The Grow Awards 2026 🏆
Likes
Comments
Share
@Targona
Follow
Targona: 36 days since my little girl sprouted from seeds🌱 Fifth week of vegetation of my Auto Melonade Runtz 🍉🥤🍉 Nutrients: I use Advanced Hydroponics Of Holland nutrients - three basic components, still according to the table for growth and flowering, I only change the dosage according to the plant phase 💓 - - Dutch fertilizer Formula 1 Grow - supplies the plant with substances necessary for the perfect development of roots, stem and leaves; intended for the growth phase 🌾 - Dutch fertilizer Formula 2 Bloom - contains a large amount of nutrients necessary for rapid growth and fruit development, supplies the plant with energy; intended for the flowering phase 🌸🌿 - Dutch fertilizer Formula 3 Micro - increases oxygen intake, improves plant immunity, ensures better absorption of nutrients; intended for the growth and flowering phase 🌴 --------------------------------------------------- -------------------------------------------------- ------ Plagron Power Roots - Root Stimulator Plagron Roots is a biological root stimulator that supports the formation of the root system. I use it until the fifth week of growth 🍃🍃 - I fertilize for the last time in the fifth week of plant growth - this week I fertilize for the last time. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Calmag - The special Calmag supplement was designed for professional and hobby growers who need to supply calcium and magnesium in organic quality to their plants in the long term or immediately. The 100% organic 💩💩 and certified BioBizz Calmag product is made of calcium carbonate and magnesium sulfate supplemented with humic acid. -------------------------------------------------- -------------------------------------------------- -------- BioBizz Bio pH - is an organic pH regulator. An aqueous solution of citric acid, which occurs naturally in citrus fruits 🍋🍋 ---------------------------------------------------------------- -------------------------------------------------- ------- During the flowering period I add stimulants: - JUNGLE X Environ is a highly effective complex preparation for stimulating flower formation. 🌸🏵️ - Bud Candy - carbohydrates for my girls 🍭🍭🍭 General: Auto Melonade Runtz 🍉🥤🍉 - The plant looks good, the side branches have grown to the height of the main stem, as if I were topping - but I didn't. I basically only do defilia and LST for autoflowers. Unfortunately, the girl reacted to the change in fertilizer dosage during the flowering period and brown spots appeared on a few leaves, fortunately there are really not many of them 🍂. It reminds me of a magnesium deficiency, but it is the only plant that has reacted like this so far. I will try to flush it with Terra Aquatica FlashClean 💦💦 Training: This week I performed LST on the adult young branches by attaching them to the sides of the pot with string, like the others. I also did more defoliation this week to allow light to reach the buds 💚🌞🌞 Light: Mars Hydro TS1000 The plants are responding effectively and the light is technically very well managed - I try to have 50 cm between the light and the plants, so I move it up regularly 💡💡💡 Thanks for the likes :) See you soon 😍😍
Likes
6
Share
@Lazuli
Follow
I defoliated this plant before the pictures so i can really push weight out of her
Likes
15
Share
Alles in allem ein guter strain. Sehr sehr oldschool kushy. Ertrag top. Den cut gibts wie immer bei ROOTS_FARMS. best genetik in europe👌
Likes
10
Share
Wedding Cake Auto is a vigorous growing strain with strong genetics. Do not forget your Cal-Mag. Caution on overfeeding I got lazy and didn't check the runoff the last month and the Ec reading was 2.8. Yikes, not good but lesson learned and quickly rectified with ample flush. Took to topping very well but I'd recommend some training as well to ensure an even canopy as I just let her grow resulting in me harvesting in sections to allow the lower nugs to firm up.
