Emergence. Keep an eye

First time growing! Let’s see how this goes

The first week of vegetation is complete, and the plant is off to an okay start! After spending 5 days in the seedling station, I transplanted it into a 15L fabric pot, which will be its final home since it’s an autoflower.🌱 Initially, things weren’t perfect—the first set of leaves turned yellow, likely because I forgot to add coco to the area where I planted it.😅 However, the plant recovered quickly and is now bouncing back nicely! One hiccup was the time-lapse footage—it’s a bit shaky because the fan was directed at the plant, causing some wobble. Overall, I’m optimistic about the plant’s progress and looking forward to seeing how it develops in the coming weeks.🌱 (the plant in the little pot is my first phenotype Runtz muffin from barneys farm that i got gifted and i am getting the setup right now)

8/2: Everybody is potted up in a 3 gallon pot now. I sprayed them all with Boom Boom Spray one day, and foliar fed with kelp and Superthive all week. They got their first real feeding with TPS One and seemed to like it. I also gave them a little molasses.

Yooo this stuff did great along with the other fast buds girls great grow and on to the next and now to enjoy this fire ass smoke from some good breeders 🔥😎 @fastbuds @originalsensible

The end of the first week above ground..water ph’d @6.5 I will be starting her on DragonFly Earth Medicine nutrients this week.

👉 I started the week thinking I would be harvesting a branch or two a day. I planned on starting at the top with the Queen and just work my way down a little at a time every day or so. This was to allow the lower levels of branches more time to mature to get an even result from top to bottom as far as bud 'ripeness'. 👉So I did start with the Queen. The trichomes looked perfect for what I wanted, mostly cloudy. This Queen cola was not 'typical' when compared to most Auto flower plants Ive grown. It wasnt even the highest of the colas on the plant. It was about the size of a pine cone and frosty. I did a close trim in it and hung it on my drying rack to dry. After one day the cola was placed in a paper bag and hung until its weight was 25% of the original wet weight after trimming. That took two more days and last night it was placed into a jar with a hygrometer. 12 hrs later the hygrometer was at 91% so I opened the jar lid. I will leave the lid open probably all day, may even take the bud out of a while and put on the hanger. It will repeat the process till stable at 62%. 👉 What I found at trimming was that perhaps the flower could possibly pump up a little more. Also it has so many leaves it made me start to hate leaves. I that made me conflicted because leaves are why everything happens...food factories. I could see the issue before I got close to harvesting and I am happy I didn't go on a massive defoliation campaign. That wouldn't have helped the sugar leave issue. I have been taking leaves for a few weeks now even though it may be hardly noticeable. It took a long time to do the type of trim I like. I avoid snipping calyx's as much as possible and will snip as many sugar leaves as close as I can. The rest of the harvest of this plant is going to be penance for just a few of the thoughtless or stupid things Ive done in the past...a trim purgatory that is going to be close to trim hell. But if the end result is as good as the white widow Ive had in the past, it will be pain worth enduring...if its a dud that tastes like grass because of all the leaves then I will learn how to make extracts. Almost always a bright side with cannabis. 👉So I will continue lots of pre-trimming any large sugar leaves on colas around the top and work my way to the bottom. I will also continue nutrient laden fertigations and get a little more plumpness of the flowers to offset the leaves. The plant is still thirsty and I see new calyx's on all the buds. I'm going to mix my nutrients between the late bloom mix and the ripen mix, with extra Flora Bloom, and extra KoolBloom.

Alright Then We just hit week 1 and all is well , have to admit she's ahead of all the others of same age , nice Growth in just 7 days😃 ....... Middle of week I decided to start a little training by pulling her over to the side 👌 Very little water given ,so far and rain water to be used entire growth Lights being readjusted 👉I WISH GD HAD DISCORD SERVER SO GROWMIES COULD HAVE A PLACE TO HELP AND TALK THINGS RELATED TO GROWING .....👈 👉SO I CREATED ONE ALL YOU NEED IS TO JOIN THE GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 2/26 2nd week of flower!! These ladies are still in the middle of their stretch, we're feeding mildly with every watering at this point..their color is perfectly uniform and with a few changes to our exhaust system, temps are now perfect around the clock..bud sites are just beginning to form this week and we intend on dropping the MarsHydro a few inches around week 3 after defoliation and removal of lower growth.. or cross (tucked behind the Bangers) are growing fast, no sign of males or hermis yet 🐱🤞... thanks for reading if you made it this far and happy harvests everyone!!❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Well this week was a huge learning curve, shoutout to @jinks101 for being a great mentor and helping me with these two girls. SO I think it's nitro toxicity or they needed nutes. My soil only has nitrogen in it, and after reaching out to the company I learned I need to supplement more. They are lanky af, but I also think having my light not as close for sure did that stretch. I;'m not really happy with these two but it's my first autos and first grow in general. They are starting to show pistils. The first sets of fan leaves are basically a write off due to the curling, but the last sets so far hasn't been effected. I will continue to give them nutes and keep my eyes peeled. PH of soil, water and runoff all good, RH is 50 % ISH fluctuates a little bit but overall steady.

