July 23rd: Day 10 into Flip Temperature: [Day 75-80°F/Night 74 - 78°F] Humidity: [45-55%] Weekly Comments: - light reshaping and defol. before stretch stops - both plants are forming flowers, broke on decent top right off kinda pissed Updates:

Permanent Bluez is well into flower now , smelling sweet and starting to get sticky. Love the shape she’s taking , multiple bud sites all looking healthy and chunky . I’ll keep tightening the tie wire and giving her room to chunk up as she naturally wants to . Sit back and enjoy the ride over the next month or so .

I gave them a root wash; I will continue watering with plain water until the end with a pH of 6.5, some waterings with 1L and others with 1.5L... everything is wonderful.👌

Hello ,friends!!!! My RUNTZ continues to bloom. Earthy smell with hints of mint and hashish. I water in the same way: every day to prevent salting. I wrote earlier that this plant at the start showed the hay very well, but then it was stagnant in growth, the plant stopped drinking and eating until I washed it with clean water. This time I missed a week. :( Never mind, I'll give this sort one more chance. I added some more extra food from GNHE and HESI

Not much to say about this real first grow week’s start. Everything looks ok, steady growth at 40% light. I had to restart the control app a few times, therefore the broken graphs. At night times, the control software tries to attain optimum humidity rather than optimum VPD. That’s why VPD is dropping when the lights are out. CO2 is back to baseline – really wonder what the reliable values are … I found I have to silence the blowers when a timelapse photo is being taken. The shaking you see at the beginning of the grow video should not appear, or to a much less degree, in the future. Day 13 (July 30th) shows good, steady growth. Leaves are a bit spotty, although less then the processed images show. Something to be worried about? I would not currently … All are developing their 3rd nodes now. The controlling Raspberry Pi crashed last night when I tried to access it remotely … ;( – looks like the Connect software is in need of an update. The leaf temperature sensor is now really aimed at lady-to-be nr. 1’s leaves. Nothing to change that I see. I won’t cut the top yet, just watered the outer circle of the big pots slightly to encourage root growth. Day 14: Nice growth. First plant is now at 11 cm, and at 12 cm on day 15. Nothing special to report so far, except for I had to move the internal camera a bit upwards to keep little lady #1 in focus. Day 16 and last day of this week (Aug 2nd): The young ladies are now at about 14 cm tall. Growth looks very compact though. I think the two inside girls will lose their heads next week; I’d still prefer to have one or two more nodes available. Pictures of this day are taken at the end of the plants’ day. Notice their leaves are pointing upwards, which should be a sign that they want more light. I turned the lights up by another 20% for a total of 60 W now. Weather was pretty hot the last days so it wasn’t possible to stay in optimum VPD range but as long as growth is this satisfying I don’t mind. I will water them slightly at their next day start. Outside plant’s soil humidity might still be at around 58% officially, but drying starts at around 40% with this measurement and the sensors are placed quite closely to the stems so outer soil is dryer. I am preparing the plant water with some additions and a frequency imprint suing some Solfeggio and Schumann frequencies.

————————————————————— WEEK 9 / DAY 58-64 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 40cm Schedule: 18/6; PPFD: 1050-1150umol/m2/s 19° C - 45 RH 1L per Plant PH 6,5-7 4ml BioGrow; 4ml TopMax ; 4ml BioBloom 1ml CalMag #1 Royal Critical Automatic #2 Royal Critical Automatic Fan, extractor and pump ON 24/0. ————————————————————— -17.03.2025 The fourth week of flowering begins. Everything is going great, so far there have been no complications. From this week onwards, the quantity of BioGrow, BioBloom and TopMax is increased to 4ml/1L. The lamp is also turned up, the measured value with the PhotoneApp is 1050-1150. -19.03.2025 Both plants were watered with 1.5 liters of water with fertilizer each. In addition, an extra fan is now running for better air circulation. -23.03.2025 The next week is coming to an end. The plants look good, the buds are growing and getting nice and frosty. I think the week after next will be the time to harvest the ladies. Both plants were watered the last time with 1.5 liters of water and fertilizer mix. From next week only clear water.

Finally the final chapter of the Big cheese twins chronicles!! Those twins were not identical at all and they had diff. pots too I will show you the diff: 5lPot: 151.98G wet harvest 28.42G cuttings and buds for oil. She was not that big (50 cm) but her buds were fat as fu*k! did not have big colas with flower but all the buds were fat, shiny and full with trich.😎 i can even use some of the big leaves for oil..👌 i love the smell, only in early stage of flower they were a bit skanky but later on the smell became more flowery and herby 😋 had a lot of pests and bad weather and did not get a lot of daylight.. But still she couldnt get cheddar than this!😁 you fetta believe it! (😳yeah im feeling very cheesy 2day) 11L pot: 75,45G ~75,45G for oil she was a freak with very strange leaves, i almost wanted to teminate her..but i gave her a chance..😎👊 she grew tall and was foxtailing all the way (very sexy 😁) So the buds were not so big or fat but very white, filled with trichomes! so maybe i will make oil with all of this (i made a diary about that if you are interested) i will see how she dries 👍 Must also not forget they were in my fridge for almost 2 years, waiting... So thats why im just happy they even wanted to grow! 🙌 Thankyou all for following the adventures of the BIG CHIEF-twins they grew healthy thanks to all of you! 😇 Happy growing for all ✊