Likes
102
Share
@Aleks555
Follow
Hello growers! I want to share some news with you about our second star, Jealousy-2! This girl has been showing something special from the very beginning. Yesterday, we had to tie up her branches as they started bending under the weight of the buds. But despite this, she continues to thrive, and we hope that over these weeks she will become even bigger and stronger. Over the past week, she has been developing normally, and we have been closely monitoring her growth. Her buddies, who were planted a week earlier, were already harvested yesterday, but our Jealousy-2 still has a way to go. We are not rushing and deciding to give her time to become even stronger. Our plan is to let the trichomes become brown by 50% and even more before harvesting her fruits. We are ready to experiment and observe how she develops. This week, we also decided to increase the fertilizer dose from 1500-2000 ppm to 2500 ppm to give our girl an extra energy boost. She looks great - green leaves, no signs of yellowing, and her appearance is impressive. I invite you all to visit us, evaluate our work, like, comment, and ask questions. We are happy to share our experience and communicate with you. See you on our stream!⁶
Likes
9
Share
Ha sido una buena semana, la temperatura no bajado tanto como la semana anterior, y he regado cada 2 días para que no se estrésen por falta de agua. Solamente a la más alta le hice una poda apical, para trata de uniformar con las demás en altura. Le agregué 1,5 ml/L grotek bud fuel para comenzar a estimular la prefloracion, y aumentare en 2 horas más el período nocturno.
Likes
14
Share
Los Últimos días de vida de la planta ya casi no la regaba, por falta de tiempo y para no generar humedad ambiente, días lluviosos con cortes de luz nos jugaron una mala pasada por eso se decide cosechar, las flores se ven hermosas de colores morados con verdes y amarillos de las hojas más viejas. Un cultivo sin estrés, aplicando productos nuevos y viendo muy buenos resultados. La única decisión mal tomada fue haber lavado raíces tan temprano, podría haber ganado algo más de peso con el monster bloom
Likes
5
Share
@Ninjabuds
Follow
Discount code NINJABUDS: Air cube GROwACE.com Discount code NINJABUdS: ELUfAH Everything looks healthy for now. Nothing big to update yet I have not chosen which 6 plants I’m going to keep yet. I’m only going to keep one plant of each strain
Likes
14
Share
Привет садоводы цветок вырос красивый еще недельки 3 и будет готов бутоны поднабухли и стали более морозными запах приятный сладкий
Processing
Likes
13
Share
Likes
8
Share
Had no issues at all with this girl.. she's growing lovely. I have removed the bigger fan leaves so the lower flower heads can catch up. I wanted yo top her but at this stage I'm not chancing it.. She's actually at 3 and a half weeks. This week maybe early next week she's due to flip into flower. So only good things to come.
Processing
Likes
14
Share
@mrekansh
Follow
So finally some wind breaker some support and dozed them with citygreen's nutes and greens 1ml each in 1ltr And ill be out for a week or two so hope it grows good by then!
Likes
12
Share
@Boomer911
Follow
Growth Overview: Vegetative Stage: Auto Critical Orange Punch developed into a thick and bushy plant with vigorous growth. It filled out its space well, creating a dense canopy of healthy, deep green leaves. Flowering Stage: The plant maintained its bushy structure, with buds developing steadily and gaining significant mass. By the time of harvest, the buds were thick and plentiful, displaying a beautiful orange hue typical of this strain. Harvest Details: Timing: Harvested at the peak of maturity, with the trichomes reaching the desired level of cloudiness and amber. Yield: The plant produced a substantial amount of dense, resinous buds, thanks to its bushy nature and strong branching.
