I use mycorrhizae.

Flowering well, she as stretched out a bit, steady progress. Currently looks like lots of bud sites but hard to tell how much it will fill out.

7/6/2021 - Trimmed lower fan leaves as they were being blocked completely, and a few tips were yellowing. - Continuing to lightly bend the upper branches so the lowers can catch up. - Bought some Gaia Green veg + bloom dry fertilizers as I expect I'll be flipping to flower soon. 7/7/2021 - Watered in a little bit of Gaia Green's veg fertilizer. - Foliar fed w/ DIY kelp extract. - Yellowing/browing on a new leaf, can't identify what it is. - Staked down the branches on the upper mains this evening to open her up for more light penetration, she was gettin' real bushy. 7/9/2021 - Trimmed out middle to expose canopy

Finally got the big tent and got the environment dialled in. With the AC in the tent, it's way more stable now; this also means I can close the distance between the light and the plant and she's definitely growing better.

Cali Crasher is doing great. She is still bulking with some nice big colas. She has a nice layer of resin on her as well. Everything is going great under the Hortibloom Solux 350. Thank you Hortibloom, and Doctor's Choice. 🤜🏻🤛🏻💪🏻❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

13 jours de 12/12 OK il y a du changement ! Dans la partie du scrog vertical le stretch n’a pas été assez fort J'ai donc abandonné la culture verticale pour cette fois J'ai donc fusionné le bas de la tente pour avoir un espace de 90x60x90 Le ts1000 a été retiré pour laisser la place aux barres du FC-E 4800 Et bien sur gros LST pour gagner en surface et gagner 20 à 30cm de hauteur 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 20% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 50% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan 🏠 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 3️⃣ Sponsorisé par Mars Hydro

Definitely 2 different phenotypes with the Girl Scout cookies, one is Oozing great with nice big well stacked buds the others are spindly and airy. Hoping they will thicken up over the next 3 weeks. The white widows are all looking ok. Had a valve blockage on one of the pots which I luckily found early. The Autopots always seem to give me grief in the flowering stage! Blocked lines blocked valves, flooding. I’m now making sure I take out the valves and reservoir and give them a good clean and rinse every 2 weeks.

Day 36 1/13/25 I think she is taking to the location okay so far and after the first cut I did I’m not sure what I’m doing I’m just doing my own little mainline thing experimenting I guess I’m using APSU super soil and a little bit of build of soil 3.0 left from last grow and it’s a 7 gal pot als 1/14 day 37 Did second and final topping going allow about two weeks to bounce back and allow more growth and LST then flower

Amazing strain, very easy to grow and hope to do do more Royal gorilla auto in the future and see what else RQS have to offer. Absolutely solid buds and potent asf. Taste is 9/10. thc I would say 20%+. I also used terpinator in weeks 7 and 8 at a rate of 4ml/l which I didn't list in my diary. I'm sure this contributed to the density of the buds. I will use terpinator alongside advanced nutritions range for all future plants.

Week 8 begins for mandarin dreams and divine storm. All four ladies are frosty, sticky and the mandarin smell is incredibly strong. I love how these girls look and are growing under the TSW2000, they look better than round 1, grown under my own custom Samsung strip's. Thank you Mars-Hydro for the light! Thanks for stopping by growfessors 👽🌳💚

