Out of the two plants, I only harvested one of them. I dried and cured the gassy Fino. It is curing right now. I’ll do a report a little later as far as the girl in the back right she she just sucked. Extremely large fee and just didn’t grow good, so I’m going to turn her into bubble hash chopped her down in frozen. The gassy Fino on the other hand did yield very well. I got 7 ounces off of her of all solid buds and there was probably about 2 ounces of large fat, I just threw in the trim bin

Récolte au 53ème jour de floraison

i cant remowe weeek 3 is wrong ,veg beggins ,tanks ... @Coast grower...

Hello growmies! 25/08 - Alimentação Royal Gorilla # 1 : CE = 1,39; pH = 6,3 O gráfico representa a nutrição da RG#1 misturada com 2,5L de água. 25/08 - Alimentação Royal Gorilla # 2 (2,5L): CE = 1,33; pH = 6,1 -BioGrow - 3ml; BioBloom - 5,5ml; TopMax - 2,5ml; BioHeaven - 6ml; Activera - 5ml; 25/08 - Alimentação Queijo Royal # 1 (2L): CE = 1,36; pH = 6,2 -BioGrow - 3ml; BioBloom - 6ml; TopMax - 2ml; BioHeaven - 6ml; Activera - 6ml; 21/08 - Alimentação Queijo Royal # 2 (2L) - CE = 1,54; pH = 6,3 -BioGrow - 3ml; BioBloom - 5ml; TopMax - 2ml; BioHeaven - 6ml; Activera - 6ml;

Week 5 veg - clones and Week 3 - Blueberry Cupcake (Humboldt Seed Co.) and French Macaron (TH Seeds) from seed. G-41, Frosty Gelato, and Frozay Gas topped with 2 clones each taken from cuttings to propagate placed in 2x2 clone/seedling tent with low LED lighting. Temps in low 80F w/60% ROH. Clone cuttings covered with sandwich bags used as humidity domes. After taking cuttings transferred G-41, Frosty Gelato, and Frozay Gas to 3x3x6 AC Infinity tent under Mars-Hydro FC-E3000 set at 50 percent power (PPFD range for veg). Black Cherry Gas clone, Blueberry Cupcake, and French Macaron from seed remain in 2x4x5 AC Infinity under Spider Farmer SF-2000 with dimmer set at 50 percent power (PPFD range for veg). Continued twice weekly IPM foliar treatment with Organishield as well as watering soil program (SP).

They are starting to fatten up really nice and the flush will start today July 2nd 2023 on to my next adventure with fastbuds northern lights and jack see the progresss. So today is July fifth they are starting to really gain their weight I started watering them with 55-59 degree water to help it feel like it’s the end of the season. Will be chopping on the 7th! The trichomes in them all is unbelievable can’t wait to taste them will be curing in the cannatrol for the first time see how much of a difference that makes.

Got a TDS meter at the end of this week. This lady is also in full on flower!!! I just love seeing the pistols, I am also catching a small bit of smell during a small period when the lights come on! She is starting to spread out and even out well. I dont think she is to great for LST, or at least she should be started a bit towards the end middle of week 3 or the end even. She grows short and bushy.

