Moving these photos into an album for tester #1 by itself. Originally 3 blind testers were grown alongside other photoperiod plants. Lights were flipped to 12/12 on that grow at the 4 week point (10/12/22). Since that time, some other plants gave been culled and 2 of the blind testers turned out to be autos. This plant is still very small with very tight internodal spacing and it has not shown any preflowers. I have decided to restore the 18/6 lighting schedule to the grow room. This plant can continue to veg, to mature and grow larger. I’ll acquire a tent or figure something out to finish her later. For now she is vegging along. I’ve defoliated and manifolded her. I’ll document her journey here in weekly posts going forwards.

Nutrients are a mix of multiple brands. Some nutrients are hydroponic specific and some are soil specific. On to the next grow: https://growdiaries.com/diaries/61723-gorilla-glue-autoflower-mk-ultra-grow-journal-by-gorglue Thanks for stopping by!

I mean, overall this was an extremely painless grow. The test of whether we should or shouldn't top autos is still TBD imo. Our topped candidate produced denser, frostier buds, but weighed slightly less, at 14 grams of bud total. And our lst plant produced 18 grams of bud, not as frosty, and almost as dense as our topped girl. I'll be topping autoflowers from here on out only under the circumstance I have 4+ to grow at the same time. Seems like it could be used to speed up the autoflower grow cycle if done properly, like with right. Since I'm doing a perpetual cycle, it's still a viable option for me in the long run. A few tips I have for anyone growing this strain in organics: Start feeding bloom nutes a little bit prior to flower transition - this makes the transition more seemless. From weeks 1-3 flower, I slowly dropped the grow dosage until I cut off grow nutes week 3 flower. Starting the flush around week 6 flower seemed to really bring out this plant's potential. But I think you could get away with starting the flush around week 5. I hope this helps anyone trying this strain out. It's a good one, I hope to see more journals of it, eventually. Cheers everyone! Time for me to take a well-deserved puff. :) ☁️ 🌼

wish i started this on day one

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

На этой недели решил чутка перейти к крайним мерам, пришлось удалить короткие и кучнистые ветви на которые попадало чень мало света, посмотрим как пересёт такой стресс, всё идёт замечательно)

Hello everyone! I transported plant to final bucket! i add nutrients, the Trichoderma and the Mycorrhizae Ec solution up to 10ec a everday. i pour pure the water, This is down Ec ph stable 5,8

Dealt with pm issue why I havent posted. Its gone. Fed compost tea, fpj, and foop. Also hit her with some mykos. Im already getting iny head when I want to begin amemding this for rhe next round

Day 13 of flowering : we are starting to see the pompoms appear 🏵️🏵️🏵️

Had to battle some mid july heat and humidity this week. Have the lights down low and the ac at full blast. Plants began to foxtail due to heat, so some of the colas got a bit of a snip and one main slurricane cola was bent at 90 degrees because it was just about to touch the lamp. The room STINKS!! outside has a noticeable pungency to it, and I love it. I gave my neighbors clones in May to mask the smell with more stank Feeding with reg nutes + sweetener + hardener. Flush in a few weeks Thanks for looking

So just water now for a while as I think it's done. Small amount of Amber on the trichs. Might chop on boxing day. Foxtailed hard near the end, dunno why lol.

Week 4 come along and lady's doing pretty well I keep do lst every 2 days and just feed them with water willing to use nutrients soon Day 25 I just start give them grow and calmag plantvare almost ready for flowering

Comenzamos con lo nuevo *.*👏🍓

All looking frosty around day 42 of flower! Just been on water for the whole of flower! Watered with aact as well every other week but real happy with this run!