I used a macro lens from a fish eye kit you can buy for any phone to make that macro video, i highly recommend them it’s so easy to see when i can harvest , these are also very cheap but you do need a steady hand haha. I smoked some smaller buds about a week after harvest & it already tastes amazing almost like a reaalllyy sweet banana haha & the burn is good also i was suprised it was smokeable so fast. Fat banana is one of my favourite strains from now on! I also had 1 Sour Diesel in the tent but i’m still curing that one

.

Mass cloning! Not sure how many are going in the greenhouse yet but I will just give away any I don't use.

Hey guys . A wonderful week goes by with a super growth :-). After I topped it for the first time last week, it recovered very quickly and showed great growth. I don't think I will use topping again on the lady because I should slowly blossom with a few other women :-) think it will be ready in the next 7-14 days for Flowering 👍. This week it was poured 3 times with 1 l each time (for nutrients, see table above). The tent was cleaned and the health of all women was checked :-). After the photos she was sprayed again with neem oil so that the last little tripse disappeared. Even if you can't see any more trips I will spray it one last time next week to make sure :-). I wish you all a happy new year 2022 ☺️. Stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/hippie-therapy-cbd Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

After i topped the plant i didnt feed her right away. I let her recover. 06/05/2023 - Day 24 i finally watered the plant with nutrients. 07/05/2023 - This day has been awesome. At the end of the day i have noticed 2 new sprouts! One on top and other at the very bottom, below the coityledons! I will start LST soon so these new sprouts get light and start growing! I start to think it will be a challenge get this plants branches equally spread, but i´ll go for it anyway. 08/05/2023 - Day 26 i started with the LST. Just fixed main branch and bent it pointing to where the sun rises. This is very important when LST´ng outdoors. Always point your plants to where the sun rises so when she grows she points to the sunset. This week i added Alg-a-mic to help the plant recover from all the HST and LST. She seems to be fine and recovering fantastic. Will this be a monster Autoflower? ✌️

🌱 Kweekverslag – American Patriot (Weedseedsexpress) 📅 Week 5 – Laatste week vegetatieve fase (groei) Licht: Mars Hydro 450W LED (18/6 schema) Potten: 11 liter Medium: Potgrond Temperatuur: 24–27°C (dag), 19–21°C (nacht) Luchtvochtigheid: 50–55% Afstand lamp – planten: ±35–40 cm --- 🔍 Algemene Observaties: Hoogte: 35–45 cm Structuur: Compact maar breed door training Gezondheid: Planten zijn sterk, donkergroen blad, stevige hoofdstam Training: LST voortgezet op alle planten Laatste toppen uitgevoerd begin week --- 💧 Water & Voeding: Watergift: ±1–1.2 L per plant om de 2–3 dagen pH: 6.3 Voeding: Bio-Grow: verhoogd naar 1.5 ml/L Root Stimulator: 0.5 ml/L Drainage gecontroleerd, geen tekenen van overvoeding --- 🌿 Groei & Ontwikkeling: Nieuwe toppen ontwikkelen zich symmetrisch Zijtakken zijn krachtig → veel toekomstige bloeiplaatsen Bladoppervlak goed gevuld, maar luchtcirculatie blijft optimaal --- 🔄 Acties deze week: Laatste LST doorgevoerd voor begin bloei Diepere controle op ongedierte (alles schoon) Voorbereiding om over te schakelen naar 12/12 lichtschema eind van week 5 --- 🔮 Vooruitblik op Week 6 (start bloei): Lichtcyclus veranderen naar 12/12 Overschakelen op bloeivoeding (bijv. Bio-Bloom of vergelijkbaar) Eventueel defoliëren van onderste schaduwbladeren Nauwkeurig monitoren op stretch en bladkleur

The plants are doing well. Go on.

one plant Corn bread.. is 17 months old.. the rest are 2-two months old. first week of documentation. start of 3rd week of flowering..16th day of flowering having an insect problem. showered plants with neem oil and soap need to get rid of mites and aphids need to better the feeding regimen need to prune and re arrange plants -----as for the room i need to cut two more 6' holes in central duct to place exhausts for third and fourth flowering lights and carbon filters. hook up portable a/c in storage room..use plastic wrap to seal in room .. exhaust heat from a/c out of seconadry window and make n intake from the bottom of the wall with the doorplace air filter over hole...collect water from a/c dripping

A good week's growth, they are drinking more and I've started to feed, and I think they enjoyed the nutes as they clearly stretched over this last 24 hours.

I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone