Likes
Comments
Share
I harvested the Indoor-Lady last night! Removed all the bigger leafs and did a little more cleaning, but avoided to cut the flowers/buds. Growbox is a nice place for drying, humidity stays below 60%. Temperature is a little bit to high (25*C) but that seems to be OK, considering that we have Outdoor-Temerature way above 30°C. The Outdoor-Lady is still enjoying the bavarian sun. Still a ittle bit smalish flowers but looking good. Masses of leafs, super bushy. Completely another Phenoltype.
Likes
4
Share
@leo2023
Follow
Very nice plant to grow. Beautiful flowers covered with trichomes. The smell is very lemon citrus flavourt. She gave a bit of a stretch. I think she isn’t the biggest yielder but definitely quality over quantity. Later on the results. Very pleased sofar! I underestimate the density of the buds. Dry weight 375 gram of 5 plants. Pheno number 2 yielded almost 100 gram! Powerfull lemon flavour with a touch of sour. Running pheno number 2 again!
Likes
62
Share
@Tuki3
Follow
Buenas Gente, como vienen? Espero que bien. Bueno creo que la semana que viene arranca a engordar, ya está tirando un rico olor a chicle de naranja, realmente muy rico olor, varios tricomas en las hojas y no mucho más para acotar!
Processing
Likes
23
Share
Another week down few more to go can't wait!! First ever attempt of growing my own so really impatient to see the final results now and get to the finish line, that said all has went well upto now other than the size they reached haha, really started putting on weight now it seems and they smell lovely, excited to see the buds fatten and progress over these last few weeks up until harvest now, started 5 liberty haze also they are just coming upto 3 weeks now so check that diary out to, any comments info tips for the final stages appreciated
Likes
10
Share
@Prop207
Follow
Getting really fucking close.... Hand is to shaky to get some nice close ins to check for milky
Likes
Comments
Share
The struggle is real for her but she is pressing on. Not much growth this week but I look forward with a positive mind.
Likes
7
Share
Great smoke, very smooth, no coughing! I smoke mostly joints, some blunts and occasionally a bong. I find the high very sativa like, it's mentally calming, I'm more focused and energetic. No problems sleeping after several joints either.
Likes
4
Share
Woche 7 Blüte Woche 3 Die Money Maker lässt sich mit der Umstellung viel zeit. Die Wurzeln entwickeln sich auch weiterhin gut auch wenn sie nicht Weiß sind und im Eimer das Wasser auch mal knapp wird, Sie trinkt sehr viel. In dieser Woche habe ich an der Money Maker wenig gemacht außer das ich die Dünger Komponenten auf die nächste Phase der Blüte geändert habe. Voodoo, Tarantula, Piranha und Bud Ignitor habe ich abgesetzt und B-52 und Tasty Terpenes zum Dünge Schema aufgenommen. Bei Fragen einfach die Frage stellen, genauso bei Verbesserungen und Tipps für mich. Danke und viel spaß mit euren Pflanzen.
Processing
Likes
16
Share
Went half/half on feeding on day 119 ppms are still a bit high & a bit acid ph out of range but otherwise things are smelling good.
Likes
20
Share
She's doing very well. Gave her a little clean up today - removed some undergrowth that won't make to the top. Keeping her diet pretty much the same other than an increase in Cal-Mag this week - the other plant in my tent was showing signs of deficiency so I thought they'd both get a little boost since I've been treading lightly. She did a bit of stretching this week - grew about 5" taller! Looking forward to see some fattening of the buds! 👊 ----------- Day 65: PPM 668; PH 5.8. I think her drink is bit on strong side with PPMs increasing a bit since the rez change. Topped her off today with 3/4 gallon of filtered water to dilute things a bit. Sitting at 574 PPM; PH 6.2. Buds are starting to stack nicely and fatten. Day 66: PPM 553; PH 6.2. Let her be. Seems to be happier now that I've watered down her drink a little. Frost is starting to form around some of the buds and she's getting more fragrant. Day 67: PPM 584; PH 5.2. Gave her 3/4 gallon filtered water with light dose of nutes. She's now running at 553 PPM; PH 6.0. Day 68: PPM 563; PH 6.0. Let her be. Day 69: PPM 532; PH 5.8. Gave her 3/4 gallon filtered water/feed. Now at PPM 542; PH 6.2. Day 70: PPM 532; PH 5.1. Discovered my PH meter is toast and has been reading much higher than it should. Got a new meter and hopefully back on track. Thank goodness this plant is resilient. Gave her some PH up and sitting at 6.1.
Likes
8
Share
Hello growers day 14 with the blue monster ok I’m have troubles the poxy stinking police have been raiding people on my estate great (it’s illegal we’re I live)now my wife has told me it’s got to go so what do you do I packed them all up And put em in the in-laws garden 😂 there not doing to bad the weather has been banging lately there just getting a bit of a bashing from the wind so I’m going to finish the blue monster outside now hopefully she does well until next be safe and happy growing ✌️
Likes
2
Share
This plant is growing well, I transplanted them this week into 3 gallon pots from 1 gallon pots. Structure on this plant is pretty nice and visually pleasing to the eye lol.
Likes
30
Share
Hello Diary. Sherbet Queen has entered the first week of flowering. It has grown over 70 cm and is very branched and full of leaves. So on the 28th day I cleaned it up a bit. I removed the leaves and branches at the bottom of the stem, now the air flow through the plant itself will be much better. The plant is very nicely shaped with a solid stalk, the flowers began to form at the ends of the branches. Watering has become more frequent, every two days I water with about 2 liters of water. This week I added only one Easy Bloom Booster tablet to stimulate flowering and I adjusted the p.H to a value around 6.3 and at one watering I added CalMg preventively. The conditions on the Farm are in line with the summer months. The temperature is slightly higher, 28 degrees and the humidity is around 50%. It is expected that the temperature will increase in the coming time, considering the temperatures during the summer. I also changed the light mode, I put 4 hours of darkness and 20 hours of light. For now, Sherbet Queen looks beautiful, happy and proud. Here’s what it looked like last week. 08/06/2021 - Day 24. Watering. I put one Easy Bloom Booster tablet in 6 liters of water and lowered the pH to 6.5. With that, I evenly watered all three plants that are on the “Farm”. Since the last watering was three days ago, the branches and leaves were very droopy which is an indication that they were very very thirsty. Temp / Humidity on the farm - 27.5 degrees and 45% humidity. 10/06/2021 - Day 26. Watering. I prepared 7 lit, lowered the p.H to 6.2 and did not add any other nutrients. 12/06/2021 - Day 28. End of the fourth week. I did defoliation on all three plants on the “Farm,” so did Sherbet Queen. I think a new look will suit her. I photographed the plants, measured the height and then watered them. This time I added 1.5ml / lit of CalMg preventively. That’s it for this week, see you soon.
Likes
10
Share
Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.