6/13/2023 Week 10- Day 1 of Flower (Day 131 overall) (Day 70 of Flower) Auto Pilot Day 6.. Checked the Trichomes and the bud density and both are looking good.. Definitely needs a little more time for the Trichomes to be where I like, so based on my check I think we are still looking right around the end of the competition 22June to be done and ready for harvest. I do like that the fade is coming in the leaves nicely, so my chart I think is dropping off the Nitrogen exactly like it is supposed to. 6/14/2023 Week 10- Day 2 of Flower (Day 132 overall) Auto Pilot Day 7.. Decided I would take some contrasting pics today with my light up to 100 and my light all the way on Dim. I hope you enjoy the pics. 6/15/2023 Week 10- Day 3 of Flower (Day 133 overall) Auto Pilot Day 8.. Decided to take a look at the Trichome's today and Check to see where they are at and honestly if I might ho ahead and start my flush tomorrow and harvest on Sunday. 6/16/2023 Week 10- Day 4 of Flower (Day 134 overall) (Day 74 of Flower) Today I pulled an Armageddon however instead of darkness they are going to get 48 hours of light. The reason why they are going to get light instead of dark is when I was taking out the netting a lot of the buds were so heavy they fell over and exposed some areas I really want to get some light to... so 48 hours of light at 40% while I watch what should be a beautiful final fade as the plant eats up the last Nutes. If anything goes wrong I can abort take the photos and cut so will pay really close attention to how it is looking over the next 48 hours. Added 30 Gallons of PH only Water. Reduced Lighting to 40% removed program time off. 48 hours of light. 6/17/2023 Week 10- Day 5 of Flower (Day 135 overall) (Day 75 of Flower) I had someone tell me that a few growers had done as I did and Gone Armageddon on the plants. Filling it with PH only and said the plants did not respond well and they were taken out of the comp at the very end because they felt like the pictures just wouldn't come out right. Even though I did go Armageddon, The PPM is at 353PPM with the residue of what was left in the buckets after draining as well as what I am getting from the TAP so I think they are doing good but I am checking them every few hours to see how they seem to be doing and I think they are doing good still and are on track. I also started prepping the area for the pics tomorrow T-24 Hours until Chop 6/18/2023 Week 10- Day 6 of Flower (Day 136 overall) (Day 76 of Flower) (Harvest Day) What a day.. what a day.. what a day.. as I was setting up and trying to figure out how I was going to get my pics #3 stems started breaking, it fell over and other stems broke.. So no really stunning competition photo for her, she had such a nice purple fade.. #2 stayed up in the Tent so that is the one I had to go with to submit for the contest. I wet trimmed them as they went into the tent and they took up three rows hanging in tent. I also decided I wanted to try some so I put a little in the freeze dryer for a 48 hour smoke test.. I will weigh it and add that to my total weight for the plants when it is all done.

31 Aug. I start the third week of my autoflower. The plant is growing well, but I noticed small yellow spots on the leaf tips, which seem like a mild calcium deficiency. This is probably due to the fact that so far I have been giving water with a slightly low pH, around 6, while the ideal range would be 6.5–7. At the beginning, to lower the ppm of the tap water (which was around 211 ppm), I mixed it with demineralized water. This brought the ppm down to about 109–140, making it harder for the plant to absorb the available calcium. Additionally, the soil I am using, Biobizz Light Mix, is lightly fertilized but does not contain enough calcium to correct this small initial deficiency. For this week, I will not add any fertilizers. I simply want to raise the pH to 6.5 and use water with higher ppm, so the plant can better absorb the nutrients already present in the soil. The lamp is positioned about 35–36 cm from the plant and so far there are no burn issues. Temperatures range between 25 and 30 °C depending on the day, while humidity in the room stays between 40–60%. The humidifier is always on because I keep the window open, but the dehumidifier is not being used, as it is not necessary at the moment. I also have a new oscillating fan arriving to replace the current fixed one, and I’m waiting for a regulable extractor (90–145 m³/h), which will allow me to control the air perfectly during winter if needed. This week my main goals are: Increase the water ppm without overdoing it Adjust the pH to 6.5 Keep observing the plant without adding any fertilizers Everything else seems fine and growth is regular. With these corrections, I expect the new leaves to grow healthy and free of spots. ==UPDATE 31/08== To control the calcium deficiency, I will administer an eggshell solution until I reach 300 ppm (I will boil some eggshells and administer the solution in tap water).

Day 69 - Very glad I decided to leave these because all the buds are still fattening up on both these ladies and both smell amazing & are super frosty! Extremely impressed with all 3 strains so far can’t wait to get some more Doctors Choice genetics🔥🔥 Thanks for following & happy growing friends!

Did abit of chopping this week still abit to go, been looking at expanding this spot to try get few more plants down. Both plants looking healthy, the ny diesel is getting big now, as the cheese has got more closer node spacing. May do abit of lst this week coming as shouldn’t be long before pre flower. That’s all this week, happy growing 🌱

The time is coming. It's very healthy, I ended up exaggerating a little bit with the fert, but don't panic, it's organic, it caused just a little burnt on the edge of the leaves. The weather is stabilizing, it stopped raining here and the humidity is normal now. The pistils are starting to fester and are resining too much. She is very fat, the smell is strong every day and I am totally in love with her.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

💚Please Like This Diary and Leave a Comment!💚 pH @ 6.8 Plants grow nicely and are strong! No Nutritions until flowering start. Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💸💸💸Wanna Try Red Wine from Seeds Genetics?💸💸💸 https://seedsgenetics.nl/product/red-wine-gefeminiseerd/