Week 20/5 - 26/5 Final days!

Hinten Links / Vorne Links-Rechts Purple Queen Auto Hinten Rechts Quick One Auto. Komische Genetik dabei aber Hoffnung bleibt. 1,5 L pro Topf alle 3-4 Tage

The week went really well and we are starting strong into week 3. The King's Juice Auto #1 is giving me some worries because she's a little bit small. Also, I saw an aphid on her. Never underestimate green light spectrum guys! Speaking of light... I raised the light intensity up to 30% (80W) and will keep doing it like this until I end up with a DLI of 40-45. With 19 hours of light that would be roughly 60-65% of light output. Interesting. From the side view, I think #2 is my favorite but overall it's still #3. Still unsure what kind of training I should do or if at all. Alright, I trained them and tried some different strategies. I topped #3 because she was by far the tallest one anyway, I "lollipopped" #1, so that she hopefully pushes more power into the upper part and I just tucked the fan leaves of #2 under the branches. At least as far as I could. #2 definitely has some lovely growing! She also has the first white hair coming out. Will try to get a photo of that later, hopefully with my new wifi microscope. Should be delivered tomorrow. Wasn't delivered but how she develops, I don't need the microscope. First set of white hairs is clearly visible! I'm exited to see how they continue to develop.

Topped Fendi 2, 3 & 4 this week. Also defoliated the oldest leaves that were toasted. Also set up an indoor garden in my living room with some storage shelves and moved these lil ladies in there.

My second hydro grow and it seems I failed a bit here: 1. Too little defoliation and airflow 2. More light to mid and lower branches. Low light and low airflow made the buds stretch a lot and be airy, not taking much light made them white and mostly tasteless (cardboard taste). Upper branches brings the sweet taste of this strain up but effects were quite low. Even thou the high is enjoyable and taste from upper buds are tolerable. Lower and mid buds gone to trash unfortunately. I'll stop for this Summer with Hydro, but will try my 3th time in winter

Day 33 she’s beautiful and flowering and wonderful. I’m really excited for how she’s turning out. I used recycled dirt for the first time ever because they were my last cycle for summer break. But she’s impressing me like always none the less. can’t not wait for her!

Not training yet. Waiting till she gets bigger to start training.

She broke through the surface already free of her seed coat, standing tall within the day and growing quickly throughout the week. This is only my second grow, but it already seems much faster this time around. Tent stats: - Lights: started the week around 220 PPFD, ramped to 300 by end of week. - Temps: seedling heat mat kept in the mid-80s (30 C). - Humidity: VPD has been set to 0.6 kPa. Growth is already looking surprisingly broad-leafed for a "sativa", maybe she's falling back on her cookies genetics...

