Huge dongs on the remaining amnesias she’s fading yellow and falling all over the place I could cut her now with 20% amber but I’m inclined to wait a little bit longer to induce a little couchlock! The strain doesn’t hit very hard at all but when made into hash or rosin the strain has great flavour profile and comes out very blonde

-Buds are getting bigger by the day -i am now fertilizing almost every day (they seem to like it) -i rubbed on the leafs and the terps are already crazy Happy for any comment :)

In this week I can easily recognise the positive impact on the growth of moving the plants to the bigger pots, they increased the growth rate so much. #1 is 55cm tall (21+ inches), it still displays 9 pointed leaves above the internode where it started as reported in previous week diary page #2 is 54cm tall (21 inches), it displays couple leaves with 8 points and one or 2 new leaves seems to have 9 as well, I will confirm once they grow more #3 is 34cm tall (13 inches), this is the one that got problem in beginning (read previous page for more details), it is doing its best to recover and get to the same level of the other 2. I see only max 7 pointed leaves so far. Please share with me your thoughts about it, here's a n00b that likes to learn!

I flushed 2 times and cut back on Nutrients

SPONSORED DIARY===SPONSORED DIARY===SPONSORED DIARY This is my diary entry into the Dynomyco Show Us What You Got Contest! #DynomycoShowUsWhatYouGot! @DynomycoShowUsWhatYouGot! Big Shoutout to @Dynomyco for picking me in their contest. Happy to be involved and as a user of Dynomyco I am curious to see this side by side with my own eyes. I will be honest I am a little skeptical it will show any major differences. but we will see what happens. Some disclaimers, I am still using LABS serum I made as well as MIIM Miicrobial Mass. These are also beneficial to the root mass however they are bacteria based and not fungal or mycorrhizae like Dynomyco. https://growdiaries.com/giveaways/DYNOMYCO_Show_Us_What_You_Got I was going to use my own clones I made from the g13 labs grows I just finished but released I had used a Dynomyco in the medium when I was rooting them for a extra strong start. So to fix this little error I went out and purchased two Cherry Pie clones from a local grey market dispensary. I joked Dynomyco will cover the cost and yet to hear back from them lol. I have inoculated one clones rootball and the transplant medium with Dynomyco, the other clone and its medium got no Dynomyco. The Dynomyco Clone is on the left in photos, it's also the only pot with a mini glass thermometer. I did this exact thing in my Dr Seeds Granddaddy Purple Diary vs 60day wonder. I don't expect it to count as an entry but more of a 2nd side by side on two different strains. GDP vs 60DW. Hopefully I will get some stickers in my package and can label the pots as such. I used my own personal stash of Dynomyco as I have not been shipped the contest materials yet but the clones where good to go an I wanted to get this beast on the way. The plants will be grown outdoors and transplanted at min 2 times max 3 times. Nursery pot to 1Gal, "this weekly entry" 1Gal to 2Gal, "3-4 weeks away" and finally 2Gal to 3Gal maybe. "6-8 weeks away" This week 1 entry is the first transplant from nursery pot to 1Gal, I have sheltered them inside for the first few days as we got heavy rainfalls and I did not what that to be to much of a shock for them, they are in my Spider Farmer tent under 24/0 lighting with the SF1000 @60%, they should be good to make their way outside tomorrow if the weathers good. I have noticed I have a lot of outside light interference on my balcony with all the safety lights in the surrounding areas buildings. I am going to try and LST these plants to keep them low and below my balconies wall to avoid excess light pollution. about 3 feet high.

Sky Walker ~~~~~INDOOR~~~~~ DAY 141 Above Dirt 💬SUNDAY 01.13.24 - So this is the update that I did not have time to do over the weekend, the girls are bouncing back from the hard time I put them through last week, and the flowers are starting to chunk up along with more foliage, however, there will be no more defoliation until we are close to completion, for now, its just water, and wait, allowing the Gaia Green to do its thing, the light is at 100% and the girls love it. ~~~~~~~~~~~~~~~ 🌱Sky Walker 👨‍🌾🏽Sativa Jones 🌤️@Medicgrow420 SeedBank Seeds 📝@gaiagreenorganics 📝Bokashi Biochar ~~~~~~~~~~~~~~~ 📝 Skywalker OG Strain is a top-shelf Indica dominant hybrid. It is a cross of Original Amsterdam Blueberry, OG Kush, and the indica strain Mazar from Afghanistan, and is best known for its super potent effects and sky-high THC levels.

You are an outdoor grower ? You'r waiting until the middle of may to bring your plants to your secret spot and wait until September to get a good crop?? Then this strain is for you ! You will have the possibility to harvest up to 3 times before your feminised will be ready and you'll be stocked by the final product ! Only you will be able to know that it is an auto strain, none of your friends will notice

First of all, I let the seeds soak in water for 10 hrs and I used the paper towel method for germination.

Alright, as you guys can see, she has been topped and she has been mainlined... i have a while to keep her in veg due to an auto flower, not being an auto flower, so now I have to wait for that that plants flowering to be done before I can transition this one into flower so I figured I would take my time and get some training on her .. God bless everybody have a great week 🙏

Another week another diary we are keeping busy in these difficult times spending some extra time with our ladies and we also started a new diary we really appreciate if you can check it out and give us a like as for these ladies we added hy-pro Generator to the mix this is a new hy-pro additive which helps with maximum growth, protection against stress, strengthens the immune system and leaves no residue in the water again we are amazed with the quality of the hy-seeds, the plants look really great and the flower development is off the charts the combination of hy-seeds and the hy-pro nutrients created a winning team we removed the bottom 30% of the leaves and twigs so that the plants does not put effort in the little flowers that get trown away anyway that was basically it for this week Talk soon Stay safe, stay green Cheers, Nibameca

2nd topped on day 20 and she is reacted well to HST, she is too busy with growing, there is no time to get stunted. I give her 1/3 of the feed schedule’s recommendation. Soon I will switch to bottom feed. DLI has been set to 30. Day 26 - today I installed the Megapot system. She has been transplanted from a 5 gal bag to a 6 gal one, it was quite a torture I must say. More stress for the plant. I had to do this for the better drainage. Was it a stupid move? We shall see.

Primera semana de floración y a medida que crecen los brotes los voy pasando bajo la malla tratando de dejar los brazos más altos en las orillas, se ha regado foliarmente con delta 9 el cual se dio en dosis baja al sustrato al comenzar fotoperiodo de floración.

Estamos en la última semana para dos de las cuatro variedades, así que a partir de este momento, eliminamos Bio Flores. Añadiremos al bidón de riego Canna Flush, que nos va a ayudar a lavar bien nuestras raíces, eliminando restos de sales y nutrientes. Buscamos que las plantas gasten sus reservas de las hojas, que poco a poco veremos como pierden verdor, eliminando clorofila, sobre todo las más bajas. Canna Flush - 20ml por cada 10 litros de agua. Bajamos la potencia de nuestros balastros a 600w.

Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room.With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation.But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.

Pure distilled h20 for her last week ..It got pretty chunky over the last two weeks.

Flipping to flower after this week and taking clones. Steady growth rate and they are getting smelly lol which is always a good sign before flower.