Maybe this is last week for this plants 👌

mrjones - Slurricane #7 S1 🌱Slurricane #7 S1 @inhousegenetics_official 👨‍🌾🏽GD Grower: MrJones 🔹🔹🔹🔹🔹🔹GOALS🔹🔹🔹🔹🔹🔹 🌞Environment - 75/80℉ and 55% Humidity 💧 Feeding - Advanced Nutrients Organic ⚗️Soil - 50% Ocean Forest / 20% Tupur Royal Gold / 10% Earth Worm castings / 10% lobster Compost / 10% Additional Perlite 🍃Training / HST, Will be topping, Cloning, and creating larger plants, and placing to flower under a trellis 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡Mars Hydro LED / Veg Geeklight Monster Board 480W V4 / Flower 480W FC 4800 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Rambling - Week 14 / After pushing the veg stage on these ladies, I am going into damage control this week, I have not quite set up my goals but will double back today with my path and results, along with updated pictures. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️ Sunday - 05.09.21 / Fed with 30 ounces of H20 PH @ 6.2, going to be working the plants later, lots of pruning and cloning ahead. I was able to get the plants under a SCROG just to redirect the cola's - one plant the stems are just way too mature to manipulate. ▶️ Monday - 05.10.21 / Slowing transitioning soil and feed over together, feeding about .5 gallons per day in the larger pots, once I get the soil set, should only have to water/feed every other day. ▶️ Tuesday - 05.11.21 / The plants are looking great, they are starting to push new branching up so I decided to flip the timers to flower and shifter over to the bloom nutrients. ▶️ Wednesday - 05.12.21 / Fed .5 gallons of Bloom Nutrients. Going to stick with the AN product line, just going to reduce the amounts I have 1 awesome clone so far, and about 60 in various stages, going to put one outside alongside its sister.,. ▶️ Thursday - 05.13.21 / Fed .5 gallons of Bloom Nutrients. ▶️ Friday - 05.14.21 / Fed .5 gallons of Bloom Nutrients, I will be shifting to every other day, with the feedings. The clone was transplanted over to a 1-gallon pot, I have 3 more clones rooted that need to be placed into soil. ▶️ Saturday - 05.15.21 / I have about 4 total active clones, this strain is just very hard to clone! 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Cultivar Information - In House Genetics - Slurricane #7 S1 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹

D80/F29 - 12.4 - All is well except for 1 Black Sugar plant that is showing what I believe is calcium deficiency. Hmm, it’s really only on the older leaves, none of the new growth is affected and the buds are still developing on pace. So I will give some compost tea, along with all the others. Let me know if you have any other ideas please! D83/F32 - 12.7 - Cruizin. treated with some top dress super soil concentrate. Beside the one deficient plant, the others are all great ❄️ ❄️ ❄️ ❄️ ❄️ ❄️

Growing faster then ever getting big and green 🍀

3/11 to 3/17 Veg Days 22 to 28 Week 3 Transferred to Auto pot base and continue to top feed for another week before setting up and turning it on. Began node strength training by simply pressing down on the branches to encourage water way repairs into the branches since these are the main arms of my mainlines. They more than doubled in size in just 4 days. Feed this week was 3 cups of 6.3ph RO water once using 100ppm of Veg Mix (recipe Week 2) However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0). Then about 4 days later when I transferred to the auto pot, I added .5gal of plain RO water to top feed over the new soil. Feed plan next week will be to start using the reservoir and autopot base feed by the end of the week. I expect to use another .5 top feed prior to that tho.