Chopped!

Day 1: A large root can be seen at the bottom of each cell pot. Filled 3x 3 gallon pots with coco perlite 60/40 mix and transplanted each seedlings into its forever home. Not messing with micro-bacteria and all this time round as the nutes have everything that’s needed, fresh coco and a good feed will be more than enough for these girls. Watered them each with 100ml of water mixed with with a small amount of Velokelp and stuck a bag over each to lock in the humidity. Once the transplanting was over I setup a little DIY drip irrigation system with a 10L reservoir. Feeding schedule will be at 1/4 strength of advise dose as recommend by FastBuds and Remo Nutrients. Set up the timer for the lights and drip irrigation system to kick in tomorrow. The lights will change to 18/6 and drip irrigation will kick in just after lights on. Day 2: Lights turned off for the first time after 24 hour light for the past few days. After 6 hours of darkness the seedling are looking healthy as fuck. The first true leaves are now developed and they’re all bright bright green. Drip irrigation timer did its thing for the first time today and I’m well happy with the result from my little DIY kit, hopefully all runs smoothly with it for the rest of the grow. Day 3: The cotyledons have started praying upwards towards the light. The bags over the top of the plants have a good amount of condensation on the inside so I’ve cut a couple small holes in the top of each bag to let a little air in. Turned drip system off for a couple days to avoid over watering. Day 4: Tiny second set of leaves can be seen in the centre of each plant. Made the air holes on bags bigger to get the ready for them to be removed. Drip system still turned off. Day 5: Drip irrigation system is working as it should and environments holding up so all is good. Plants are looking good and seem fairly well rooted. Removed the bags from the top of each pot and turned on the humidifier and set it to 60%. Only thing left to do on this setup up is get some trays under the pots so they’re not sitting in puddles during the feeds. Day 6: All of the plants first true leaves are praying up to the light and the second sets are starting to properly develop. Really happy with all the seedlings so far. When it comes to autos these seem like the business. Fans turned on today and drip irrigation set back on its timer. Found some old metal grilled shelves that have worked out perfect for trays for the irrigation. Day 7: Second set of leaves are beginning to rise up, another week I reckon and I’ll look into hanging the MH bulb so these girls can explode. Very happy with these seeds so far. Gave them their first foliar spray with a 5ml of Velokelp and 5ml of Magnifical mixed into 1L of water. Turned the oscillating fan up a notch too as I’ve got it set up a fair distance away and I didn’t feel the breeze was catching them enough. Mixed up a new stronger feed this evening so it’s read for the droppers coming in tomorrow.

It looks so good the purple is so dark it’s black. Super frosty very pungent aroma. I’ll post the final weight in a few weeks. **Jjust a quick update - dried weight after 21 days from the chop 410 g. Not bad considering the light was only used for flower. Can’t wait to get a full cycle with this bad boy. **

Buds and sugar leaves started to get more and more trichomes. Some pistils are turning amber/brown, mostly in the tallest colas. I'm slightly worried about the distance between lights / flowers (~16-17"), but so far they don't present any symptoms of light burning. There's no vertical room left to bring the lights up, so I really can't do anything in that matter, just hope they have stopped growing lol. I'm also about a bit worried about the amount of leaves. Not sure if I should do some prunning or leave as it is.

Harvest Time of Fast Version B Strain and Welcome to : -Designers Club - Special Thanks to John for hopping through my Messages to Join The SSSC/DP Photo C8ntest The Project was Supported by Narcos Seeds to give the Strain the Perfect lifespan it could Deserve . Light used for The Contest Grow : Tenty Pro x4 200w in a space of 60x60 Homebox Ambiente Tent. Preparation Before Harvest : 5 Days without Feeding / 2 Days of them Complete in the Dark . Enough Talk from me , just Enjoy youre Seats and be a part of The Designers Club . Good Luck to Everybody and Keep up Growing !

At the beginning of the 2nd week flowering I started to defoliate and have tied down the 8 main branches of one of the strains, looks very funny like a "Circle of Buds" 😁 but now struggeling with the mass of new branches...