The Grow Awards 2026 🏆
Likes
Comments
Share
Likes
25
Share
Wow look at her grow we are in the second week of her flowering stretch and she looks amazing. Smells good already omg super excited about this one ☝️🏽
Likes
17
Share
Hi! Thanks for checking out my Royal Dwarf grow! Please comment on how healthy you think the plant is or any thoughts. In less than 2 weeks I have learned so much from you guys and i want to make a point of thanking you as this medicine allows me to live what I would consider a normal day to day life! :) So... Beginning week 2 and from the first few pictures and videos I think the plant is getting healthier, Getting a ph meter this week also, will probably resolve any issues I think I'm having. Day 7/8 I was going to switch from the Vitalink Plantstart + Canna Rhizotonic schedule to Canna A, B, Rhizotonic and Cannazym. I have not gotten around to doing so yet as I think I've been overwatering the plant. stopped watering and started using the spray bottle to keep the moisture up. will water with the new nutrients once the plant has dried out a bit. Day 9: Transplanted from a 1L to a 19L/5Gallon, the top half of the 1L container was dry and had what looks like well developed roots and the bottom half was wet and the roots were hanging out when transplanting. I definitely should have let it dry out more. Day 10: Rhino pro 200/600 Carbon filter arrived and it's the 1100cfm/overpowered version as I read it was better to get a filter with a better CFM rating than what your fan can move. The fan is an Isomax 900cfm or is it m3/hr ? I added a short video after the pics so you can get a fairly good view of the setup. I got 5m acoustic ducting and connected it up as best I could with the space I had. I Was covered in rock wool, didn't have wire cutters and had to go buy some to finish the job 😅. Talk about a nightmare! I left 1mtr spare ducting for the intake fan in future grows. I think it's worth mentioning that the 6 fans on the back of my grow light are louder than the filter/ducting/fan/ducting (in order). Noise level of light and fan combo is between a really expensive/good quality bedroom fan and a hairdryer as a comparison. As I don't have my intake fan yet Im using passive intake and my fan has a 3 speed controller so I have it on speed 1 and there is negative pressure. Finally i mixed up the canna nutrients and changed ph from 7 to 6, I'm not sure what's ideal for autos but I read that anywhere between 5.8 and 6.3 is good for autos? Let me know! Day 11 (update) As I have now realised how to edit my weeks in the diary I will start doing so! Read that a fluctuating PH is good between 5.5-6.5 so I'm gonna stay at ph 6 and let it do its thing. The plant seems to like this a lot more than ph7 although it is still stressed from transplanting (1ltr-19ltr) it's still growing new leaves but growth appears slower. Finally after a few cold showers I have recovered from being covered in rock wool! (thank god😂) also I started a RQS Quick One as a backup for the dwarf and RQS Fast Eddy as Im eager to see if medical marijuana has a better effect on my depression, anxiety and sleep problems than regular high thc low cbd strains. Check out my profile (JuicyFruit) to see my diaries for these strains! Day 13- my dwarf still seems stressed from the transplant, its growing some new leaves slowly but is still drooping from transplant. gonna be a dwarf-dwarf by the sounds of it! 😆 and i was doing some research on optimal hang heights for my Phlizon "3000w" COB LED, it seems that 40 inches is good to start from. i also read another users opinion that the switch on the fixture labelled VEG&BLOOM is mixed up with the other switch that is labelled STRONGER. The VEG&BLOOM switch is LEDs along with IR. (i read that the IR is probably further stressing my transplanted dwarf) and the STRONGER switch is COBs. i took a minute to think about this but after realizing that the plants can probably handle the COBs (STRONGER) at the right distance i may aswell use them for veg and switch the LEDs and the COBs on 1 or 2 weeks before flowering for full flower power! after reading all that i went straight over and switched the LEDs off and put the COBs on. il post pictures in the morning to show how the plants reacted. fingers crossed people! Please comment on anything you think i could improve on or any advice to help this plant grow better as it is much appreciated! Peace! Day 13 Update: took some photos and it likes the COBs, although they are very hot combined with a sunny day reaching high temps of 29c. turned the fan up and opened another passive intake on the tent. finally im going to get some calmag and a oscillating fan for the leaves and hot spots in tent :)
Processing
Likes
9
Share
Transplanted blueberry clone 3 to a 5 gallon, amnesia auto 3 has had a burn spot on the leaf for a while, she is also the smallest auto, any help appreciated! Update, starting using GHE flora series nutrients. Saved blueberry clone #3 finally I do believe.
Likes
17
Share
@4chuk
Follow
Dec. 25 - Merry Christmas! Week 12 begins. Dec. 31 - I gave her 1 Litre of nutrient solution and about 500 mL spring water over the week, starting the day with a spring water flush then continued the day with nutrient solution.