Title: 100% ChatGPT-Guided Grow – 12/12 Fast Flower Test (With Supervision) Hey growers! This grow is an experiment: I'm letting ChatGPT guide my entire grow cycle, from lighting to nutrients to environmental tweaks. It’s all based on AI suggestions. Of course, I’ll still be keeping a close eye on things — if I see something going wrong or the plants aren’t vibing with the plan, I’ll step in. But the idea is to test how far AI can take a grow under controlled conditions. Strains – All from @Sweet_Seeds (F1 Fast Version): Mental Rainbow F1 Fast Version Tropicanna Poison F1 Fast Version S.A.D. Sweet Afgani Delicious F1 Fast Version Gorilla Girl F1 Fast Version Setup: Coco in 20L @MarsHydroLED SmartPots Grow tent: @SecretJardin DR240W Lighting: 2x 720W LM301H EVO LEDs 12/12 from seed Germination: May 14th / Main grow starts May 20th Nutrients: Hy-Pro Coco A/B CalMag Pro, @BAC Silica Power, F1 Extreme Booster Irrigation: Week 1 hand watering, then Blumat pH starts at 5.8 CO₂ supplementation via natural gas system (Spider Farmer GGS) Goal: Complete a full grow cycle in 10 weeks or less, from seed to harvest. Updates will be posted in a personal yet informative style — a hybrid of stoner chill and data-driven grow logs. Let’s see what AI can do in the grow tent. Stay tuned! 🤖🌿 🌱 Weeks 1–3 (May 20 – June 9) – Seedling to Early Flower (Stretch Phase) Goals: Strong root development, firm stem structure, controlled stretch Light: 12/12, start at ~500 PPFD → ramp up to 800 PPFD (day 14–21) CO₂: 1500 ppm (only active when lights are on and temps 26°C) Temperature: 26–28°C day / 22–24°C night RH: Start at 70% → gradually lower to 60% Nutrients (EC ramp-up): Start EC: 1.0 → increase to 1.4 Plagron Cocos A+B + CalMag Pro (0.2 EC tap water) Always mix Silica Power first (0.1 ml/L) Actions: Week 2: Start light defoliation on lower leaves Week 3: Begin LST if desired pH: 5.8 throughout the veg phase 🌸 Weeks 4–5 (June 10 – June 23) – Flowering Phase 2 (Bud Set) Goals: Initiate flower formation, maintain healthy leaf mass, stimulate bloom EC: 1.5–1.7 (monitor Blumat watering rate carefully) RH: 55–60% Nutrients: Plagron Cocos A+B CalMag Pro Silica Power (0.1 ml/L – only until end of week 5) Start B.A.C. F1 Extreme Booster at half dose, watered manually twice a week Light: 900–1000 PPFD if plants can handle it 🌼 Weeks 6–7 (June 24 – July 7) – Flowering Phase 3 (Bud Building) Goals: Develop dense flower structure, maximize flowering potential EC: Up to 1.8 max RH: 45–50% Nutrients: @Plagron Cocos A+B + CalMag Pro @BAC. F1 Extreme Booster at full strength Actions: Final defoliation at beginning of week 6 Inspect leaves regularly for airflow and mold prevention 💧 Weeks 8–9 (July 8 – July 21) – Ripening Phase Goals: Maximize terpenes, trichome maturity, flush medium Week 8: EC: taper down to 1.4 Stop using booster Optional single flush with enzymes (manual watering) Week 9: Only plain tap water through Blumat (~0.2 EC) Temperature: 24–26°C Dim lights to ~600 PPFD for final 3–4 days ✂️ Week 10 (July 22 – July 28) – Harvest Trichome check: Aim for 10–20% amber with a loupe Optional: 48 hours darkness before harvest Temperature: Keep low (20–22°C) to preserve terpenes Deadline: Harvest no later than July 28 Powered by the new 2025 @SpiderFarmerLED GGS system.. Detailed setup (only SF parts mentioned here): SF GGS Grow Light Controller (1x) SF GGS AC10 Kit (1x) SF GGS 6 Inch Clip Fans (2x) SF GGS 6 Inch Inline Duct Fan (1x) SF GGS SensorPro Kit SF Ultrasonic Humidifier May 20 – CO₂ moved outside, lighting dilemma, and a warm future ahead Moved the CO₂ generator outside the tent today. Immediate win: steady 700 PPM from just the pilot light, no active burn needed. When turned off, it drops neatly to 400 PPM, matching the calibration point. Double-checked with the Dimlux CO₂ sensor—readings line up perfectly. Still no tracking info for the originally ordered lights, so out of impatience I grabbed two new 720W LM281B fixtures from Germany this afternoon. Should arrive Friday/Saturday. It's a Trade Assurance order, so in theory, I'm covered. Now the question: let the seedlings coast at 259 µmol for two more days, or hang the old lights to boost them to 500 µmol? Eight out of twelve are already above soil, and honestly, I’d rather not mess with the current vibe. Leaning toward leaving them be—low stress, happy sprouts. Best part: temps dropped to 27.9˚C inside the tent now that the CO₂ generator’s out. Room itself is 24˚C, so all in all pretty chill. Curious what’ll happen once those dual 720W monsters fire up… it’s gonna get toasty, no doubt. 24/05: Stocked up on new Plagron nutes—finally. Now I can lock back into the full 10-week feeding plan (Plagron Cocos + B.A.C.). Flushing the res tonight and going full reset. Mixing fresh soup right after, dialed in to match this schedule: Week 1: Plagron Cocos A/B: 2 ml/L B.A.C. Silica Power: 0.2 ml/L Plagron CalMag Pro: 0.5 ml/L B.A.C. F1 Extreme Booster: 0 ml/L EC: 0.9–1.0 pH: 5.8 PPFD: 500 DLI: 22 RH Day: 70% RH Night: 65% CO₂: 700 ppm