Likes
10
Share
@teabee
Follow
Nice place over all, been a nice vape so far also, definitely grow this strain out again
Likes
7
Share
@603grower
Follow
During this whole grow I would say she was my favorite. She has the fruit funk flora nose and just beautiful bag appeal. Her coals were a lot smaller than the other girls but she was bigger and yeild was similar. I got about 3 zips off of her. I would definitely recommend her
Likes
24
Share
🌱 VEGETATIVE (4 weeks) The Runtz seed, placed in a root-riot cube within a DWC net pot, successfully sprouted by day 4, under an 18/6 light cycle (50W at 50cm). The first week saw the seedling establish itself, with roots extending into the DWC reservoir. During the second week, despite slightly low humidity and temperature, the seedling demonstrated robust and rapid growth. Light intensity was increased to 75W. Towards the end of this week, I removed the first set of true leaves as they were growing too close to the substrate. The third week marked a noticeable increase in the plant's water uptake (1 LT/day), which prompted me to raise the nutrient solution's EC to 1.0. The plant showed significant development while maintaining a compact stature – a trait I appreciated. In the fourth and final week of vegetation, as odors began to emerge, I installed a carbon filter, raised the EC to 1.2, keep the pH in the right range and boosted the light intensity further to 150W. By the end of this phase, the plant was bushy, compact (21 cm height), and healthy. 🌸 FLOWERING (8 weeks) For the first week I switched the light cycle to 12/12 and introduced a new nutrient solution adding Power Buds to the mix. During the second week I was impressed to see preflowers clearly visible as early as day 10 of flowering. So, during the third week I made a substantial defoliation session to manage the plant's increasing bushiness, which I knew would be crucial for later-stage light penetration and humidity control. In the fourth week I introduced a PK 8/9 booster, Green Sensation, thereby increasing the phosphorus and potassium concentration in the solution, water consumption around 3 LT/day. Towards the end of the week, I performed another significant defoliation, including the removal of lower, light-starved branches, to which the plant responded well. During the fifth week the stretching phase concluded, with the plant reaching its final height of 69cm. Its focus shifted to bud development, and the foliage began to adopt a darker hue. At this point, my role was primarily to maintain stable environmental parameters and a correct pH in reservoir. During the sixth week buds were visibly swelling daily, the plant remained in excellent health, and resin production became more pronounced. For the seventh week I implemented a change in feeding, completely cutting the nitrogen from the DWC solution, using only Green Sensation at a higher concentration. In the eighth and final week of flowering (week 12 overall), I performed a complete DWC reservoir change. I filled it with plain tap water and maintained this for 4 days leading up to harvest. On day 56 of flowering (84 from seed), the Runtz plant appeared perfectly ready. The buds were dense and glistening, pistils mostly browned and retracted, and trichomes displayed a good mix of milky and some amber. Immediately after harvesting her, I removed the fan leaves, deciding to dry these as well due to their remarkable resin content. ✅ DRYING The entire plant was hung to dry inside the grow box, which was kept completely dark with constant, gentle air circulation for 8 days. The average VPD during this period was maintained around 1.2 (approximately 20°C and 50% RH). Once this drying period was complete, I trimmed off all the sugar leaves. These resinous sugar leaves will be combined with the already dried fan leaves and larf buds, and I plan to use them to make cannabutter for edibles. ⚖️ Dry weight After the 8-day drying period, and once all the remaining small leaves and branches were removed from the buds, I weighed the final product: The harvest yielded: - 150 grams of dense buds and 5 grams of finger hash. For edibles: - 30 grams of larf and a large amount of fan and sugar leaves. ✅ CURING For the curing process, the dried buds were placed in a large, airtight glass jar. This jar was stored in a dark location within a room maintaining a stable temperature of around 20°C for a total of 45 days. The burping schedule was as follows: Day 1-7: twice daily for 10 min. Day 8-10: once daily for 10 min. Day 11-14: every other day for 10 min. Day 15-21: every 3 days for 10 min. Day 22-30: every 4 days for 10 min. Day 31-45: No burping. 📑 SMOKE REVIEW - At 15 days cured a vegetal note is still quite present and the smoke is a bit harsh, typical for a short cure. The effects are already pleasant and potent, very promising. - After 30 days of curing, the Runtz has improved considerably. The vegetal smell has mostly faded, giving way to a much more defined sweet and fruity fragrance reminiscent of candy and berries. The smoke is noticeably smooth, euphoric effects are dominant. - At 45 days, Runtz has expressed its full potential and is now perfectly cured for daily enjoyment. The aroma is intense and complex, an explosive mix of sweet candy and tropical notes. The effects are potent, starting with an uplifting cerebral euphoria that evolves into a pleasant body relaxation, without leading to couch-lock. 🍕 I also made cannabutter which I used to finish a risotto. The result was insane – both the risotto itself and the potency of the cannabutter were exceptional!
