All help is welcome first time grower :)

Plant is growing well. First 2 sets of leaves had deformities so had me worrying but another growmies from here told me totally normal for first set of leaves today I have started using biobizz bio grow feed following the feed chart of 2ml per litre of water the only thing I am struggling is how much should I water my plant currently watering 100ml - 170ml. Per 5 days But other than that she seems to be growing nice and healthy. And strong I was advised to tilt my fan towards my plants a little to help with oxygen and to help stiffen stems ! So I have done that I am wondering when I should start low stress her And is she the right size for her age

Активно все

Northern lights has been doing great. She has started to show maturity signs in last few days. I did the video on it for the week. She was moved into the small Spider Farmer tent I have under the SE3000. I will veg her for about a week, and let her get use to any spectrum changes. I will likely flip her to flowering next update if she has little to no issues. I feed her about once a week. She get water almost daily as she has been drinking a lot. I still have not had run off during watering. I have fed super light as more of a supplement to the soil when I have given feed. On her next feed I will aim for run off. As I wish to test it for ph and the tds. I already know I have a little salt build up, but it has not become a major issue yet with light feeds. Everything is looking great and hopefully continues. Thank you Medic Grow, Spider Farmer, Pro-mix, and Divine Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

I don't plan on doing any topping. Just all low stress training. I think I'll do some topping on my next grow round and compare the 2 grows.

Germination date 🌱 02/12/2021 Day 73 16/02/2022 Strain 🍁 Barneys Farm Biscotti Mintz (Biscotti x Mintz) THC% • 30% 🤤 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids 🇩🇪 ⭐⭐⭐⭐⭐ Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 2wks at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml 12days before flower until wk1 Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics https://greenbuzzliquids.com/ PROMO CODE • organicnature420 15% off ✌️🏼 🥥 Growing Media • Coco Coir Notes 📝 Super exited about these girls. Terp levels are crazy and this is going to make some seriously nice bubble hash from the trim. My growing game is getting better each grow 👊🏻 Discount codes in bio for Mars and GreenBuzzLiquids 👍🏻 game changers 🏆

This has got to be one of the best Plants i have ever grown. The Taste and Sweet smell is like A Starburst . Cherry , ice cream . Buzz is Smooth And very high but mellow . 10/10 👌

Die Buds zu trimmen war überhaupt keine Arbeit die wenigen Blätter zwischen den Blüten sind Harzig und entferne ich wenn sie trocken sind. Die Terpene sind zu ende hin extrem gassy geworden das es schon Chemisch Süß riecht ! Freue mich schon soooo aufs verkosten

A Planta reagiu super bem ao LST desenvolveu muitos galhos que estao botando botões, galhos forte e.grossos para alimentar belas flores . Esta com uma boa altura devido a predominância sativa.

Noticed some slight yellowing and the white blemishes on a couple of the older plant's leaves were getting bigger. I believed the white blemishes were do to a cal-mag deficiency and added that to my feed. Also was using 1/4 nute strength and now bumped up to full to counter the yellowing. Started LST this week too.

It’s crazy the amount of growth they’ve had the past few days and this is where I started to question if I waited too long and if I’m going to have enough space. They’ve been very healthy and growing vigorously.

Week 6 has brought about the slowing of vertical growth and the flowers starting to put on some bulk. Each time I have run this cut the top leaves will start to come in lighter than the fan leaves below. At week 6, so far they are maintaining a lime green color with some discoloration. This is not a cause for concern. Flower formation is on track and everything else looks healthy. I basically have to ride with whatever happens because I use the BeanStalk line of products for fertilization. They are a single application, controlled release formula that feed the plant over the course of approximately 90 days. This means that I never have to mix nutes. Water only and I set it and forget it. I mix in a known quantity of the product at transplant and that’s it. I highly recommend this product to anyone who is interested in simplifying their grow. The upfront cost is a little steep, but I purchased 3 pound bags of all 4 products in February 2021 and still have a ton of it left. Last time I grew this cut, I observed many of the ‘sugar leaves’ turning yellow and dying prior to harvest. That plant was grown in a 5 gallon pot, with a much longer veg time, much more vegetative mass, and was much closer to my lights. I am hoping to get different results in a smaller pot with shorter veg time and less leaf growth. When I harvested that plant, I noticed that on most flowers this was not a big issue, but over time I have found that when sugar leaves die on the plant, this is the most likely avenue for mold to develop in my room.

