The Grow Awards 2026 🏆
Likes
Comments
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 I spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D36/V32 - 21/05/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL in her new home and one TL of LST job ______________ 📅 D37/V33 - 22/05/24 ⚗️ EC: 1.0 pH: 5.4 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 LST 🧠 🚀 🎬 1 TL video and one TL of LST job ______________ 📅 D38/B01 - 23/05/24 ⚗️ EC: 1.0 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 2L 🍗 💧 💼 🧠 As I saw clear signs of blooming, I need to pass to bloom phase so I put B01, in the header. 🚀 Clearly she's starting flowering 🎬 1 TL video and 1 LST video ______________ 📅 D39/B02 - 24/05/24 ⚗️ EC: 1.1 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video and 1 LST video ______________ 📅 D40/B03 - 25/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 15L 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D41/B04 - 26/05/24 ⚗️ EC: 0.2 pH: 5.3 🌡️ T: 20°C H: 70% 🌊 🍗 💧 💼 Flush for two days and then flowering nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video ______________ 📅 D42/B05- 27/05/24 ⚗️ EC: 1.1 pH: 6 🌡️ T: 20°C H: 60% 🌊 15L 🍗 Calmag - Bloom A-B - Bud Candy - B52 - Big Bud - Seaweed 💧 💼 👉👉👉 Changed res and added nutes 🧠 I think no more LST, she's now full blooming 🚀 🎬 1 TL video
Likes
11
Share
@Ninjabuds
Follow
The Blackberry Moon Rocks are looking promising. One of them is growing into this beautiful little bush, and I think it's almost ready to harvest. The other plant is stacking up buds, but I'm thinking it's still a couple of weeks away. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.
Likes
8
Share
Letzte Tag der 7. Blütewoche Royal Domina Leichte Purple
Likes
14
Share
@Lazuli
Follow
the plants look like they will be ready in 2-3 weeks i only give bloom booster and calmag from here
Likes
2
Share
- LAS PLANTAS CONSUMEN BUENA AGUA, BAJAMOS LAS DOSIS DE FERTILIZACIÓN Y YA EMPEZAMOS SOLO A REGAR CON AGUA Y PRONTO LAVADO - NO SE VEN CARENCIAS NI EXCESOS - el HPS de 600 MANTIENE MI AMBIENTE SIN MAYORES INCONVENIENTES -ESTAS SATIVAS TOMARON UNA DUREZA INCREÍBLE EN SUS FLORES - SATIVAS DE LARGA DURACIÓN MUCHA PACIENCIA PARA CULTIVARLAS
Likes
9
Share
@Headies
Follow
So I have spider mites. I screwed up so much i think this is going 15 weeks. Lost coast to the rescue! time to finish these buggers off
Likes
7
Share
@NO_DRAMA
Follow
Very strong plant 💪 Bravo Inseedious👏
Likes
12
Share
@Natagoat
Follow
This week has been another good week ive increased feeds as she is super thirsty and getting watered every other day other than that ive let her get on with her thing. Ive gotten a new usb microscope and had a bash at taking pics with that, but its going to take some practice to get good images until I chop and use the stand or make my own stand.
Likes
17
Share
This week ia am planning to let it grow just like this. Hopefully I will receive a plant camera next week to monitor my VPD. Also added an IRheater to keep temperature stable The infrared heater does its job, but I find it a waste of electricity, 3.6 kWh in one night. So I've decided to install a gas heater instead, which delivers the same result at a much lower cost and also provides additional CO2. The heater can then keep the temperature above 21˚C with the lights off. The natural gas heater will be used with the lights on. I need to quickly find a CO2 sensor because too much CO2 has a counterproductive effect, as I've already noticed. Approximately 1200 PPM at 32˚C is optimal as long as I can maintain a DLI of 35. Great technology is on the way. Added: Installed CO2 burner, run it for 6 minutes every hour. Temp raises from 22˚C to 27˚C in about 7 minutes. CO2 detector (just colors, no values) doesn't alarm so not above 1500PPM CO monitor also no alarm :) Running for 4 hours now and a visible change is there. Tomorrow I will know if it is ok or not. Added a few pictures. Lets see if we can see the difference tomorrow. 26-05: Added Dimlux Maxi controller for CO2 and VPD. Works nice. 28-05: Topped a few 31-05 Added additional 300W to heat the stuff up. RH is stable but high on 72%. Could add a dehumidifier but since CO2 is already there and my VPD is around 0.8 I thought adding light would be cheaper. Can go up to 33˚C before my floor is heating up too much. Also cleaned the watertank. So from now on they are on Ata Max
Likes
5
Share
24 June 2025 Feed them with seeds sprouts tea, alga grow, liquid seaweed and also top dress the soil. ⛑️⛑️⛑️ NEED HELP ⛑️⛑️⛑️ I have noticed my spot found by someone else. I can tell they visiting my girls. What would you do in this situation?? Please leave your opinion. Thanks
Likes
13
Share
@Lfuego22
Follow
Good week. Day 41-48 from clone about day 21-28 in veg 3 weeks in clone
Processing
Likes
8
Share
Likes
48
Share
@Rangaku
Follow
On the wind down now , 1 more little feed then flush . She looks happy having the tent to herself .
Likes
3
Share
Slow grower but I think she looks amazing so yeah no really to much going on so yeah thanks guys and stay tuned