Likes
39
Share
@J_diaz420
Follow
Realmente muy feliz con lo obtenido, 307g en 0.8me me parece genial, estas flores tienen un aroma genial entre el típico haze mezclado con cacao, un efecto muy agradable y confortable, rica al fumar y muy poco picante gracias al lavado de raíces con flawles finish 👌👨‍🌾🏻 Totalmente recomendable esta genética de royalqueenseeds muy agradecido por la oportunidad 👍👌👨‍🌾🏻
Likes
27
Share
1/20/2023- So much to do pre grow and over the next 16 days, absolute first order of business is that I have to take down my current Grow---TIMBER-- Then I have a list of things I have to get done in order to be ready to start this grow 1 Feb. With that said T - 2 days until start 48 hour Flush T - 2 days until Start 48 hours of Light T - 4 days until TIMBER!!! Items that need to be done before 1 Feb 2023 1. I need to clean the tent out 2. I need to clean the equipment- Proper Sanitization between grows in Hydro is a must!!! 3. I need to get the hole in the ceiling above my tent repaired- For my last grow I had a deep sink installed in my grow room, to make Hydroponics a little bit easier and have a water source in the same room. The seals on the pipes they were installing broke and leaked through the ceiling causing some damage all the way across my grow room, I was already weeks into my grow and couldn't risk them working above my tent and it would have been very awkward positon for them to be working in as well, so have to get this done quickly between chop and germination. 4. I have to install my new light- I was using a Vivosun 4000 and for this grow I am switching up to a Spider-farmer SF 7000. 1/20/23- For this upcoming grow I am working with M/F photo seeds so I ordered 4 Sex determination kits. I recieved my my 4 Sex determination testing kits from Rimrock Analytics today. I will be using these to test my plants at week 2 of Veg so that when/if I take clones I know I am taking them off females. As well as I don't want to accidently pollinate my tent during this grow I am looking for big beautiful buds not seeded buds. :-) 1/24/2023- Harvest of current grow- Started at 2:00pm and finshed wet trim and firt batch into the freeze dryer. 1/25/2023- Next batch into the freeze dryer and cleaning all my equipment for this Grow. T-1 Day until the workers are supposed to be here to fix the hole in the Grow Room. T-3 days until I instll my new Gorilla Grow Tent and my New Light Spider Farmer SE-7000 for this grow. T-7 Days until Start of Germination 1/26/2023- Harvest is done ran through the Freeze dryer and dry tim completed. 1/27/2023- Grow Room repairs completed. Hole is gone Letting the paint dry before I install the new tent. T-2 days until Install the New Gorilla Grow tent and the new Light T-3 days until I put the hydro equipment in the new tent T-5 days until Germination 1/29/2023- Day 0- Final Pre Germination activities Germination Start T-3 days The paint on the ceiling was dry and it was time to finish prepping for Germination. I got the following items knocked off my list. New 4X4 Gorilla Grow Tent is up and ready New Spider Farmer SE-7000 Light is installed- Thanks Moony Grows for the suggestion and for the Code that got me some money off and free shipping (Moonygrows)!! I turned the lights all the way up to max and set the timer to 18/6 0600-0000. I will keep an eye on the temperature and humidity without my plants and see how hot it gets with the new light. I put my Hydro system back together and put in 40 gallons of water into it, time to monitor for leaks the next few days. I Setup my cloning machine for Germination Days 3-11 1/30/2023 let me break down the situation, ROOM in the TENT.. Enough said.. No really I tried putting my exhaust system up in the new tent with my new light, The light is so big corner to corner that it really didn't give me enough room for the lights be be raised, with the exahust hanging the buckets my plants are Starting in are 2 and 1/2 feet off the ground, great for plenty of room for roots but not so great for upwards space for the plant to grow. In a 6' 11 tent with the exauhst in side and hanging that only gave me a little over 4 feet of grow room to play with. My last grow if you saw my diary, anyone could