Really getting thick now! Showing some yellow, begging for some P/K! I just added in Success Nutrients Game Time, so excited to see how fat she can get. I'm a bit obsessed with her now, she looks so pretty. She's about 24" now with her bud growing. Still an easy going plant with minimal effort needed.

Vanno tutte cose bene spero di raccogliere molti chili

Just gotta get the cmh for the veg tent and some ducting, hang the 600 in between the 2 thouies and bloom is on... some transplanted some left to transplant

Great grow, dealt with some pests that took a few plants from me . But overall my best grow quality so far and I’m very happy with the grow!

Das Wetter war durchgehend wechselhaft, aber nicht zu kalt. Die letzten banana konnten ausreifen, ohne zu schimmeln. Dank dem stetigen Wind auf dem balkon -->success .Die sweet zz Auto eins bis vier wachsen problemlos trotz kleinerer schädlingsprobleme, die sich aber von selbst lösten. Fette Colas bilden sie, groß wie liter flaschen.. hoffe da kommt kein budmold, wenn die dichter werden zum Ende .. Die critical nimmt das Training an und nach 3 Tagen schlecht wetter und Anpassung legt sie munter weiter los. Die special queen wurde mit l s t in die Spur gebracht und macht ihr Ding, so wie sie soll. Läuft 👍 bis nächste Woche ✌️

Hi everyone,This time I can update right on time and this could be the last week update before harvest.I am planning to harvest Soil girl or may be both of them next week.Hope you guys enjoy the journey.Actually Soil girl is more mature than Coco girl.More in amber trichomes.Coco girl, She got mostly cloudy trichomes and only some amber.Still not sure it will be better or not if I chop both of them together.I start giving them water only and will flush Coco girl before harvest. Let’s see if I change my mind to harvest together or not ... 😂 ✌️ 🇲🇲 Soil-Organic-LST Day 120~126 Soil RO water pH- 7.0 ppm- 10 Run off pH-6.6 ppm-550 Soil Potting Mixed Recipe 10gallon Pot -Coco peat: 30% -Soil Compost: 20% (Soil,Sand,Cow manure,Ash) -Bone meal: 10% -Earthworm fertilizer: 10% -Perlite: 15% -Marble stone: 5% -Crash egg shell: 3% -Chicken manure: 3% -Banana peels: 2% -Gypsum: 2% ——————————————— Coco-Inorganic-ScrOG Day 120~126 Coco RO water pH-7.0 ppm-10 Run off pH-6.0 ppm-1000 Coco potting mixed recipe 10gallon Pot Coco peat : 70% Perlite : 30% Transplanted from 1gallon coco/soil mixed pot at Day-42. Scrog size Area : 1ft x 1ft (30cm x 30cm) Hole size : 2” (5 cm) Material : iron welded by four steel pillars. Height from base: 6” (15cm) Happy Growing to you all... ✌️

Day 70 for these Fastbuds beauties Blackberry Auto: With dark purple buds glowing fiercely and a dank smell to match, this girl could make anyone's tent look amazing. During the last few weeks her buds have become incredibly dense and sticky. She is very short and thick in stature compared to the other plants I have in flower. I inspected her trichomes over the weekend and ive determined that she is pretty much ready for harvesr. I expect about 2 oz of high quality flower after dry/cure. Forbidden Runtz Auto I'm really blown away with the turnaround in this girl. She was mutated & so small I almost tossed her out during early veg; I'm glad I changed my mind. She stretched significantly between weeks 4-6 and I really wasn't expecting much from her. In reality, she has blown my mind... incredibly dense and sticky buds have developed in the past 4 weeks. She's got the zkittles smell mixed with a gassy terp profile.. I think the higher humidity through flowering phase really helped develop these dense buds. When I checked her trichomes over the weekend I determined that she will be cut down within the next 7-10 days. Process/ Environment changes: - Lowered my SF4000 roughly 20 cm to increase photon delivery to the canopy - Water/kelp meal only from this point to harvest - My temperature has risen due to change of seasons .. roughly at 27-28 deg C during daytime.. this is why I lowered my lights rather than turning them up - Defoliating any unnecessary fan leaves at every chance I get - I've had to use spools of twist tie to use to keep the branches from falling over from their own weight. I'll tie one end to the top of a branch, and the other to the stock. Not ideal but its working. Cheese auto dry/ cure update: After 10 full days of drying, I gave the buds a decent trim and put them inside glass jars where they will remain for many weeks. I add 2 way Boveda humidity packs to help regulate the relative humidity within the containers. I also use tiny hydrometer pucks to measure the humidity and temperature inside the jars. My ideal cure is at 62% RH

Nice week. Tropicana got healthy stuff in the last days. On day 29 I gave her a 1:10 homemade plant manure fertilization with comfrey and nettle which takes about two weeks to see a reaction. Three days later she got her next head fertilization to protect her with field horsetree extract and a cosmic sunstorm fertilization 😉. Smelling a bit but works good with fruit trees or veggies which are sensitive for mold and killer insects. Got to bring some 🐞cause I watched some lice while sucking Tropicana juice. 🤭😅 Northern lights night was nice to watch. Sun is shining and the Temperature during the days is up to 25 degrees. Day 34: Tropicana slept outside for the first time. The temperature at night is over 10 degrees now, soon even more.

