Recommended
Likes
Comments
Share
@Jaschkoo0
Follow
On Day 127 i harvested a few buds from the right plant because she had perfekt condicioned trichomes and a lot from the left because i dont want to risk more mold.
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. She started germination Monday 14/10/2019 straight into the soil, after 3 days she turned into a little sprout. 23/10/2019 - Struggling a bit to maintain good veg RH (55-65), currently between 45-50, humidifier on the way. PH was also to high about 7.5-8.0, already fix it to 6.5, with a drop of lemon juice. 24/10/2019 - Noticed little flies on the tent, going to add sticky trap.
Likes
10
Share
@KcKush
Follow
*Ppm stayed the same around 1050PPM * Week 5 of flower. *Nothing drastic changes just defoliating a little. Did remove some popcorn nuggets on the bottom. Wonder if that will affect yield.
Likes
61
Share
Had one plant hemi, probably due to the high stress training I did last week. All plants looking very healthy, two out of the remaining 4 are several inches taller so may tie these down to even the canopy a little. One pheno is a lot more sativa looking than the others and had a much bigger stretch.
Likes
57
Share
Auto Lemon is sooo close to harvest now! Gave her Recharge only this week. All trichs are still milky white, no amber yet. Once I start seeing some amber she'll be coming down.๐Ÿ˜ƒ
Likes
23
Share
Turned out amazing still hanging for a week. You definetely need a carbon filter for these. No pests or disease, eady to grow . She will eat everything you give her ๐Ÿ’ช. 2 distinct Phenotypes. All have dense buds dripped in resin. Responds very well to lst and topping once. The only bad thong is there is a phenotype that is very small and not on par as the other two huge difference. Loving it. Learned alot.
Likes
10
Share
4ยช settimana di fioritura alla CAMPACAVALLO per la Black Muffin di SweetSeeds ๐Ÿ’š๐Ÿ˜๐Ÿ” Di piccoli peni ๐ŸŒ non se ne vedono piรน... Ed i bud si stanno gonfiando alla grande๐Ÿ˜›๐ŸŽˆ Beve ๐Ÿบ propio tanto in questa fase di crescita ๐Ÿซ ๐Ÿ–คLa CampaCavallo manda un grande abbraccio a Valencia ed alle persone colpite dalla maledetta alluvione๐Ÿ–ค
Likes
65
Share
Flowering day 87 since time change to 12/12 h. Hey guys :-) The Grinspoon blooms and blooms ๐Ÿ˜‚ She keeps getting new pistils but the trichomes are starting to turn milky :-) . I think it can be harvested in the next 14-20 days ๐Ÿ‘. Would even be a faster phenotype this time :-) The last one had 136 days. Was poured 3 times with 1 l each (groundwater see description at the bottom) Everything was made clean. Fresh osmosis water is applied and the plants are sprayed and checked. Stay healthy ๐Ÿ’š๐Ÿ™๐Ÿป ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ๐Ÿ‘‡๐Ÿผ You can buy this strain at : https://www.barneysfarm.com/dr-grinspoon-5 Water ๐Ÿ’ง ๐Ÿ’ง๐Ÿ’ง Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Processing
Likes
15
Share
@AK1210
Follow
The tricombe production on this strain is ridiculous! It looks amazing under my microscope. The heads are mostly milky coloured so this may be finishing sooner than expected. The space in the tent is getting a bit tight so I'll be glad to have more room when this lady has done her thing.
Likes
28
Share
So far, everything is developing well. The Bruce Banner has been lollipopped, perhaps a little too much, but let's wait and see. I trained the S.A.D. #4 with plant clips, as three shoots became too dominant. This worked very well so far and the other shoots caught up well. I also noticed that the Bruce Banner was getting slightly yellow leaves. I don't know the exact reason, but it may have been due to the low CalMag dosage in the previous weeks. I also noticed an infestation of fungus gnats, nothing serious, but today I watered with nematodes and this problem should have disappeared.
Likes
4
Share
@UrbanBoer
Follow
Finally A successful process I can finally harvestโ€ฆ ๐Ÿ˜ญ 1 of 6. When I thought an Auto, turns out got myself a traditional 6 month seed to harvest, she got a whole month of flushing, want that smooth smoke, besides presentation it must the smoke must be subtle on the throat. She just fooled me with her flowering, she has truly took her time maturing. Next week I am harvesting, and I will definitely post my experience, and how I dry and cure my harvest.
