.

Oh well, not my (our) week 🙄 During the week the Ladys start to look a overwatered and I had no idea how this could happen ... Well, first I tried to rise temperature slightly and had the fans run more often to dry them out a bit quicker, did not work. Than I took them out of the System ... All together worked, at least it looked so ... for 1 day ... Yesterday I found the real reason. The Humidity Controller was broken ... During the night they had around 90% humidity and during the day only 25-30%, way to high and way to low. Replaced the Controller today, hope next week will start smoother 🙂 Beside of this they made huuugggeeee progress, some nearly doubled in size and are around 5-6 Nodes now, will top them all next week when they recovered a bit 🙂 Also added some Alfaboost to help them a bit. In the Video the Candy Caramelo are on the left 🙂 Thanks for your time, I hope you enjoyed this entry 🙂 See you next week 💚

COMING SOON!!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

:)

07/23/24. Going into week 4 flower Not much to report on this week. Slow going pretty much so far, but starting some bud growth now. Stretch seem done, though it was minimal surprisingly. Most bud sites are sitting right below the trellis lol. Have spotted an angry leaf. Looks like potassium deficiency, so I’ll be upping a tad and see how it goes. Haven’t changed anything else since last updates.

Wikrlich schöner Start bei der Milkyway F1. Habe in der Mitte ausschließlich light mix, außen ist light / allmix und etwas wurmhumus gemischt. Außerdem habe ich bei 40litern insgesamt 20g dolomitkalk drin. Wird später noch wichtig

Week 8 begins for Green Crack. She has a pungent smell that is a mix of fruit and chemical. Last week of feed before flushing. Thanks for stopping by, tune in next week! 👽🌳🔥

Firrst week of flower has gone well switched bulbs to 12 12. nice heads starting to pop up during the end of week 2

Dropped the 3 seeds in water bath with a little HESI rooting mix, little mycorrhizae. On a heat mat, covered for complete darkness. 24 Hr soak - then seeds moved into own Seed Germinator - Karl’s Bubatz Popper 😂 24 hrs after 22 degrees and 90-95% humidity seeds developed long enough roots to hit the soil. To avoid any chance of damage the cotton pads hit the soil too.

Transfer to 3-gallon pot

Week 5 of

Hi, topman! So, I think it’s strain was really good, how his F1 family! But, Titan F1 - so good the same! See you in next weeks report and harvest report. >>

Day 35 start week 6 Pretty much everything stayed same. They are starting to run out of room in tent.

Pruning, defoliation and only water for the taste

Week 8 is over so 3 more to go approx. see fattening by the day. But bad fungus gnat infestation on the god

Day 29/19 — Began LST on CDLC B; Optimizing light penetration — Environment stable — All plants looking great — Vibe: 😇 Day 30/20 — Topped CDLC B — Plants still praying — Vibe: 🙏 Day 31/21 — SSxDG A/B Topped — Vibe: 😎 Day 32/22 — CDLC A LST on the stems — Environment stable — Cleansed the space with the sound bowl — Vibe: 😇 Day 33/23 — LST on all ladies started today — Added crystals to the soil for each girlie. — Vibe: 👽 Weekly Avg Readings — Lights 18/6 - Level 7 — Temp: 70 (ideal) | 68.9 (avg) — Humidity: 60% | 59.0% — VPD: 1.00 | 0.97 kPa "Perserverance is not a long race; it is many short races one after another." —Walter Elliot

6.1. - Plants are looking very good. First branches are already developing, so I guess I will have to start with LST soon. 8.1. - First branches are shooting out, leaves and plants overall are getting bigger. I hope they'll keep this tempo and health. Watered. 9.1. - Today I've decided to apply some LST and I accidentally snapped off the main stem of one Creamatic. I've fixed it back with tape, but not sure how it will end. 😔 10.1. - I've checked the broken plant and decided to remove that part. Plant already started focusing on the branches that are left, so basically one plant was topped unintentionally ✂️ 11.1. - Week wrap-up: Well, this week was half fail half success. Plants are growing fast and healthy, however I've managed to fuck them up a bit as usual. One accidentally topped plant and one with broken but healing branch. I've decided to give up on the LST of main stems completely. I will let them grow up and just spread the branches with wires. Hope next week will be more successful ✌️ 5.1. - 11.1.2024