Recommended
Likes
Comments
Share
**Party time—**all three seeds have sprouted! I’m gently watering the plants, and it turns out that the ring formed by the mulch works perfectly as a visual guide for where not to water. This helps me avoid flooding the still-fragile seedlings. Again, I’m not sure if it’s necessary, but that’s how I’m rolling for now. Now let’s get down to the stats. I’ve done a fair share of theory, and I’m aiming for an ideal VPD. For the early vegetative phase, I’m targeting a VPD of 0.5 kPa. That translates to around 85% relative humidity at about 28°C. For light intensity I am aiming for 200 to 300 PPFD. Watering is every other day to keep the soil moist and prevent it from turning hydrophobic.
Likes
1
Share
@Blucha
Follow
Did 2 flushes now. They have only one more week to go and they're finally ready.
Likes
33
Share
Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Sweet Mandarine Zkittlez F1 FV : Genética feminizada y fotodependiente de floración ultrarrápida. Primera generación filial (F1) resultante del cruce entre un clon élite de Zkittlez (muy potente y resinoso, con un marcado aroma tipo Sour Diesel cítrico, entre naranja y mandarina) y nuestra Sweet Mimosa XL Auto (SWS94) que también tiene tonos aromáticos cítricos entre naranja y mandarina. El resultado del cruce es una vigorosa variedad híbrida fotodependiente muy resinosa, potente y aromática. El aroma de esta variedad es delicioso, con tonos Sour Diesel muy especiados, tonos de naranja y mango, fondo amaderado y lejanas pinceladas frescas como de pino o hierba recién cortada. Algunos individuos pueden mostrar flores y hojas con tonos púrpuras y rojizos al final de la floración. El efecto es enérgico, alegre y estimulante de la concentración y la creatividad. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1. 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 4: Aparecieron un monton de erizos esta semana, el temporal ha hecho algo de mella en la carpa al bajar las temperaturas aunque todo sigue correcto. Continuamos con las dosis de nutrientes recomendadas por el fabricante.
Likes
57
Share
@nonick123
Follow
Día 6 (29/04) Spray solo agua el top del sustrato. DLI 13 Día 7 (30/04) Spray solo agua el top del sustrato. DLI 13 Día 8 (01/05) Spray solo agua el top del sustrato. Subo a DLI 17 Día 9 (02/05) Elimino la cúpula casera de humedad y empiezo a regar con 300 ml solo agua Día 10 (03/05) Empiezo a luchar con una ola de calor inesperada para esta época, que me trae temperaturas exteriores de 30 ºC y humedad relativa del 30%... Mantengo la cúpula casera de humedad Día 11 (04/05) Hace muchísimo calor.. 30 °C. A ver como lo llevan Hago un invento casero para aumentar la humedad Día 12 (05/05) Primera alimentación con Aptus! 300 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 Creo que las plantas se ven un poco pequeñas para tener 12 días... esperando por explosión de crecimiento en los próximos días.... 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
54
Share
2019.01.05 - ShishkaBerry Clones Day 97 / Flowering Day 45. Looks like about 2-3 weeks to to go AND THEY SMELL AMAZING! I had a brush with nutrient burn a few days ago but they're recovering nicely. These are very hardy plants, very strong and healthy. Most of the colas are about 15 inches (38 cm) tall, but #5 is 23 inches (58 cm) and it's on the verge of falling over due to the weight (YAY!!) Some of the pistils are starting to brown & I've given them their final haircut. As this is my first "real" grow, I'm not sure how to estimate what the final yield may be but I'm hoping for 50 grams per plant per the clone producer. 2019.01.09 - ShishkaBerry Clones Day 101 / Flowering Day 49 (video) - two of them are top heavy to the point I've rigged a little cord around the stalks and Velcro-anchored them to the wall. I find that the trichomes of this strain are much smaller than the unknown bagseed I last grew. Do they naturally vary by strains or have I done something wrong?
Likes
9
Share
@AAAAFarms
Follow
So happy so far Need to. Learn to properly feed next run
Likes
27
Share
Today is Day 50 !! We have started flower an they are just looking amazing! We have switched up the nutrients for flower, instead of 1 tsp bloom and 3 tsp of veg , we just swap 3 tsp of bloom and 1 tsp of veg !! Can’t wait to see what these laddies do this week!!