tell I was struggling to keep the buds off the lights. No good, Since space was such an issue I was running my carbon filter inside on the ground but It really needed to be up sucking the heat out not shooting the cool out. With that setup I was sucking air through the filter and pushing it out the tent at a bottom exhaust hole cold out. Wasn't doing me any good for my heat. I was hitting temps of up to 85 degrees. I bought a portable AC unit and have been running it in the grow room to try and keep temps below 85 and I have had to lower the power on my lights during grow also not ideal.. With that said a friend of mine MoonyGrows (Check out his diary) took the time to look at my issue send me a picture of my grow tent setup with detailed instructions on how to suck the air out from the top but putting my filter and fan on top of my tent so no room issue and I am sucking the air out from the top where the heat is instead of pushing the air out from the bottom where the cool is... THANK YOU MoonyGrows For taking the time to help me get this straightened out.. Now I have room and I have the exhausts working right and now my temps with everything at 100% are topping out at 80 this dropped the temp by 5 + degrees at 100% max. T-2 days until Start of Germination Prepped my seed tray with humidity dome Prepped my Rapid Rooter plugs. I Used RO water, and I added a few drops of Hydrogen peroxide to Oxygenate the water. I then PH balanced between 5.7-6.0 the same that they will be getting in the Cloning Machine and when they get to thier final grow pod. I perfere the 5.8x range and I hit 5.84 for these rapid rooters. If you want to see a complete video on the process HowWeedGrow has an amzing video that shows step by step how to do it and explains it better than I ever could including how to plant the seeds. Which I will cover when I get to that step on Wed. https://www.howweedgrow.com/how-germinate-weed-seeds-cannabis-rapid-rooters/ 1/31/2023 T-1 day until Germination Start All set and ready have my Rapid Rooter plugs ready to go have my seeds out.. Have my seed tray warming up tonight. Tomorrow morning right into the Rapid Rooter then strait into the tray. I will spray the dome to start the humidity in there. 2/1/2023 Germination Day!! Let the games begin! 0600am Put the seeds into the Root Riots. And then put the seeded Root Riots into their first home the Seed tray. I have them under the light 24/7. Sprayed the dome 7:30pm Sprayed the Dome to keep humidity going on the dome. 2/2/2023 Day 1 of Germination Sprayed the Dome in the morning Sprayed the Dome in the evening 2/3/2023 Day 2 of Germination Roots are starting to come out the bottom of the root riot plugs and the heads are slowly popping out of Number 4 just below the surface. Afternoon- Number 4 has popped up Evening- Number 3 has popped up as well. Happy Dance!! 2/4/2023 Day 3 - Germination Surprise Surprise Surprise- all 4 have now poked their heads up.. Happy day!! 100% Germination succeeded. Now major milestone to track is how many are female and how many are male. I will take look at the roots this afternoon/evening and see if they have enough root to go into the cloning machine for the next 7 days before they go into their Hydro Pods. Day 3 - Germination - Evening.. Roots looked good and they were tall enough to make it into the cloning machine. Now that they are all in the cloning machine I have switched the lighting to veg state 18 on 6 off. 2/5/2023 Day 4 - Germination - Morning All the Ladies (fingers crossed) looking great stretching nicely and look nice and green, Photo synthesis underway.... UPDATE!! After a very interesting POD cast on FSTS by Dr. Bruce Bugsbee from Utah University, I have shifted my lighting to 24 hours on through seedling and then I am going to shift to 20 hours on the rest of Veg. 2/6/2023 Day 5 - Germination While Checking on my conditions inside the new tent last night, I found that the Humidity was down to 39 Percent. I added an AquaOasis Cool Mist Humidifier, the reason I selected this humidifier is that I needed one that could be turned on and off utilizing my Inkbird Humidity Controller IHC200 that I have my Pro Breeze Dehumidifier currently running with. Root structures are starting to get there about 1/4 of an inch. 2/7/2023 Day 6 - Germination Everything seems on track more roots poking out of each today. They are each getting a little taller as well. Checked in the evening and number 3 was drooping the Root riot plug on the bottome was dry and the roots were not in the water yet. I raised the water just enough that the longest root that was sticking out is now hitting the water. 