Likes
65
Share
@Visions
Follow
10/14/19 - manim baked. Time to feed them. Going to start flushing this week! Enjoy a video :) UPDATE* Life happens and we make mistakes. Little too much to drink with a good smoke and a long day at work.... ended up not finishing putting my girls all back in the tent so they were out for a few but only interrupted with light for 3 hours.. Not a big deal since we are this far but live and learn.. Rule 1. Dont get shit faced while taking care of the girls 😂👌😅🤦‍♂️💁‍♂️ Anyways will take pictures tonight and then feed the girls. 10/15/19 - watered the girls tonight. No signs of slowing down! Buds fattening and ripening. 10/16/19- updated pictures. Checked the buds. No feeding tonight. Trichomes are mostly milky with a few clear and a tiny amount of amber. Should be around next week when we hit 8 weeks of flowering, we will then determine harvest week. Shooting for 2nd week of November. Girls should be around 11 to 12 weeks in flowering. 10/17/19 - Watering time and updated pics. Milky and clear with a amber here and there. Shes close but needs I'd say 2 weeks more then a flush. Harvest is close. Her buds are getting fat 👌 10/18/19 - Updated pics Day 50. I'd say 2 weeks from now I'll begin flushing. So by mid November these guys will be dried and jarred 💨 10/19/19 - no watering needed. Buds are looking good. Hoping for 3 oz between the 3 bf phantoms. 👌 seeing more cloudy, amber here and there. I believe by 8 weeks we will begin flushing for 1 to 2 weeks. Then 48 hours of darkness before their chops. Will start setting up my tent for drying once it gets closer. Want to keep the rh at 50 to 52 while keeping the air at 70 to 68. I want them to slow dry and depending in how we run the tent, i will trim either on day 3 or 7. I want to give them 10 days of drying for a good fluffy cure. Top shelf bud is the goal for my first phenos. 10/20/19 - Fed the girls. I think this may be the last week and a half of nutrients then flush.
Likes
10
Share
Processing
Likes
21
Share
@PoppaMac
Follow
This week has been pretty good. Humidifier died on Sunday, picked up a new one and the temp rose to 79. Plant wilted for the first 8 hours or so and then settled into her new environment. She is sitting in a RDWC with a Liberty Haze that needed to get more nutes, so I bumped the nutes up to 600 ppm. She hasn’t missed a beat. So far this strain hasn’t given me any problems whatsoever. Knock on wood it stays that way! Slight smell coming off of her, no particular notes, just a plant smell. 4 nodes in and the 5th is sprouting. I’ll be topping and training soon!
Likes
32
Share
Hallo zusammen 🙋‍♂️. Die Knospen werden jeden Tag dicker und der Geruch ist einfach Hammer. Sonst gibt's nix zu berichten Sie wächst ohne Probleme 😀. 55 Blüte Tag: Habe sie heute das letzte mal gedüngt , ab Mitte nächster Woche werde ich anfangen mit Spülen
Likes
47
Share
March 9th. I nearly forgot the Update from the " Eggs" These Plants are growing in less than 10 g of Soil Feeding/ watering daily . They are diving into the Feedingsolution Its alittle tricky to keep them happy but , I feel it works Flowers are stacking and Leaves are fading alittle everything asign for Final Weeks Those Runtz smell like Heaven I still have alot of Fun with those Grows
Likes
20
Share
@GR0WER
Follow
New week starts! I will wright updates every day now. Cos I don't want to keep photos on my mobile devise. I'll make new photo of a new day, load it up and delete immediately. Keep it safe, guys. 🌞13.11.2022 I putted some more substrate to cover my flowers to the leaves. It's only 'training' till now. Also, one of my mini ventilators started to make a creepy noise. I ordered two more cheap mini USB ventilators. I hope they will live longer. That one died after a couple month of work. Sadly... 🌞14.11.2022 Next day morning my ventilator died. I scrued it apart. Then I remembered I have tattoo machine oil in my garage. When I oiled it and turned ON it began to spin like new... Mb I acted stupid buying two new ones, mb not. It's written on the oil tube: 'Oil your tattoo machine every 30 hrs'. So after a few days we'll see. :-) 🌞15.11.2022 The second one plant has a slightly larger second pair of leaves (triple ones). Maybe because it came from her seed one day later. There were a seed peeling problem to both of them and I was forced to help. A difference in germination time was about 8 hrs. 🌞17.11.2022 My ventilator died this evening. Two others I ordered didn't come to me yet. But they should come tomorrow. I don't know will they pass, but it will be better then nothing... 8 hrs difference between growing flowers still noticeable, it's disposed on photos. No feeding for today. 🌞18.11.2022 Today two new air coolers came. They are good quality and power for their's size but too noisy. Not so bad, I say. I installed one of them (it's on photo) and leave the second old one on it's place. It still works and a noise is not so loud. I wunder, why my plants are different by the size. Maybe because one of my old ventilators stopped all the time? 🌞19.11.2022 I watered my girls with 'GHE Pro Roots' and measured drainage today. Input was ph6.0 and outflow - ph6.5. I think we'll be OK in a few weeks. I learned from the grow questions that auto flowers grow better and bigger in pure coco with perlite, but i have mix soil/coco/perlite in my pots. Now I nervous if all will be OK. But my substrate is soft (tapped it with my finger) even when it's watered. We'll see how it'll go compared to others diaries of the same strain.