Likes
26
Share
Familia, vamos actualizar la segunda semana de estas Zkittalicious de Exotic seeds. Van formándose las flores , poco a poco iremos viendo este progreso. Se las ve bien sanas , van con buen ritmo y aun haciendo defoliación de bajo siguen formándose . Tengo muchas ganas de ver los resultados de esta variedad leí buenas reseñas de ella. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨
Likes
71
Share
@TOTEM
Follow
Will be harvesting today or tomorrow. After one week of flush, I stopped every watering since the start of this week. Now there’s less water inside the pot, and I can definitely feel it by moving it around. Buds are visibly bigger now! See you soon for the final harvest!
Processing
Likes
7
Share
@vertex8
Follow
First day of my first Grow Diary, friend gave me these so I thought I would see what they got, 4 x washing machine and 2 x Jaffa Cake, I will be scrogging, topping and performing some LST to open them up. Transplanted cuttings straight into the 12lt pots, I used the white shark powder around the root area during transplant. Food Making Notes: 1. Canna A, Canna B, Startbooster 2. Measured E.C at 1.2 3. pH'd from 6.5 down to 5.8 4. Added White Shark (just a sprinkle) Feeding was done primarily around the root zone, after a few days I will begin to saturate the whole medium. Update (+3 days): - Washing Machine have really settled in and has had some great growth, I have started doing LST and topping at the 4th node, video and pictures added. - Jaffa Cake not doing so well at the moment, they seem to have transplant shock, I am taking it easy for the moment, spraying them with a Super Thrive foliar spray, within the next feed I am planning to reduce the E.C to 1.0 and add super thrive to the food, along side the start booster and great shark. Update (+6 days) - Washing machine growing really well, got two growing perfectly and two of growing three leaves and many branches. - Jaffa Cake is now recovering from it's transplant shock, made a dome for them to create a high humidity environment while rooting in the pot, dome was sprayed with a mix of water and super thrive, I also made up a different batch of food with 50% of the nutrients, E.C around 1.0 (500pm).
Likes
95
Share
Week 4 day 2 since i start germination, and i think they are evolving quite ok. CS1 is for now the queen in all aspects, shes the stronger, the most beautiful formation with no problems what so ever , CS2 is following and CS 3 also but with mutant leaves all over her, i will however keep giving her love and dedication, mb in the end she compensate with some beautiful flowers 🤞 As for the Tropicannas, TP2 its an amazing girl, no mutations and growing as it should, TP1 is recovering fast from her accident 😅🤞 and she is on the way to become a strong and beautiful girl. They are adapting super well to the new ligth 😅 one less solution to find 👌 Day 27 veg And I’ve been kind off busy, sorry i miss 2 days of updates, but between this 5 girls, my veg room and harvesting my flower run, time only stretches so much since one still have a life beyond the love gardens 😅 but non or less here we are and they look fantastic 🤩😆 all showing strong genetics and i thing i will have different phenotypes on the Chocolate department lets see😁 so far the strongest CS still is number one and number three still mutating her self from day one 😆 but she will take all my love till the end ( we never know ) on the Tropicana department, both looking amazing, number one completely recovered from the led accident 😅 end growing in a way t hat i start to think that she will catch up with the rest pretty soon 🤞TP2 is now the tallest plant of them all With 16cm high 👏 Day 28 veg No updates , all going as it should 😅🤞 Little battle between Topicanna Poisen from @sweetseeds vs Chocolate Skunk from @00Seeds (just for fun) TP = Tropicana Poison CS = Chocolate Skunk All i grow is medecine for myself, nothing to sell, dont even ask !!!! Stay safe and do it with love for the love ❤️ 🙏
Likes
8
Share
Using Promix coco mixed with worm casting on the top layer and promix myco to help with seed start
Likes
20
Share
Update- Fri 14th May Week has been ok but I've not been there as much so it'll be nice to see them today. It looked gorgeous last time there are so many bud sticks popping up from the curly FAT main lines . UPDATE - TUESDAY 18th May All has been going well as you can see from the photos. The only problem is that I have two TOTALLY different Spectrum lights in there so I have to keep switching them over to even the plant out! I’m trying to come up with a better solution but I don’t know if I will be able to afford my cabling, adaptors and all the little bits I need to build my 10 light COB.