2/8/2023 Day 7 - Germination Everything looked good while checking in on them this morning number 3 is now full up and no droop again. 2/9/2023 Day 8 - Germination T-2 days until Plant into Forever Pods and we start week 1 of Veg .. :-) Surprising thing to me is that number 1 and 2 were later in popping then 3 and 4 but the roots are growing longer in 1 and 2. 2/10/2023 Day 9 - Germination Number 1 and Number 2 are definitely ready for transplant today.. Based on how they were yesterday and where they are today I am hoping by tomorrow 3 and 4 are ready. Today they look to me where 1 and 2 did yesterday.. I really hope 3 and 4 catch up by tomorrow since.. T-1 day until transplant to new/ final home for grow. Need the roots long enough to have some clay down in the basket to keep the root riot out of the water and only roots in the water.. 2/11/2023 Day 10 - Germination Today they got placed in thier forever Home, 7 days from Sprout and 7 days until Week 1 Start. PPM- 180 this is water out of the Tap Temp Water: 70.7 Temp Tent: 77 Humidity: 40% I have a humidifier going 24/7 to try and bring this up.. I also have Humidity Domes on each plant. 2/12/2023 Day 11 - Germination Sprayed the domes, all are looking good.. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-6 days until Week 1 start 2/13/2023 Day 12 - Germination Sprayed the domes, They were looking a little yellow today so I moved the light down to assist. Nothing much to do at this phase but Keep monitoring the PH level in the system and making sure they have a comfortable home. T-5 days until Week 1 start 2/14/2023 Day 13 - Germination Sprayed the domes, They were looking a little Florissant yellow today, with what looks like slight burn on the tips, I talked with a fellow grower and we agreed that It was probably that I was drowning them, Yes you can drown you plants even in Hydro, but only early on.. :-) It usually happens with the water being too high, which soaks not only the roots but the medium (root Riot plug in this case). I lowered the water from touching the bottom of the pot to about 1" away. This will probably take 3-4 days to resolve. I will continue my daily monitoring. T-4 days until Week 1 start 2/15/2023 Day 14 - Germination Sprayed the domes, continue my daily monitoring they look a little darker green instead of lime green now that I lowered the water levels in the system, so I think that I might have resolved the issue but it will take a few days for recovery to happen. T-3 days until Week 1 start 2/16/2023 Day 15 - Germination I looked in on them this morning, 3 and 4 look like they are doing well and recovering nicely. Number 1 not so much it has brown spots on the leaves, this very well can still be a side effect of the overwatering but I decide to go ahead and add Nutes earlier than I was planning just incase. I was going to wait until Saturday but I think intervention is necessary now especially after drowning them early on. I added 1/2 what I am planning on adding for week 1 start. I also think I am going to adjust my chart to add 1/2 2 days after plant from now on. I don't think it would hurt it to have some Nutes to pull from. .25ml/Gal Calmag = 12.5ml 1ml/gal GH FloraMicro= 50ml 1ml/gal GH FloraGro = 50ml 1ml/gal GH FloraBloom = 50ml T-2 days until Week 1 start = I will drain the system and start it over on Saturday with Week 1 Nutes. 2/17/2023 Day 16- Germination I didn't even want to post today after looking in on them this morning, 3 of the 4 are now showing signs of dronwing.. Brown spots on the leaves, the water levels were still too high.. I drained about another inch out of the tanks.. Will see how quick they recover.. I start week 1 tomorrow and will have to ensure my water levels are at least 1" away from the basket on this round.
Likes
14
Share