Tip of the day: Never let an AI try to set nutrient ratios. The plant on the left is yellowing significantly compared to its neighbor, even though they are both on the same feed. Nutrient rates have since been readjusted to try to help the yellowing plant. I may lose some yield, but hopefully, she pushes through. There are five weeks left until the first yield in nearly two years, with another run right behind it: two clones of the same strain, which will complete the perpetual winter cycle. That will be a wrap until October of 2026. Happy growing, everyone!

One plant had a big stretch late this week. But I believe it was due to me placing the middle plant in the back right because my middle light is an older model without bloom switch. And I wanted the nicer plant under the red leds, but over night that next night, it grew like 4 inches above my canopy :/ but i think I'm going to tie the 2 middle stretchers on her to the middle opposing stalks. I started the besties because the buds are formed nicely on top so now I want to start giving some size focused mid bloom nutrients. Going by the schedual so far for flower on my nutrient chart. Oh and when I started using the bud candy I noticed some AMAZING smells that I've never smelt on a strain before. The new tricomes smell like a cotton candy/gummyworm, and the water leaves when cut off smelt like straight gas/diesel. But the 2 smells are not present together. Its weird. Forgot cal mag this week

My tent is so packed! I had no idea it was going to be such a beast. The smell is becoming super strong.

6/24/25 Very stanky and gassy but not fuel. its got a very nice smell to it. Shes fading a little earlier than normal. but shes plumping very nicely. ill need to use a scrog or something else in the future to keep these thin branched top heavy nugs upright. shes leaning all the time from this way to that way. i have landscape staples placed in a triangle basically around the main stalk to keep it from deciding to lean a different way once I stake it

Had some sunset sherbert left over from last year so I have more than usual with this plant going put half outside in the ground and the other half to flower in the tent going attempt to take cuttings of one plant

For this week, since its second week of bloom, will give it a P boost to the 1st gen mother to make sure she knows it's time to switch gears and flower. So taking out Flora Bloom and added dry Koolbloom which is 1-42-22 450PPM and also added 100 PPM of Flora Grow and 100 of CaMg for my main macro/supplement. Will be doing silica every other week and Hydro guard every week (since I found brown slime) Will resume with Flora Bloom next week. Been only doing Hydro for cloning and vegging so its my first time encountering brown Slime. Anyone know how I can get rid of it? What I know... - Need to lower PH to closer to 5-5.5 from 6.0 - Added Hydro Guard to fight slim - Minimize Air Stone duration - Been having it on pretty long because I have one large pump and I use it to brew Compost tea for my organic grow. - Need to minimize light penetration to resi - I have a perforated plastic cover laying around the house and I have been using that to cover the resi and sometime I even forget to put it on. Anything else? I run totally chemical nutes from GH Flora Series. And I have been sharing the PH and PPM meter with my organic nuets which I brew for 36 hours before use. Maybe some of that got contaminated thru that? Cause I have been using the same bucket system (without res) to raise my mothers for almost 7 months already and never encounter any slim before. I think I finally understand what tops are LOL: So please correct me if I am wrong... What I understand: - All tops large or small will "stretch" at the first weeks of flowering - Most of the "stretch" only occurs at the tops - The "stretch" will determine the length of that bud - The "stretch" should be as high as possible BUT with short distances between the NEW internodes that develop during that period. for a large and dense bud. - Don't get confused with stretch that cannabis experience under low light. Happy Grower Brothers and Sisters BM 4TwenTee

Tuesday February 28th I dropped 5 Exotic Genetix “Yikes” in ph’d to 6 water. After 8 hours they’ll go into paper towels. Eventually ending up in rockwool. This is my first time running a RDWC system. I have to thank @budz_alot for helping me get this all together!!!

Hello and welcome to another week of bulking of my Gorilla Cookies Auto by FastBuds. Her buds are exploding with a fresh fruity and earthy aromas, and her buds ain't getting smaller. Every budsite has a bud that is almost as big as a ping pong ball, they are very compact and reek of resin. This week i also added another layer of sand, because the fungus knats didn't seem to stop, but now with 1cm of sand it seems realtively peaceful now. As she is nearing the end i want to give her a good 2-week-finish, by supporting it with finalpart. I prepared her by flushing her with FlashClean beforehand so the soil gets reset so finalpart can take full effect. Also i lowered the light to give the lady more power. Tomorrow as of day 73 the Controller to my AW400 by Vivosun is arriving, and i will be using that for the last weeks of the Gorilla Cookies, and will be starting the next grow with the AW400 as the main light There is nothing much to do, just watering her with her nutes, and waiting until she is done. Very good, Thats it for this week, i hope you enjoyed it, this is going to be one of the last updates of her.