Processing
Likes
15
Share
Buenos días familia, hoy traemos la 3 semana de floración de nuestras crazy cookies, zambezaseeds. Es una cepa bastante vigorosa con un tallo robusto 6mm, exactamente a mitad altura. Su cultivo es fácil, apenas se ve bloqueo alguno, traga muy bien en lo que se refiere a nutrientes. Ph en 6,5 y humedad por debajo de los 45 % . 48h entre riego y riego, no olvidemos que están en tiestos de 7L. Su floración está siendo bastante rápida estas semanas se verá como engordan nuestras flores, sin duda este es el momento para meter caña a big bud y bud candy.
Likes
18
Share
Alles läuft gut Pflanzen sind prächtig entwickelt Robust und Gesund werde nächste Woche die Blütephase einleiten.
Likes
11
Share
Likes
4
Share
@pzwags420
Follow
On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd
Likes
110
Share
Die Pflanzen sind buchstäblich in der Woche explodiert. Das Volumen hat sich geschätzt verdoppelt. Die Sanlights sind auf 85 Prozent. Ich werde in 2-3 Tagen die Lampen für 2 Stunden am Tag auf 100 Prozent drehen, um nächste Woche richtig Vollgas geben zu können. Die Luft ist zum Glück sehr CO2-haltig. Die Luft liegt stundenweise bei circa 1200 ppm, im Minimum sind wir da bei circa 800, was für die Pflanzen ganz gute Werte sind. Ich habe mittlerweile einen Honeywell-Lüfter auf Stufe 2 hinzugeschaltet, um Schimmel zu vermeiden. Der Lüfter läuft jetzt auch mit AKF, den ich die Wochen davor nicht benötigt habe. Die Pflanzen bekommen weiterhin 3 Mal in der Woche CalMag (1 ml auf 5 Liter Wasser). Seitdem habe ich keine Probleme mehr mit braunen Blattspitzen. Die Pflanzen haben alle die gleiche schön dunkelgrüne Blattfarbe. Die Feuchtigkeit und Hitze, die die Box produziert, ist unerträglich. Die Stoftöpfe lassen gut verdunsten, bin aber trotzdem sehr zufrieden. Ich bin der Meinung, dass die Pflanzen in den Töpfen einfacher zu groß sind. Genaue Informationen füge ich den Bildern der einzelnen Pflanzen hinzu, um das besser erkennen zu können, was was ist Stichpunktliste: - Pflanzen sind explosionsartig gewachsen - Volumen hat sich verdoppelt - Sunlights auf 85 Prozent - In 2-3 Tagen Lampen auf 100 Prozent für 2 Stunden täglich - Luft ist CO2-haltig (1200 ppm, Minimum 800 ppm) - Honeywell-Lüfter auf Stufe 2 gegen Schimmel!!!es ist kein Schimmel vorhanden es geht um Prävention!! - Genaue Informationen zu einzelnen Pflanzen werden hinzugefügt - Lüfter läuft nun mit AKF (vorher nicht benötigt) - 3 Mal wöchentlich CalMag (1 ml auf 5 Liter Wasser) - Keine Probleme mehr mit braunen Blattspitzen - Schöne dunkelgrüne Blattfarbe - Unerträgliche Feuchtigkeit und Hitze in der Box - Lüfter von 40 auf 70 Prozent um Temperatur zu senken + LF - Stoftöpfe lassen gut verdunsten
Likes
18
Share
It’s a nice grow so far in terms of expectations reality on the seed breeders. Great stuff again. I had a real germination nightmare this time around though - lots of strains failing at seedling so the numbers and strains became more 😂. So the tents are mixed up again to auto on one side and photoperiod on the other. In this tent as well as Afghan and a red gorilla - there is sweet zensation , banana krumble and red hot cookies and a peyote skittlez. Water in using ro solely through the grow. There has been one issue. I tried a “pro” substrate from biocanna this time and I have those little fleas. Really annoying and my aphids are late so kind of annoying - takes the pleasure off a bit. Any good organic solutions let me know please on comments
Likes
9
Share
They all are getting close to harvest except Gorilla Glue which decided to out grow tent. Had to open vent and add light for top cola. Ugh