Week 6 Flower Up until flush, she was only given PK, sugars and sweeteners, and the microbes (listed above). Everything else has been stopped to ensure a proper flush. She started her flush on Day 40 as I want to get a nice fade on her after a long flush. My girls are in coco and perlite, in fabric pots sat on benches so they dry out within 2 days. Because of this I can flush a lot of water through them without overwatering. Infact, the amount of water I put through them doesn't make a difference to how quickly they dry. Good air movement around the pots also helps them dry, and stops any stagnant air within the lower half of the tent and within the plants, preventing any moulds. When flushing, I first feed just enough water to create a run off into the tray so I can read the ppm and pH value. Doing this lets you know how your plant has been performing; whether she's been way off in pH and locked out by having a high/low pH and high ppm, or if she's been doing just fine with a pH range within tolerance and around the same ppm value or less than you've been feeding. This girl was in perfect health, with a good pH and ppm. After that, I flush up to 30ltr and then take a second reading from the last bit of run off. The ppm is the main thing I look at this time, to see how low I've taken it from the flush. Personally, I find the girls fade much sooner, and more overall by doing a bigger flush as it takes almost all of the nutrients out of the coco within a few days. That leaves the plant with nothing but her own stored nutrients to feed on for the next 2+ weeks. A better flush means a better, cleaner smoke. She's stacked up and swelling by the day with huge buds. Not the frostiest strain I've ran, but still covered in trichomes and extremely strong scented. She smells of mixed berries and grapes 🍇 I can't wait to try! Thanks for following and happy growing! 🐺

ฉันเพิ่มสารอาหารตามตารางเนื่องจากเหลือเวลาไม่มากแล้ว

Whoops, power went off in the shed, plant has been in the dark for 5 days basking in high humidity! Silly me

LJ 2Q24 Flower Week 6 Start of Week: - [Sun Aug 4, 2024, LJ 2Q24 36:F:6:1] - Plant Heights: [ 25, in] End of Week: - [Sat Aug 10, 2024 LJ 2Q24 42:F:6:7] - Plant Heights: [ 26, in] EC: 2.4. # Until Week 10 __ Sun Aug 4, 2024 LJ 2Q24 36:F:6:1 Add 7.5 ml of Dr. Zymes to 1 PT of Last Two Plants Feed (Ran out last night) THIS CHART FOR WEEKS 7 - DEHU Water, Reducing Lush Green (N), Eliminating Root Anchor + PSP, 1 Drop Beauvaria Bassiana Soluble __ Mon Aug 5, 2024 LJ 2Q24 37:F:6:2 RLA Week 6 +BioAg TM-7 Nik wonders if it might actually be a molybdenum deficiency w/ Lemon Jeffery. __ Tue Aug 6, 2024 LJ 2Q24 38:F:6:3    Environmental: - LightIntensityAvg: [ 836, µMol/m2/s] - TempAvg: [ 78.4, °F] - RHAvg: [ 65.7 , %] - VPDAvg: [ 0.90 , kPa] - EC: [ 2.4, mS] Note: - Nik @TheRootedLeaf mentioned Molybendum as an ESSENTIAL µNutrient participating in Nitrogen Reduction. - The BioAg TM-7 contains Mb, Apply @ 1 tsp/gal  __ Wed Aug 7, 2024 LJ 2Q24 39:F:6:4 __ Thu Aug 8, 2024 LJ 2Q24 40:F:6:5 Note: - We really need at least 2 Fertigations/day, @2000 & @0130 - We’ll water to saturation each event (10% Pot Volume, 440 ml/plant/event) - We need 440 * 2 * 7: 6.16 Liters,Need 1.62 Liters, Will mix 1.75 - Need to increase daily total from 1.5 to 2 Gallons - 1.1 L/Plant/Day - 440 ml/plant/event * 2 Per Event - Estimate Minimal Runoff - Pot Size 4.4 Liters - Saturation: 440 ml - 0% Runoff 1.75 Gal, 5700 ml, 814 ml - [x] Light Defoliation (as needed/lowers) Feed Chart for 1.75 Gallons Apply 440 ml/plant @ 2000 & @ 0130 - [x] Mixed! 2024-08-08T16:03:01-0500   __ Fri Aug 9, 2024 LJ 2Q24 41:F:6:6 - [ ] Collect Dehu Water - [ ] Water 440/plant @ 2000 - [ ] Water 440/plant @ 0130 880 ml/plant/day * 7 : 6160 ml, 1.62 Gal __ Sat Aug 10, 2024 LJ 2Q24 42:F:6:7