So I'm flushing this week, Sunday I used Flawless Finish and watered heavy early, and did a 2nd plain ro flush 6 hours later, I did the same thing Monday. Tuesday I did not give any water at all, Wednesday I flushed the same way with Flawless finish, but water 2 times after that night, I let everything dry Thursday and Friday, It is Saturday, Today I have used only RO water, I am done adding anything. I think I could call it good, but I am going to keep things going after today, tomorrow/Sunday, and Monday, I will not water again, Tuesday the light will not even come on and I will give it a couple days of dark to finish. I could use some tips on how to get some better pics. I try, I really do, but I'm not getting the pics my eyes are seeing, so in the center of the area is all yellow and marooning leaves, and the buds have a pink tint in that area. The trics are getting there, but not yet, I figure by end of week they should be right... almost all cloudy now, a few clear left, but barely any, the few amber here and there, but I'm also not taking a piece to check from the top either, I gettin a look at a few small little buds, near the top, but not the top, I feel like I'm close... , So anxious had to phone a friend to tell me why to wait today... lol, I'll test my runoff ppm's tonight just to be sure, but the way the coco is taking the water makes me think its clean. I'm always ready at the end, Garden of Green seeds have ALWAYS made me look like a great grower. I'm excited, The smells, is very strong, it has a sweeter smell, next week I should have harvesting pics... Thanks for checkin it out

Everything looks fine, they begin to stretch

Wow well she does look sorry for herself. A couple of days ago I sprayed her with pesticide. This has damaged her leaves. I hope she can bounce back from this as it's a critical time in her growth.

I mean this genetics it's excellent ... if I would grow zombie kush again ... good job ripper seed ... she fought and was very strong against the plagues after a beginning outdoors ... she fought against the white fly. worms .. red spider and other insects ... and deserves your recognition ... it will not be the most beautiful plant with its leaves impeccable ... but she is a champion ... thank you ripper seed .. .

Ooooooweeeeeee they’re all doing so good even the extras that I threw in flower with out cloning are doing great .. in just 2 more weeks I’ll throw the donor plants into flower

- The ladies got a little hot this week when I had to keep them in a box during a house inspection. Next day a lot of pistils had turned brown and now end of week, there’s not very many swollen calyx and new pistol growth. - I raised the light in order to lower the heat a little (it’s also been a hotter week this week in general), I think it was a little too close at 14”. Raised it to 16. - I spoke with someone on Reddit who told me about “shooting powder”, a sparkling PK booster that reverts the plant back earlier in flower. Fucking magic. Going to try that for the next three weeks to see if I can get the ladies to bounce back and produce more girthy bud. They sure did frost up more though! ❄️ - leaf tips stopped burning finally after last weeks sporadic EC spikes. EC back down between 2 inflow with 2.2-2.3 outflow. So, I’m happy with that. - added another fan. Found a cheap $15 fan that has a low profile back and can sit in the corner without blocking the light. Doesn’t rotate but makes the ladies dance a littler more which is nice 💃🏻