Likes
Comments
Share
No surprises. Topping has been done at this point. Temperature and humidity controlled as much as possible. Some bending and light intensity increase. A 2x4 tent is actually too small to bring two plants to the height and spread that I would have liked. Ideal for one plant. Targeted not to have these 2 tent plants grow higher than 36” to avoid overcrowding.
Likes
11
Share
@DimJesus
Follow
Saludos 🙌 completando la novena semana y tercera semana de floración. Las variaciones de temperatura continúan pero ella es ya de acostumbró, la humedad está actualmente en 80% y varía bastante también. La altura del panel led continúa la misma en relación a la semana pasada pero ahora la distancia hasta la planta se redujo a 4-5cm del cogollo más alto, el cual está sin main-lining. Buenos humos 🍃
Likes
7
Share
10/31/2022: Happy Halloween!! 🎃 Not much to update today. Just installed my scrog net the other day, but I'm thinking I may need to lower it. I'm going to wait and see how much stretch I get this week. Plants were all watered yesterday and are still wet enough. Light is turned up to 100% at this point, but raised it a bit more. At 18 hours of light my average DLI is about 45, which is as high as I will take these. 11/3/2022: Did a heavy watering for all 3 plants today, since they are all still stretching. About 2 liters per plant, using the Coconut Water Powder and Bio-Phos. Ph was 6.7. Also did a bit more defoliation on the Newberry and Orange Bubblegum. All plants are looking great. I think raising the light helped with the slight droop the Newberry had. They are starting to smell now too. When I open the tent, the whole house smells. Love it, haha! 11/5/2022: light watering today with the coconut water and Fish Shit. The Newberry and Orange Bubblegum continue to stretch and the Strawberry Gushers appears to have finished it's stretch and the flowers are beginning to get larger. All 3 plants look really healthy and have no problems at all. Also, most of the fungas nats seem to be gone. I'm assuming the predator mites in the BuildAFlower ate most of the fungas nat larvae. Only issue is the plants did not stretch as much as I expected, so my scrog net is a little high, but I'm just going to leave it. Avg. VPD:1.1 PPFD: 700 DLI: 45
Likes
6
Share
Larry und ak wachsen gut, die Autos unterscheiden sich etwas in der Wuchsgeschwindigkeit, obwohl gleicher Boden, Wasser zu und genetik 🤷
Likes
9
Share
@Jake13255
Follow
Gonna get the dry weight after they’re done drying and curing. Also more bud pics
Likes
1
Share
I put the clones into bigger Pots once their roots were fully established. Immediately started LST and put in the clones at an angle so that light is distributed more evenly. Autos also growing well but Panty Punch is lacking because of crippled leaves. I still let her live to see how she develops. I plan to bend the clones in a circular shape so they grow into an even canopy.
Likes
49
Share
@AsNoriu
Follow
Day 77. Harvest day for that amazing plant. Dry trim chosen. Will update after drying. Thank You Zamnesia for that chance ! Day 86. Girls has started curing process. Happy Growing !!!
Processing
Likes
10
Share
@KcKush
Follow
*Increased Ppm from 750 to 800 *1st week of flowering actually Tomorrow is :D *has a lot of purple on the stem I wonder if that’s genetics or something.
Likes
33
Share
Super ! Starts flowering 🌳
Likes
7
Share
Removed the 1st nodes to divert energy into growth and future air flow also LTS 2nd & 3rd nodes
Likes
6
Share
Time to harvest or leave for longer. Maybe a few more days? Should I water on not now or just wait? Soil is dry. Please let me know your thoughts!
Likes
59
Share
@Hashy
Follow
Grow diary 11 Stage 2 Days 11-20 The light schedule was altered to 19/5 on day 11 and the 6 inch distance was maintained until she went into the main tent. Lights on 7pm off 2pm Day 12 was the 1st time she was watered/fed since day 6 when it was soaked for transplant. After day 12 she was fed 300ml every day and the run off checked to make sure everything was in range. Day 17 she was topped after the 2nd set of nodes. I'm thinking of removing the lowest set of nodes in a few days and doing a small mainlining project, Day 18 she was moved into my new main tent (gorilla shorty gt225). The light is my mars hydro TS1000 set at 50% power 20 inch above the canopy. The wilma system is just hydroton/clay balls, and the feeds are on at 8pm for 15mins and on at 12.30pm for 15mins. Day 20 she seems to be adjusting to the topping and the transplant. I'm happy with how the last 9/10 days have gone, its still been mega hot and i have managed to battle the heat quite well so the plants haven't suffered. At the moment all 4 strains are at about the same point in growth. Temp Max 27.8c Avg 23.8c Min 19.4c Humid Max 69.5% Avg 55.7% Min 45.4% VPD Max 1.98 Avg 1.32 Min 0.71 Hope to be back in 10 days without hitting any problems.
Likes
15
Share
Tag 4 der Trocknung Heute habe ich die Fächerblätter entfernt
Likes
5
Share
5/2 she's finally tall enough to spread out and she's looking so fucking good. She's showing sex but I don't think its flowering 5/31 the main stem of this plant is crazy. The branching is abnormal and I can't wait to see what it does.
Likes
8
Share
@CalGonJim
Follow
2/16, 10:28 AM. I got a little distracted with my vegetable garden and some more movie props looks cool though. 2/17 9:34 AM. My EC was high on these plants so I took it down. to about 1200 on banana and I’ll try and get a lower on OG triploid she’s just great. I used water with EC at about 970 going in and I used a whole gallon on each until the EC coming out was 1280 on BPP and still 1700 on OG triploid. Responding very well right now. I did it about an hour ago and the resin on OG.Triploid is just incredible and banana purple punch RF3 by fast buds. She’s throwing out very thick pistil formation much more than I usually see. She’s still behaving like a flower and 7 to 8 week a lot of pistils formation lotta flower growth she is not slowed down and the flush today darted her growing again.👍
Likes
5
Share
@MyStery21
Follow
Same as her sister, Compost tea for the first time, hope she gets better.
Likes
5
Share
4/3 to 4/9 Veg Days 7 to 13 Week 1 Not much to talk about here. They took to the soil as expected with no issues. One plant's 6 day advantage is really showing here tho. Think I will have to dub that one as "P1" simply because of the timing of root start. Feed this week was 1.5cup & 2.5cups of 6.4ph RO (no nutes) with 4 days between and 4 days after the last feed. Both feeds produced a little runoff, so I know I got the water through well enough. Feed plan next week will increase the amounts to 2.5cup & 3cups of RO and introduce my Veg Mix concentrate. Same feed intervals of about 4 days between feeds. I still want to see the water run through, so if I need to use more than 2.5 cups I will. The idea is to water deep and through, but then make them search for more before the next feed, hopefuly spreading the roots out while doing it. Video - simple growth video since there's nothing to really do this week but watch them grow.
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.