Week 3 has been great! We topped 2 Pre 98 Bubbas and 2 Dirty Blondes so far , 2 other Pre98 Bubbas will also get the topping but just gotta give them a few more days and they will be ready for it ! Once we have a little time of recovery, we will be topping all these ladies at least 2 or 3 more times so you all keep them eyes peeled! I hope you all enjoy an have an amazing productive week ! Peace love an positive vibes to all my Growmies out there Cheers 😶‍🌫️💨💨💨💨💨🤙🏻If there’s any questions, please ask I’ll be happy to answer ✌️🏻

🤪💥made it to the end. 95% cloudy 5% amber.

BCN Power Plant Week 13 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Sensi Cal-Mag Xtra: 1 ml/L Power House Part A: 1.5 ml/L Calcium Plus Part B: 1.5 ml/L Stimulus: 1.5 ml/L Bud Explosion: 1.5 ml/L

Semana 5 ( 05Nov-11Nov) Única rega da semana foi dia 11Nov. Os nutrientes foram misturados em 1,5L de água. Primeira dose de Bloom administrada.

Am 5.12 (Tag 89) geerntet. Die Blüten nass getrimmt und mit Stengel waren es 334g. Jetzt reifen die Blüten in meiner Bonsanto FermentBox noch ca. 7-8 Wochen bevor ich das Endprodukt testen werde. Ich hatte einen Stromzähler der am Ende 360 kWh und 1861 Std 13 aufgezeichnet hatte.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

11/19 start of a new week.ngot watered/fed yesterday. 11/22 watered with saps and inoculatednwith BB

*Week 3 Flower - 09/10* Blimburn Apple Fritter - Seedsman Genetics Critical+2.0 Healthy - 0 signs on of deficiencies Most fan leaves have been stripped; - Lighter defoliation - Aggressive LST on main colas *Week 3 Flower Mid-week update 09/13* Approximately 3 inch increase in Height on both plants - Critical+2.0 - Seedsman Genetics - Blumburn Apple Fritter 1 Gallon increase on water feed (Nutes included) Budsite density has increased. Light defoliation *End of week recap 09/16* (Week 3 Flower) BlimBurn - Apple Fritter - 47 Inches - Flowering processing accordingly - 0 deficiencies Seedsman Genetics - Critical+2.0 - 46 Inches - Flowering processing accordingly - 0 deficiencies Increased water feed (2.5 gallons every day +Nutes) *SEE UPDATE END OF WEEK VIDEO RECAP*

New week starts. ☀️08.11.2023 All in it's best. The signs of magnesium deficiancy are seen on one 'Special Queen' plant and aren't spreading. No watering today, only 'TA Bio Bloom' spraying. ☀️10.11.2023 I've watered two of my plants with 'TA Tripart'(100% of flowering formula) + 'TA Bio Bloom' + 'TA Silicates'. Spraying with 'TA Bio Bloom' also. ☀️13.11.2023 I've watered 3 of my flowers with 100% 'TA Tripart' + 'TA Bio Bloom' + 'TA Silicates'. Sprayied them all as usual.

Day 52-64 (Day 54) I’m going to thoroughly inspect each plant and remove bananas if found. So far it’s only been the one on #7 but I don’t want to take a chance. I’m also going to give a watering with some runoff. (Day 55) Can’t find anymore bananas but that one. I will probably find a few bag seeds but who knows. It’s way too late for pollen to really have effect anyway. These 5 plants finish nice and early compared to my other tent flipped on the same day. I would never take this strain 65+ days like last time. I would do 56-60 days next time I flower this strain (Day 58) Holy shit this tent is fading like crazy now. They are starting to show some beautiful autumn colors. #1 #5 and #7 are definitely done. #3 and #6 could use a little more time so I’ve decided to take them down on the 24th. I haven’t seen anymore bananas and the one that popped out on #7 has shriveled up and receded. (Day 63) I’m seeing what look like seed pods starting to form in some of the main colas on my picture perfect pheno. #7 is showing 3 or 4 little bananas too. All of the top buds are definitely done so I’m going to harvest as soon as the lights come on tomorrow. I’m going to give one last watering right now and then harvest. I’ve noticed that harvesting a watered plant will extend the dry time by a few days and that’s exactly what I’m looking for. A nice slow dry. Plants are being full plant hung + dry trimmed and tent is being kept at 60-65 degrees and 60-65% RH. Cutting everything down was a pain in the ass. I had to individually cut each square the scrog net so it wouldn’t contract and squish all the buds. I chopped down my other tent as well so I have no other plants in flower right now.