GMO Cookies Served with Extra Curiosity ?🍪 Drying & Trimming Report | Garlic, Gold & Preservation And once again… yes 😄 We are dividing the reports. At this point it almost became tradition. But honestly, there is simply no realistic way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * fresh frozen, * washing, * strain review, * extraction plans, * terpene analysis, * and all the small details we love documenting… into one single update without turning everything into chaos. So first of all: thank you for the patience. Everything from seed until harvest was already documented in the previous reports, but for the people arriving only now, let’s quickly recap how we got here. This GMO Cookies run was grown under a 12/12 from seed cycle using the F.O.G. LED setup, with environmental management focused on healthy plant development, airflow, structure, and resin production. Throughout flower the girls received selective defoliation, LST, continuous observation, and careful feeding while expressing one of the loudest terpene profiles we have had in the room in a while. And now? Now the plants have moved beyond harvest and entered one of the most important phases of all: preservation. Because growing beautiful flowers means very little if drying and trimming are rushed afterward. So this report belongs to: * drying, * trimming, * handling, * preserving terpenes, * collecting resin, * and slowly preparing the medicine for cure. The branches that were selected for drying spent approximately: * 10 days drying, * around 60% humidity, * temperatures between 18–20°C, with the first couple of days running slightly drier in order to help remove excess surface moisture before stabilizing the environment more carefully. And honestly? The aromas coming from these flowers during drying were absolutely ridiculous. Now, to be completely honest and transparent: these were not the densest flowers from the tent. Visually they actually looked denser while still wet than they ended up feeling after drying. But what they lacked slightly in density… they completely compensated for in aroma, terpene expression, flavor potential, resin behavior, and overall personality. And honestly, that trade-off is something many growers happily accept. Because this GMO profile is LOUD. Like… walk-into-a-kitchen loud. Real GMO lovers will understand this instantly. Every trimming session felt like sitting next to a chef smashing fresh garlic cloves directly beside us. Savory. Greasy. Funky. Sharp. Warm. Almost oily-smelling. And hidden underneath all that madness: sweetness, cookie notes, earthiness, and weird creamy undertones slowly revealing themselves as the flowers cured further. This is not a shy cultivar. Not even close. Once the drying process finished, it was finally time to trim. So: gloves on. Trim station ready. Trim bin prepared. Scissors cleaned. Glass jars nearby. Grove Bags prepared. And of course… little self-medication beforehand 😄 Because trimming sessions and cannabis culture somehow always belonged together naturally. The branches were broken down carefully by hand, one by one, and every flower was trimmed individually with patience instead of speed. As always, we used pointed curved trimming scissors. And honestly, they are fantastic for this type of flower structure. Especially with fluffier or more open flowers, curved pointed scissors allow you to: * enter tighter spaces, * remove excess leaf material precisely, * preserve flower structure, * avoid crushing calyxes, * and maintain a more natural-looking final product. Straight scissors work perfectly fine too of course, but for this type of trimming, curved points genuinely feel more comfortable and surgical. And with GMO? You quickly realize precision matters. Because these flowers become sticky almost immediately. The scissors start collecting resin. The gloves become greasy. Finger hash starts forming naturally. And suddenly trimming stops being just “work” and starts becoming part of the experience itself. The first dried branches gave us: 137.1 grams. After trimming and weighing, the flowers were carefully transferred into Grove Bags, with smaller amounts also resting inside glass jars for comparison and monitoring during cure. Then we moved onto the flowers dried on the drying rack. Again: not the densest plant from the tent. And honestly, we believe temperatures played a role there. This cultivar appeared slightly more sensitive to higher temperatures than some of the others around her. Our personal feeling is that she continued pulling significant water during flower development, which likely contributed to the final structure remaining slightly more open once dry weight settled. But despite that? The quality remained absolutely beautiful. Sometimes growers become overly obsessed with density alone. But density is not everything. Aromatic expression, resin quality, effect, smoothness, flavor, and terpene complexity matter just as much — sometimes even more. And this GMO absolutely shines there. The second drying batch landed at: 224.2 grams. Again carefully bagged for preservation. And speaking of preservation: we decided to use Grove Bags for most of the flower storage. Why? Because preserving terpenes matters deeply to us. Especially with a cultivar this expressive. The idea behind Grove Bags is maintaining stable curing conditions while reducing the constant need to burp jars manually. They help regulate humidity exchange while still allowing the flowers to continue stabilizing naturally over time. Of course, glass jars still remain legendary and we still use them too. Honestly? Both methods have their place. And later during cure and smoke review, we will probably compare the differences more deeply. But for now, the priority is simple: protect the terpenes. Protect the medicine. Protect the work. Now let’s talk about something we personally love a lot: the “gold.” Or what many people simply call: kief. During trimming, tiny trichome heads naturally separated and fell through the trim bin screen. And honestly… watching that happen never gets old. At one point we jokingly started “playing the drums” Moroccan style across the trim bin while working, moving material gently across the screen and collecting the resin heads gathering underneath. And the result? Beautiful golden powder. Tiny greasy trichome heads. Pure aromatic dust from the plant itself. Eventually we pressed part of it together gently using finger warmth and pressure, creating a tiny mini temple ball. Small. Dark. Sticky. Greasy. Beautiful. The type of resin that already tells you: “This plant is going to wash beautifully later.” And yes… that curiosity is still alive and stronger than ever. Because despite everything already documented here, we still have: more than 700 grams of fresh frozen flower material waiting patiently inside the freezer. That future report is still coming. And honestly? We are incredibly excited for it. But there is no rush. That material is preserved safely and waiting for the right moment to become: * ice water hash, * solventless resin, * or whatever expression this GMO decides to offer us later. For now, this chapter belongs to drying, trimming, preservation, and preparation. Before ending this report, one more important thing: cleaning. Once trimming was finished and the room slowly emptied, it was time to clean everything thoroughly and prepare the environment for future runs. And honestly, this part matters far more than many growers realize. Between runs we strongly believe in: * deep cleaning, * sanitizing surfaces, * cleaning fans, * sterilizing tools, * removing plant residue, * using UVC if available, * using ionizers or environmental tools carefully, * and resetting the room properly. Because prevention is always easier than fighting problems later. A clean room protects future harvests. And after a run like this? The room deserved a respectful reset. Now next week? Next week we finally move deeper into: * curing, * smoke review, * terpene evolution, * flavor, * effects, * smoothness, * strain review, * and our true thoughts about GMO Cookies after spending months with this cultivar from seed until cure. And honestly… we cannot wait. Before ending, as always: Thank you. To Zamnesia. To F.O.G. To Plagron. To Lumiflora. To Grove Bags. To the platform. To the community. To the growers sharing knowledge. To the hash makers. To the flower lovers. To the silent supporters. To the curious people following this strange garlic-filled adventure 😄 To everyone spending even a few moments here with us. This GMO Cookies run truly was served with extra curiosity. And honestly? That curiosity still hasn’t disappeared yet. 🌱 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

