went out.. That was only about... 4 hours.. Usually the girlies perk up after about an hour or maybe 2.. I'm sure she will be fine in the AM.. Oh yeah I forgot to add in the veg cycle I was adding 1mL per L of water of Silica.. So that should have helped her build up a good immunity to my abuse.. This is the only hiccup so far in the grow.. No more stress! Will update on the issue in the AM with pics whether she fully recovered or not 24 hours after decovering she was underwatered... She perked back up.. I forgot to mention that I have been bending the tops to help the lower branches stretch up some.. I remember reading somewhere that is another form of LST, I believe. I'm pretty much just bending the top 2 - 3 nodes to point straight down.. Which is just enough to not snap the top completely off.. When I release the top she stays pointed pretty much at 90° away from the center of the plant.. A few more side branches have almost caught up to their main tops. I read that it kinda like tricks the plant into thinking she's topped 'in a way'.. I feel like it just stresses the branch upward from where the most bending is at.. And the side branches are not being stressed at all so they keep growing/stretching at normal speed, if not a little faster, while the top above the bend has been stressed and slows down, if not stops completely. Just my 2 cents on the dealio.. Just bend the main tops downward 180° from the center of the plant, so that when you release the tops, they stay bent over at 90° (or tied like LST) and let the bottom branches get all the light.. After a couple hours, the tops will have probably already pointed back upward..😁 The capacitor on my home AC went out.. Temps in the tent got up to 90° F.. Leaves were pointing upward.. Praying.. But also canoeing.. Luckily I checked google and youtube on how to fix it.. I fixed it in under 15 mins.. Got the temps back down to normal and just made sure I kept her good and watered thru the heat stress. She is good now tho. The pics for today were 6 hours after seeing the heat stress. When I say LST this week.. Its just bending the tops down as I stated earlier in the grow.. I even removed the ties that I did have.. I shouldn't have done that because the tops kinda bunched together.. Oh well.. Live and learn.. Shouldn't create any issues.. Its easier to water now.. i was using a 1 fl oz turkey baster that worked very well.. But also time consuming.. Now I can just pour straight out of the powerade bottle I use to mix and store nutes and water.. I never keep anything mixed for more than 2 or 3 days at the most.. I have just ordered a bunch of hydroponic stuff.. And organic stuff... I can't run both at the same time.. I don't know which to try first.. Im thinking try hydro first.. Then organics because I think organics MAY be where I end up but still wanna try hydro to see how it ends up.. Hmmm... Went ahead and lollipopped her and bent the main tops down.. One branch kinda snapped so I think it was pretty much supercropped lol whoops.. Didnt break the skin tho.. I dont really care for defoliating alot.. But I always end up doing it anyway.. I need to stop lol

Nothing added this week other than a compost teas with freshly cut alfalfa & fenugreek with a little frass. Growing very fast and very well