We planted a second Jack Herer Auto from Quebec Cannabis Seeds in a 1 gallon pot as an experiment to see how it does compared to our jack herer auto in the 3 gallon pot. We wanted to see which plant would give us the best yield for the space available. This will help us decide how we want to do our next few rounds of grows and if we want a SOG or just have a few big plants in the tent.

Still working on my canopy. I did some defoliation in order to encourage growth at the bud sites and improve circulation. I have 3-4 weeks until her sister is mature enough to flower. I took a gamble and germinated another seed two weeks ago because the one I originally planted with her turned out to be male. I hope it will be mature enough to produce a decent yield. Even though it will only have been growing for 4 weeks. By that time I expect most of the bud sites on the older plant to have grown through the trellis, and I should have a nice even canopy. The second plant will just be grown as is with very little training. I don't want to slow its growth at all.

Fastbuds seeds Gorilla zkittles auto Only using spring water for first week and spraying with foop mist. Going to use foop nutrients with Humboldts secret cal/mag and nectar for the gods ph up and down! Planted right into substrate. I’m using Mother Earth coco coir/perlite mix with hydroton at bottom of pot

Room continues to pump out growth. HEat and humidity were an issue this week, but was managed with multiple garden visits and some air diversion. Extremely impresed with all genetics in the garden and there has not been any growth issues to date. 5 weeks complete, another 5 more to smoke. Thanks for following. See GreenMachine's diaries to see how to really grow In House Genetics

Forgot to record last week (due to being too high) but here’s week 4 they seem to be doing great😄.

Day 52, stacking beautifully. Got her last kelp potassium boost today. I’m thinking another feed of a Green rush beefy bud on day 56 before starting to flush/ripen. It should be finishing off that 70/30 Gaia feed I gave a month ago. Very eager to smoke some of this medicine. LEMONS! Slowed down to drinking 3L of water every two days again. I ended up cutting all nutrients out for a ripening. I never went back with a Green rush feed. Im positive there is very little gaia breaking down in the soil if any ! Cloudy trichomes happened this week too ! very eager. Ill be adding a final week photos plus hanging and wet weight photos in a week or two and then in a month you can come back and see what final product and weight looks like with a smoke review!! thanks for making it this far ! i appreciate you guys checking on my progress ! Heres a youtube short i created ! i will do one for every grow just to add to my portfolio! Im hoping by keeping up with all this and show casing my progress, i could potentially find employment in the future under a grower ! https://www.youtube.com/watch?v=lhQWMl7kjLg&lc=UgwRIkWLHVSlsOJWXlx4AaABAg&ab_channel=Apothecaries youtube video is from day 59 or so Thanks again !

I top dressed with worm castings and Dr. Earth’s Flower Girl. Also, the reservoirs in my DWCs got a water change to switch to transition stage nutrients.Growth is really accelerating.

This week went real great, 2 ogreberrys and Bruce banner got trimmed up an jarred ! We chopped the 3 other Ogreberrys on Sunday the 14th , they will hang out to dry for 14 days ! Stay tuned for next update! More trimming an weight an overall photos! Cheers to y’all 😶‍🌫️💨💨💨💨

Cash Express 03.01.2025 Tag 36 / 11.02.2025 Die 5. Wochen ist erreicht ! Die zwei Pflanzen haben alles gut überstanden, in der Zwischenzeit habe ich die Cash Express in ein größeren Topf gesetz. Nach meiner Beurteilung haben sie eine gesunde Höhe und Breite erreicht, man erkennt gut wo später die Blüten entstehen. Ich nehme gerne Ratschläge von der Community an.

Fade colors are really starting to push through Fed with nutrients: 5/7/25 Fed with ph water at 6.5 : 5/11/25 Fed with nutrients 5/12/25

Starting 5th week of flowering. Buds are growing nicely. I increased the neutrients from 3/4 to a gallon to 1 teaspoon per gallon. They are fed every 3rd watering . They each get a gallon of water every 2 days ph balanced twice a week and fed once a week.

Day 8-19/12/21 all the chemdawg are looking great!!! Day 10-21/12/21 all chemdawg are looking great!!!! Day 13-24/12/21 still looking healthy!!!

Jipp

i think pistills are changing more oranger this week.. but i guess buds are not growing fat this week .. something isn't right...

Semanas finales 🚀

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

😍😋😲

July 5 - The girls are still doing awesome. temps are between 21-26. Humidity is 40-50. Still feeding every 24-36 hours with 3L per plant. July 6 - They are doing good. Showing lots of flower sites now. Unfortunately I did not get any pictures today. July 7 - Tons of progress since last week. I don't see any signs of any problems, and still no pests! The smell is getting A lot stronger as it starts to flower more July 8 - Still doing there thing, no problems, temps and humidity is fine. Have been feeding every 24 hours now as they seem to be really thirsty July 9 - Super happy with how they are doing. No issues yet. Smell is heavier, and tons of bud sites showing up. Only issue is they are growing pretty uneven. July 10 - Time to get a even canopy! First time doing some HST. I also did some defoliation. One of the stems split open a bit but it seems to be doing just fine. I did he HST and defoliation in the morning, i then took pictures of 12 hours later and everything seems just fine! July 11 - Everything seems to be a lot more even and the broken stem doesn't seem to affect the growth.