unprecedented how fast they grow they grow on average off 10 cm per day which I have never experienced on soil but had many problems to keep the pH under control I do notice that less is more on rdwc now that I have reduced the nutrition, the pH remains a lot more stable 4 days ago they transferred to 12 12 now comes the fun part I also ordered a co2 set so from next week we will add co2 to the space

On the second day of this week, I filled the reservoir again. This time I have an RO filter available to deal with the tap water (EC 0.8mS). I mixed 10l of RO and 10l of tap, which netted a pH of 7 and an EC of just below 0.4. But of course I had to add more CalMag to make up for the filtered calcium. Even after adding all nutrients, the EC was still just shy of 1.5mS which surprised me a little, I was expecting to land closer to 1.7mS, so I am going to increase it a bit next time, probably to around 1.9mS. The plants are in stretch, and they are indeed stretching quite a bit. NYC and SAD are the tallest right now, although the BJ has been catching up a bit recently. They are between around 45cm and 58cm tall, so overall not too much of a difference, which is also good, but I need to keep an eye on it as I would like to keep them below 70cm. I have no plans to put a net in place at the moment, but this depends on the growth of the next week. All of the plants have been showing preflowers around day 7-9 of flower. No signs of pollen sacs so far. Aside from one calcium-deficiency-lookalike type of leaf issue, which I suspect is something else, ther are no issues whatsoever, which makes me happy.

7/27 Transplanted as roots beginning to exit the cups on Titania and Pea Into 5 gal pots one time dose of kangaroots 10ml/gal and Fish SHit 2ml/gal 7/28 They are surprising us with the rapid growth already looking at topping in a few days while still in week since showing green. Lights on hours reduced due to heat to 16 Nuets increased to next stage 7/31 Being forced to use Cal-Mag per the feeding schedule released by GH was hoping it would not be needed but yes can see the beginnings of def. Thats one strike on the new nuet line. Adding 1.5 ml/gal cal-mag on routine basis and not happy about it 8/2 From results we are seeing have decided to go back to the cocotek, this is ok but getting problems we just did not have with the other line. Some color lightening on her as well as Pea

She needs a lot of water because of the tiny pot but coming along nicely.

Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the second week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. The excitement is in full bloom as our ladies continue their journey towards a bountiful harvest. Let’s dive into the details! 🌟 Week 6 (Second Week of Flower) Progress: Day 36-38: Bud Development and Stretching • Auto Fast Pete: Our speedy queen is showing remarkable bud development. The buds are swelling, and the plant is stretching, reaching for the light. The aroma is becoming more pronounced, filling the grow room with a delightful fragrance. 🌿🌸 • Auto Northern Dragon Fuel: This resilient beauty is also stretching and forming dense bud sites. The pistils are multiplying, and the buds are getting thicker. The structure is strong, supporting the growing weight of the flowers. 🌱✨ Day 39-41: Focus on Nutrition and Environment • Nutrient Strategy: Sticking with our plan of using only the organic nutrition in the soil, supplemented by regulator and CalMag in the reservoir. The Autopot system is working wonders, providing consistent hydration and nutrients. The plants are thriving under this regimen. 🌿 • Reservoir Details: • TDS: 400 • Temperature: 18°C • pH: 6.2 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% Maintaining these conditions to optimize bud development and plant health. 🌡️💧 Day 42: Observing and Fine-Tuning • Auto Fast Pete: The buds are continuing to grow and mature. The plant’s overall health is excellent, with vibrant green leaves and strong stems. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are more defined, and the plant is showing no signs of stress. The foliage is lush, and the buds are dense and sticky. 🌱🌟 🌟 Care Tips: • Light: Keeping our full-spectrum LED light at an optimal distance (18-24 inches) to ensure even light distribution. The plants are responding well to the consistent light schedule. 💡 • Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. This week, we’re focusing on organic soil nutrition supplemented with regulator and CalMag. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, and early resin production. This strain is living up to its name with a fast and vigorous flowering phase. • Future Expectations: Continued bud swelling and resin production. Anticipate dense, aromatic flowers ready for harvest in the coming weeks. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, and resilience. This strain is showing great promise for a high yield and potent flowers. • Future Expectations: Significant bud growth and increased resin production. This plant is gearing up for a heavy yield. 🌍🌿 Fun Fact: Did you know? 🌿✨ The second week of flowering is often when the plants show their most vigorous stretch, preparing to support the heavy buds that will develop in the coming weeks! For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 6 marks the second week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress. The buds are developing beautifully, and the plants are thriving under our optimized care regimen. Stay tuned for Week 7, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week6Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