Likes
5
Share
Likes
5
Share
@Lazuli
Follow
Day 77: today i flushed her and then poured 8liters with ripen trough it
Likes
136
Share
Week 7 / Day 49 Flower begins today 29/12/2021. EC - EC has been 1.2 inflow all of this week, but runoff has been around 1.6-1.7. Although I am using less than half of what mills suggest of A&B but full strength stimulants, like I have to the whole grow, since I have introduced the Ultimate PK at 2ml/L the girls have both began to burn pretty bad mainly at the tops. I have done 4l per plant of a 1.1EC solution with half of the suggested (1ml/L) of the PK to see if that can stop the burn getting worse. I also dropped the base nutes by 5ml too. Hopefully this mini “flush” will stop it progressing. Once EC is stable / burn stops I will watch closely and up base nutes again to higher EC or higher PK if required but from what I can tell it’s very strong stuff compared to the rest of the Mills line. Multifeeding - 20% Runoff every feed, 3 x per day, 2L per feed. 6.0pH. “LST” - again, the ties have been left on as it does not seem to affect the plants. If that changes then I will remove it as I am liking the density I am getting lower down due to light getting deeper than usual. The buds are definitely growing in size daily which makes me believe it is nute burn mentioned above and not lockout as if it was the symptoms would be far worse, plus the top is the most effected part of the girls indicating a recent change is the reason for the burn and the lower stuff is barely affected. I will be keeping EC to 1.1-1.2 again all this week, and only adjusting PK & base nutes if the girls seem hungry as I really don’t wanna make the burn worse or get to a point where it effects the buds. Hopefully just another 14 or so days maximum till chop, can’t wait to see what these turn out like. Both girls are covered in trichomes from top to bottom and dense throughout. Just want these girls to finish up and power through this burn till the end and hopefully doesn’t hurt the girls too much! 🙏🏻🤙🏻💚
Processing
Likes
13
Share
Likes
12
Share
3 are really flowering, one is pre flower and one is still veg. Still all are quite healthy, no signs of seeds so lucky I seemed to have culled the male soon enough. The one I topped once is 2.3m but the ones I topped twice are only about 2 meters and started flowering first. Finally it is sunny and the plants are loving it. Looks like I have another 4-6 weeks of flowering before I can harvest
Likes
114
Share
💩Alrighty Then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈 We got some Gorilla Punch 👊 👊 👊 DAY 28 👉 Its been a really crazy week , major storm rolled in didn't have power for 4 days 😳 I had to be creative but shes doing fine 👌 I believe the stretch is on 👈 So this week I've started her nutrients regiments 👌Just need to remind myself to take it easy 🤔 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍👉Added an RU45 too the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈
Likes
34
Share
Zenzation is fast, very fast, filled and took color quickly and quickly volge at the end. The flowers are full, very full and seem truly succulent, the bassine shape, I spoke many times of the sides that I left then if you want high plants to take advantage of the growboxes in height Make the topping, without LSS and leave only the main line cloning the center. If instead you want a low plant you can leave side that will become very big and do some lst and fimming to keep them low and level them with the center that still weakens. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com
Likes
4
Share
The beginning of flower week 5 the girls have bouncing back from the previous defoliation, I add some Marshydro SP250 to the tent the first few day due to hot weather and too much heat the girls leafs curl in so i add some cold mist humidifier and new circulation fans for better air flow to drop some temperature and add more moisture to the air and they seem to love it then i continue more LST to expose more bud side to the light next week i will put down scrog net down and hopefully doing more defoliation as they getting very bushy now, if anyone have any advise or any tip for the next part feel free to drop a comment it would be much appreciate
Likes
6
Share
@Growbody
Follow
Tag 88: Die Epsilon F1 Automatic von Royal Queen Seeds hat den besten Zeitpunkt zur Ernte erreicht. Blütetag in der Erntezeit. Das verspricht den höchsten Ölgehalt und damit die höchstmögliche Aromaausbeute. Die Buds sind klebrig und sehr hart. Ich versuche die Schöne langsam zu trocknen, ich schalte nur abends für ein paar Stunden den Venti an. Das Nassgewicht ist mit einer Küchenwaage gemessen und nur grob über den Daumen ernst zu nehmen. Schliesslich zählt das Trockene. 🥦 😀
Likes
8
Share
@KannaKoom
Follow
7/14-7/21: This week I was out of town but implemented the self watering bases and the plant really took to it. My buddy came over and watered and took a few pictures for me, and I was able to get some pictures with my good camera when I was home fore the day on 7/19. I wish I could have been here to see it, but this week there was some serious growth and she stretched so much. The main cola leave tips got a little burnt but nothing to be concerned about.
Likes
4
Share
Culminando semana 3, este es mi segundo cultivo, creo que se ven mejor que mi primer cultivo.
Processing
Likes
1
Share
Day 1: - 1ml terra grow, 1ml pure zyme, 0.5ml power roots. 1L solution / 3 Plant Day 2: no water Day 3: 1,3L / 3 Plant Day 4: no water Day 5: 1,3L / 3 Plant Day 6: no water Day 7: no water
Likes
43
Share
@Just_Weed
Follow
Only watered with water this week and runoff ppm still shows around 1000. There is no burning so it seems Bio tabs did their job. Removed the SCROG at the end of this week in preparation for harvest. Harvest will be tommorow at day 176 ( 71 from flower) Trichosomes seem around 50% cloudy with around 25% amber and 25% clear. Chopped her Day 71 from flower, completed budwash with 3 buckets solutions using filtered water and lemon juice, soda b and , hydrogen peroxid 3%, only using very low amount compared to Doc Budwash tehnique found on forums cause I didn't have more then 250 mL at home. Weight is around 2.5 KG wet before washing. Now trying to achieve stable humidity around 50%, 60 % and planning to start trimming i na few days....
Likes
1
Share
Likes
19
Share
@valiotoro
Follow
Hello everyone 👋 Week 6 of flower for the Banana Purple Punch auto from Fast Buds 🍌😈 She grew fast with a beautiful color,for the nutrient 4ml/L terra bloom & 1ml/L power buds & Green sensation 1ml/L from Plagron one more time then only plain water 💧 Mars Hydro SP-6500 100% Have a nice day 😋