Super content jusqu’à présent . Divine à regarder, divine à fumer

Photoperiod buds 🤩 The smell is absolutely divine very fruity,sweet & tropical🍋🍊🍉🍌 Solid like a diamond 💎 Bay harbor butcher’s trim to show the density

Just waiting it out now. No added nutrients, just water. Bubba and Black Dog have exceeded their expected flowering time, and both are at 95% cloudy with 5% or so still clear. Chemdawg and The New can take up to 70 days or more so we’ll see if they’re late too. Bubba is a foxtailing machine. It was one weekend in early Flower when heat/humidity got out of hand while I was away for 3 days. She hermied a bit and I’ve had my eye out for bananas ever since (find a few every so often). Taking a risk to keep her in the tent with the others but if I catch them early enough the others should be ok. Interestingly I found a YouTube video of a guy that ran bubba and had the same foxtail development (also the same scent description and look overall). Nothing like the gorgeous fat purple budded girl I had last year but the citrus smell on this lime green bud pheno/version is impressive. Curious to see how the smoke compares. Scent combo from all four plants is amazing!

Got the screen on her late last week, now it’s a waiting game. She’s growing really fast for only being 5 weeks old. Let’s grow baby!

Just water ")))

Estoy fascinado, con la velocidad del progreso de las Zkittalicious de Exotic Seeds, en tan solo 5 semanas de floración llevan estos progresos, sin palabras… Yo creo que no más de 3 semanas las tendré listas. Apuré a aplicarles el ExplotaCogollos de Agrobeta. Llevan una dosis de medio gramo y a partir del siguiente riego va directamente un Grano de Pk fuerte. El color es perfecto, se ven bien sanas, y es que no puedo pedir más. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.

6/20/21 - They look great! On track and the stretch has stopped completely. See pics and video from today… 6/21/21 - Day 30 of flower! Half way there :) They’ve been drinking water without any runoff coming out of the pots. Also the stretch has stopped and they look good. 6/22/21 - On track. Good size buds and a good smell. Excited for harvest! The room is filling up with flowers. 6/23/21 - I am still feeding with the nutrients listed above which is Week 9 on the schedule. 6/24/21 - We are very happy with the growth and bud size. They look and smell great! 6/25/21 - They are doing well. Just flowering away. I’ll post pics soon. Other than feeding them I am just letting the plants flower. No techniques being used. 6/26/21 - I missed a week on the feeding schedule and gave it straight water. I’m going to run Week 9 again and go from there.

CLAWING / WILTING LIGHT STRESS / OVERWATERING CLONES ARE LIVING THE LIFE MOTHER - DAY 92-98: • Problem: leaves point upward, curl downward - could be light stress / nitrogen or magnesium deficiency / soil pH • Solution: Switched to 450W LED, then 300W running at 25% power to reduce light stress, potentially causing clawing • Solution: Regular CaMg+ feedings in watering and foliar sprays • New LED, while less intense, generated way more heat: temp went up, RH went down • Soil dried out much faster; light watering on D92/93/94/96 -> overwatering, damnit • Growth upward picked back up on D97 • Hot temperatures probably freaked me out a bit and made me overwater, hence wilting, will wait / monitor pot weight D99: Clawing started disappearing. Seems like the 300W running at less than 25% intensity is much more gentle on the leaves. D99: Leaves feel like paper/dry / wilt -> overwatering symptom CLONES - D41-47: • A28 is vegging and growing much faster, bigger and stronger than her mother - will sample clones from her soon • A29 is in pre-flowering

week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress

Day 66 ... the weather get´s more worst too cloudy and cold at night 😱😫😵... so i decide to harvest today 😃👍 Now "Hilde 2.0" is hanging in the dark in the basement and can dry... I'm curious to see how the harvest turns out 😃🙌🙏 Day 2 drying in the dark 😃👍 Day 3 still in the darkroom 😜👍 Day 4 drying out go on and i think 8 or 10 days to go 😉

After 1 week of flush the plant start to fade gently, i hope that gonna be good before harvest. I think my additives tend to keep my plant green, both contain seaweed extract and are slow release. There is a little bit of nice fox tailing.