White LSD Auto Feminized Seeds by MSNL 👉Sponsored Grow👈 W5F2 7/27-8/2 White LSD grew 6 inches and is pushing out lots of hairs. She is short and bushy. This week I’m still trying to resolve lockout issues on other plants in the tent by lowering the feed solution ph. I lowered the intake ph to 6.35. This reduced the runoff ph to 7.0-7.82. I have been watering 1500 ml with 125ml run off. This is low and I will Increase water to 1750ml next time. While the other plants in the tent reflect nutrient issues, White LSD looks healthy so far. I hope I have stopped any problems before they start. Thank you all for your continued support and encouragement. Your likes and comments motivate me to keep sharing my journey. Let’s continue to learn to grow together! Stay green, growers love 💚🌿 💫Natrona💫

Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎

Nice strain to grow overall especially for the terps it produced, yield was more on the low side as expected from one for these "hype" strains or whatever you want to call them.

girl, from the beginning she was watered with water from the tap, the value of which is almost 350ppm. and a lot of lime, which prevents me from growing it bigger, but I'm happy with the result :) it's a small pot and only 50 w :) the flowers look very beautiful and sticky :) super ​

Welcome to Week 3 of the Sweet Seeds Gorilla Girl XL Auto’s grow. It’s been extremely cold here in Canada this last few weeks and these plants are doing their best to survive- not thrive. Although they are healthy and happy, they are just not thriving like my previous Sweet Seeds grow from the fall of 2021. The temperatures are only a few degrees cooler than spring, summer and fall but the humidity is extremely low at this particular time of year- 20-25% at best. Without adding additional humidity via a humidifier, my plants are at the mercy of the dry Canadian winters. Week 3 did not bring the expected growth spurt experienced by the plants in my previous Sweet Seeds grow (the Cream Mandarine XL autos). I have included a side by side comparison photo above to show the massive difference in size between the two SS grows. It’s because of the slow growth that I have decided not to top these plants 👎🏼 I increased the water early in Week 3 to 2.1 litres per plant every 4th day (0.52 of a litre per plant per day). Hopefully these ladies pick up a little over week 4. Mom’s Tip for Week #3- To Top or Not to Top?… Topping is an simple technique used by growers to split the main stalk/stem into two separate stalks/stems. This allows for height control when growing XL strains, encourages lower branch growth creating a more equal canopy height and of course- creates two beautiful, big colas instead of one! But topping Autoflowers has long been the source of great debate so I’m here to clarify Mom’s Do’s & Don’ts when topping autos. Do top your plants if they are healthy, thriving and on track (growth wise) with other growers and any info the breeder’s might provide. Don’t top your plants if they appear unhealthy, simply surviving and behind/slow (growth wise) compared to other growers growing the same strain. Do top your Autoflowers between 3-5 weeks from seed or when your plants have grown as many sets of branches as you desire (usually 4-6 sets of branches or nodes). Don’t top your auto’s beyond the 5th-6th week as they are most likely going into full flower. Do top, prior to or very early on in the pre-flower stretch and don’t top too late in pre-flower or once budding has begun- it’s too late and you’ve missed your opportunity for this grow. Do top your plants if you know what you’re doing and you’ve got the right tools. Believe it or not, I use a sterilized set of nail clippers (dedicated to this job alone) as they deliver a clean, controlled, perfect cut every time. Don’t top your plants if you haven’t done your homework or you haven’t got the right tools. Many people use their fingers but I find they are too large and awkward for such a precise job. More than once I have missed (FIM’d) or taken one of the two baby branches that are supposed to be left behind or simply injured those tiny developing branch sites by accident. Do top your autoflowers if you are growing a large/XL strain in a small/short space. This allows the grower to influence/control the overall height of the plants and creates a more equal/level canopy of foliage and eventually bud. Don’t top your auto’s if you are growing a short, fast flowering strain as this can sometimes stall/stunt them a tiny bit. Some Autoflowers run such a tight seed to harvest schedule that they legitimately cannot afford any interruptions in their growing cycle so check the breeder’s info before you chop. Do have fun with growing your Cannabis and don’t be afraid to try something new. Don’t top your Auto’s expecting to triple your yield though. I have learned that it will change the shape and height of your plants and you’ll end up with less low level, larfy bud but your yields will be almost identical whether you top or not. ✂️✂️✂️

Empezamos 3ª semana de crecimiento, durante esta semana, podare los bajos y algún nudo. Tras unos días de recuperación pasaremos a floración. Se empezaron a germinar el día 10/10/23 llevamos 27 días desde que se empezó a germinar. Hoy día están siendo regadas con 1.5 de ec y 6.0 de ph, usando la gama de abonos orgánicos de boom nutrientes y CALMAG. Uso de sustrato el LIGHT MIX de GBNUTRIENTS. Son frondosas con grandes hojas, nudos muy corto entre si y además están verdes. Se nota que la luminaria hace su trabajo sin calentarse y por eso la tengo cerca de las plantas evitando que se "espiguen" **Actualización 08/11** he podado bajos de todas las plantas y alguna hoja grande que tapa las formaciones. En pasar 2-3 días para que se recuperen, pasamos a floración.