Likes
31
Share
23/5* Water day 275ML with Biobizz Grow and Fish-Mix -Temps 24-25 Day / 21-23 Night -Humidity 70-75% RH Correction to LST / Letting the bigger restraints go 24/5 Freed them of LST as i want to let them grow higher -Temps 24-25 Day / 21-23 Night -Humidity 70-75%RH 25/5 Showing good growth -Temps 25-27 / night 22-24 -Humidity 70-75%RH 26/5* Water day 275ML with Biobizz Grow and Fish-Mix as usual -Temps 23-25 / night 22-24 -Humidity 70-75&RH 27/5 - Got my humidity controller -Temps 23-25 / night 22-24 -Humidity 72% (+-5) 28/5 - Did some super super cropping and a bit of light "Chiropractic" (Kyle Kushman method) and a bit of lst on the branches i wanted to get more light -Temps 24-26day /22-24 night -Humidity 72% (+-5) 29/5 Water day* As a first time, i watered them before they went to bed, as i wanted to give some nutrients to get over the supercropping stress 275ML (+ 2ml/L Fish mix + 2 ml/L grow) -Temps 24-26day/22-24night -Humidity 72% (+-5) ***********I will put them into flowering in about a week*************** Light to plant distance: d.28/4 53 CM to light (kept the same distance rest of the week 1) d.2/5 50 CM to light d.3/5 42 CM to light d.7/5 40 CM to light d.19/5 38 CM to light d.22// 34 CM to light __________ My lights distance and PAR value: 24" / 60 CM = 237 PAR (umol m2s1) 18" / 45.72 CM 412 PAR 12" / 30 cm 811 PAR 6" / 15.24 CM 1816 PAR
Likes
10
Share
@coriander
Follow
Flower is in full effect. Day 43 - LST just to pull some little stuff up into the light. Day 44 - 3 cups clean PH: 6 T:20ยฐC Day 45 - lots of bud sites starting to explode Day 46 - seeing some yellowing tips with brown spots like last grow. Positive that the light is getting to them. Moved light to 23" Day 47 - 6.5 cups of nutrient solution PH: 6 PPM:479 T:20ยฐC Day 49 - bent down the main cola because it was creeping up too high and I didn't want it to burn. It was really nerve-wracking. Thank God it didn't snap. Opened it right up too! So many bud sites on this plant. Getting excited. Thanks for stopping by! ๐Ÿฅฆ
Likes
40
Share
Hello my friend, ...April 12, 2022..Day Nยฐ22... First day of the fourth week for my 2 Feminized Runtz Gum, 2 Feminized zkittzy Gorilla and 2 Feminized Banana Sherbet. They are fine and they growing healthy. Two days ago I topped all of them. My babys are under a Mars-Hydro SP 3000 at 25% of power and at 60 cm of the canopy. www.originalsensible.com www.mars-hydro.com That's all for now my friends, thx for passing through here. Wish you the best with your green projects. See you soon..๐Ÿ’จ๐Ÿ’จ๐Ÿ’จ
Likes
15
Share
harvest was 3 days ago on day 131 total and 63 days off flowering, harvest report coming soon
Processing
Likes
4
Share
@Stick
Follow
In my quest for the perfect modern grow room, I got my hands on a super cool device: SensorPush. Each SensorPush is a tiny low-energy-bluetooth thermomether+hygrometer. I have 1 sensor in the indoor tent and 1 sensor in the outdoor micro greenhouse. Both are connected to the "SensorPush Wifi Gateway", allowing me to access to the datas at anytime from anywhere in the world. SO COOL! I started to collect datas more than a week ago and it has been already so helpful, I noticed that every single adjustment (side fan speed, thermostat mix/max, window opened/closed, driver dimming..) has a direct and immediate impact on the environment, and being able to see the detailed live statistics is the perfect way to adjust the parameters. I had one important issue this week: my timer was acting weird and the light was turning on 40 mins while the plants were in the middle of their night, but thanks to SensorPush I was able to notice the problem immediately and fix what could have gone dramatical. I love these sensors so much that I've started to dig into the SensorPush API, and guess what: after a few minutes I was able to get the datas showing up on my webcam feed, so now my webcam app is also showing me the temp+RH! SO COOL! Thanks for stopping-by and stay tuned for more big-data ๐Ÿ˜Ž