4th week of vegetation. probably last week. Plant looking good. Today I received my luxmeter. Honestly I'm in shock 😳. it shows 50,000 Lux under my lamp. If you want to better understand this number -the power of daylight on my window is about 2000 Lux.😎 27 oct - remove rubber bands. add electrical wire. She is very strong. 29 oct - +6cm horizontal growth. total width 18cm 31 oct - cut several fan leaves. total width 22cm (+4 cm for 2 days). tomorrow starting 5th week, so i planning to start pre-flowering week.

New week starts. ______________ 🌞17.05 I've changed my lights: took off one 100 watt lamp and installed 50 watt red one. Looks like leaf erosion stopped spreading after the last 'extra phosphorus' watering I made yesterday. Now I'll wait till the end of this week to make huge defoliation I planned. Also, I think about second SCROG installing. Frash water spraying today. 🌞18.05 I didn't do a thing. 🌞19.05 Spraying with a frash water. And that's all for today. 🌞20.05 Growing. Defoliation is near. 🌞21.05 I made 'Schwazzing' (huge defoliation) today. It's a first time I do it. Now I'll wait for a few days before watering my plants and see how it goes. Sprayed them with a clean demineralised water. 🌞22.05 Healing. Day ONE. 🌞23.05 Healing.Day TWO. ___________ Week ends.

Nervous and excited as it's my first grow. 1700hrs on the 1st I put them both in separate glasses and used bottled/spring water. PH was over 7.3 so I Ph'd it down to 6.4/5. Both have sunk to bottom of glasses by morning. All good so far. Still deciding whether to go paper towel next or wait and go straight into coco coir. Bit of a trial run about to go down 🤣. I feel like even with all the best equipment in the world, without some sound knowledge and some commitment and dedication youl still pull a shitty grow. Wish me luck..... Quick update! Once they dropped I decided to put them in their coco perlite mix, was advised by a gro shop dude to pop them in the mix now that they've dropped in a glass of water he said they'll be sweet 🤞🙏. Please dude 🤣🤣🤣🤣. He also said to get some canna A+B put through the mix beforehand as coco got no nutes and itl do the seedlings good. So I've gone on his advice but minimal amounts. Popped about 8ml of both in 2l of tap water, could have been 5,6, or 7ml aswell tbf only by eye. So got home and sorted that. Soil seems moist enough but not soaked. Now there potted I'm just hoping and praying for some good old smoke🤞🤞🤞🤟👊👊. Il keep the updates coming. Any feedback always welcome I'm not a dick. Don't be a dick either. Peace!..... Update.... they broke soil on the 5th. So yeah both good seeds. Checked them at lunch time, both have first leaves now aswell and look healthy. Lights on baby let's play!

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Senesence in progress, but not yet ready for harvest, Harvest next week ! Continue flushing, 💪 Not too much work, just removed some leaves. 💧 Give water each 2/3 day 1.5 l Water + Flash Cleaner PH @6 RQS - Easy Bloom Booster Tabs 1 tabs/5 l RQS - Easy Grow Booster Tabs 1 tabs/5 l RQS - Easy Micronutrients Plus 1 tabs/5 l (1 watering each 10 days.) 💡Mars Hydro - FC 3000 50% 50 cm. Mars Hydro Fan kit Setting 7 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller RQS - Titan F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/624-titan-f1.html

Im feeding her steadily at around 825ppm every morning monitoring any possible deficiencies. I did defoliate quite a few leaves from the to[ and bottom once I felt that she is thriving happy and growing more vigorously during the stretch. I raised the light a full 2 feet. during week 1 and now at the end of week 2 the tallest stalk is about 14 inches while most are around 20. reason for a few stalks being taller is because of what happened when our 3rd plant ended up being a male during the transition to 12/12. Im not gna try anything crazy to try and fix it. Obviously there are no problems so dont fix whats not broken I guess. Have a great week !

🍉💦💧🌊

This plants have developed beautiful branches that will develop awesome fat nuggets for sure! Really nice strain to grow, would be awesome to apply lst some time on this strain, I have applied a selective defoliation on them, let's see how this ladies keep developing, I start to count the days of flower on April 10th!