Likes
112
Share
Alright Then REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 We just hit week 4 and all is well , have to admit she been a little bit of the runt of the litter ,still she keeps on pushing forward 😃 ....... So this little sprout is tuff one and has begun to start with pre-flowers👍 Still very little vertical growth , but I'm working on it 😏 Very little water given ,so far and rain water to be used entire growth Her little sister is about 12 days behind and is playing catchup and she's doing great 👌 Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉I WISH GD HAD DISCORD SERVER SO GROWMIES COULD HAVE A PLACE TO HELP AND TALK THINGS RELATED TO GROWING IN REAL TIME .....👈 👉SO I CREATED ONE ALL YOU NEED IS TO JOIN THE GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!
Likes
33
Share
Gracias al equipo de Sweet Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Sweet Mandarine Zkittlez F1 FV : Genética feminizada y fotodependiente de floración ultrarrápida. Primera generación filial (F1) resultante del cruce entre un clon élite de Zkittlez (muy potente y resinoso, con un marcado aroma tipo Sour Diesel cítrico, entre naranja y mandarina) y nuestra Sweet Mimosa XL Auto (SWS94) que también tiene tonos aromáticos cítricos entre naranja y mandarina. El resultado del cruce es una vigorosa variedad híbrida fotodependiente muy resinosa, potente y aromática. El aroma de esta variedad es delicioso, con tonos Sour Diesel muy especiados, tonos de naranja y mango, fondo amaderado y lejanas pinceladas frescas como de pino o hierba recién cortada. Algunos individuos pueden mostrar flores y hojas con tonos púrpuras y rojizos al final de la floración. El efecto es enérgico, alegre y estimulante de la concentración y la creatividad. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 3: Ha sido una buena semana, ella ha dado un gran cambio en su lugar definitivo 😎. Se le ha aplicado un tratamiento insecticida con agua + tierra de diatomeas ( 1 cucharadita por litro de agua), también se le aplica un tratamiento fungicida con una infusión de cola de caballo para evitar futuro moho. A partir de ahora se riega manualmente con las dosis recomendadas por el fabricante.
Likes
12
Share
Esta semana, aumentamos a tope la potencia de los balastros, 660w. Realizo la segunda y última poda baja en toda la sala, así nos aseguramos de que las plantas concentran los nutrientes en la parte alta, que es donde reciben más luz, además de facilitarnos el riego y el control de las mismas. En los riegos alternados entre abono y agua cada tres días, eliminamos Bio Vega. También realizo un segundo tratamiento foliar de Propolix, justo antes de que se apaguen las luminarias.
Likes
31
Share
@BudXs
Follow
Super busy with a move and a big garden reno. Sorry, this is the only update for this week
Likes
20
Share
@MaxMo8
Follow
I’m this week I add only water 💦 🚿
Likes
14
Share
@suchydog5
Follow
2-3 buds were moldy so i had to cut them hope it doesnt spread further😳 to be honest i havent seen more beautiful flower than this purple one❤️
Likes
9
Share
I absolutely fall in love with Gorilla Strawberry! Amazing strain ! I see 5-6 phenotypes 1. Is small indica dominant with very fast flowering 2. is dark purple I have never grown a strain with such a beautiful dark purple my favorite 3 is very resinous with big buds and looks like the main photo of Gorilla Strawberry on fast buds web site 4 Is with bright pink pistils 5. Smaller plant with very thin sativa leaves and very thick main cola 6 is a giant sativa dominant with very broad branching, which is just starting to throw flowers and I guess it will grow for at least 11 weeks Compared to Gorilla Zkytllez seems to me Genetics is a bit volatile However, they have one thing in common with a crazy amount of resin and a wonderful sweet fruity scent. I can not stop sniffing buds very pleasant smell I feel like a junkie :D I could sniff this all day But there is one minor problem for me . While one phenotype begins to bloom and needs Bud Ignitor for a larger number of flowering sites, another could be ready in about 2 weeks and needs overdrive to compaction the flower... When I compare phenotype number 1 and phenotype number 6 looks like a completely different strain, the only thing they have together is a large amount of resin and a wonderful smell. But that's just a problem with my growing style, because I mix fertilizers in a big bucket for all plants equally and I don't have time to mix for each one separately Finally, there is a photo of a thick stem that I probably burned when watering with fertilizer
Likes
3
Share
@Takeaims
Follow
Defo going keep going with f1 I have more still growing and there the biggest plants I've had thanks zameizia you guys are amazing
Likes
17
Share
End of week 4 marking around the half way point as both strains both have 8-9 week flower periods. Runtz Muffin #1 already looks like it's going to have more of a longer airy bud structure compared to the others
Likes
14
Share
D71/F27 - 10/06/23 - Added Nutes and water, EC 1 and pH 5.0 D72/F28 - 11/06/23 - Nothing to report D73/F29 - 12/06/23 - Added Nutes and water, EC 0.8 and pH 5.3 D74/F30 - 13/06/23 - Nothing to report D75/F31 - 14/06/23 - Added Nutes and water, EC 0.9 and pH 5.3 D76/F32 - 15/06/23 - 👉Changed Water. Some signals on the leafes. I think it is because of heat but I0m going to ask to the community. D77/F33 - 16/06/23 - I've asked to the community and is heat stress, so I'm going to change the light hours to 12/24 (4 only red ligh and 8 red-white)
Likes
5
Share
So flower has seemed very slow. We are on day 60 of flower, and they are NOT ready. The past two weeks the pH has been dropping tremendously every day. I couldn’t imagine it would be a root issue since I use hydroguard and we have a chiller set at 67 degrees, plus the plants look healthy! So I did my research and tried everything. Finally I decided to go ahead and treat with hydrogen peroxide because nothing else was helping, and Bam! Stable pH! Lesson learned. I hope the plants now start putting on weight over the next week and maturing. I was hoping to flush in a week, but I will just base it off what they are telling me.