Recommended
Likes
Comments
Share
@habibi
Follow
Wächst und gedeiht. Es sind glücklicherweise keine weißen Flecken mehr dazu gekommen. Hab die Lady jetzt direkt in den Boden gepflanzt damit die Wurzeln ordentlich Platz haben.
Likes
32
Share
@Weediz
Follow
Day 58: Everything seems to go smooth. I got my new lamp up, and are experimenting with dimmer, hang height, and space between the bars. This is new for me, my old lamps is garbage compared to this! But as I have 2 pre-/flowering girls, and 4 babies I decided to go with little space between the first 4 bars (for the adults) and the last 2 have some more space between (for the babies), and are not going all the way to the edge. The adults is higher, than comes the teens, and finally the babies so they don't get the same light intensity. I am currently running it pretty low, about 35% and will see the next couple of days how the girls will react Day 61: The girls are starting to hang a bit. I do not know what is causing it, or is it just normal? I took the pictures and video about 3 hours after the light turns off, so it might just be that they are sleeping? Other causes could be too little light, as I just switched to my new light, and are running it for the first time. Maybe I do not water them enough? The humidity has also increased, and is around 50-65%, maybe that is the reason? I also started using RO water, so could be something with the nutrients? Do any of you fellow growers have any idea? UPDATE: Big thank you to @Maltaherbman for your answer. I have raised the lamp a bit. I read 900+ ppdf on my phone before, and now I am getting maximum 800. This is properly not a correct reading, but at least I have it to compare with. I waited to see what happened after the light turned on. Ill took 2 new pictures, and the left lady is all ready recovered, the right one almost, so they might just have been sleeping, but ill keep the light as it is for now. Also a big thank you to you @GrowingGrannie - I keep the coco wet at all time. I have been flushing them a couple of times before, so maybe the watering volume this week is a little lower than usual. Also the watering volume is kind of an estimate, but I will take your advise and keep better track of how much I am watering, but I think its about 2-3L every 2-4 days
Likes
29
Share
@Smokwiri
Follow
Added some extra nutes today.. 🤦 Development is good ;) Plant is loving the light ;) Zamnesia 10% discount voucher for seeds: GROWITGD
Likes
15
Share
6/24/24 the videos of trichomes is from both purple octane and rs 11 Also based on trichomes. I should've counted the last week of veg as a flower week. So she's closer than we 6/25 we have clear cloudy and purple. Leaning towards her going till the end of this week. 6/28 we have about 70-80% cloudy and 20-25% amber. she's ready to go. she will be chopped tomorrow morning. 6/29 unless stated otherwise. happy growing yall, this plant is a fucking badge of honor with how beautiful she 6/28 I lied and chopped her probably 30 mins after I posted that lmao.
Likes
24
Share
@Canadian
Follow
Day 92 from seed the plant has responded very well to lifting her up to have more exposure to the light the buds start to fatten them right away unfortunately it's too late to get huge buds as I was hoping in the beginning but nevertheless for sure it will give me a very good quality flower despise the lack of light in the most important weeks for Bud development and unfortunately that time cannot be claimed back despise that she looks beautiful and I'm sure she will be delightful to smoke . Thank you for reading I will continue to update have a happy grow.
Likes
119
Share
Day 9 and she looks as you guys can see lol i mean to my eyes she just looks amazing, she is fully recovered and full on going like there is no tomorrow , she is praying for 11h strait non stop and i could not be more happy with the way things are running. For this week i will keep the same food regime as last week, man i love how my girls love Aptus Holland and how well they respond to it all 💚💚💚🙏🙏🙏✊✊✊ I know she has a lot of leafs , but its only that hehehe since i clean the branches all up to the top before flipping her to flower leaving just the leafs to help them get more energy for this first 2 weeks of the flowering stage, after it i will defoliate the hell out of this lady best and let her focus her energies on but production, but for now i want her to stretch the most she can since she is not phenotype that stretches a lot 😅 non or lees she is an amazing bud machine i believe she will do it once again hehehe As for the Light intensity i took 12 readings over my canopy to find out my PAR and the average PPFD is 1013 Umol/m2/s, for those of you that do not know the meaning of this, it means photosynthetic photon flux density , this basically the number of photons going arround for plants to absorve in a determinate area, in this case my 3x3 room Day 11 and there were toooo many leafs for what my eyes are use too so i decided to defoliate her, this will also help stopping the stretch since she is doing it more than her mother did and space is not something i have in this 3x3 area lol she is drinking like crazy, 5,5 liters day and increasing, curious to see how much will she be drinking wen in full flower. And she didn’t care at all the fact that i defoliate the hell out of her and she just keep on going and praying like there is no tomorrow , amazing, but amazing phenotype from an amazing genetic, caps off to ZamneziaSeeds for this one, i was impressed with the first round and even more impressed day bay day with the clone I selected 💚💚💚🙏🙏🙏🙌🙌🙌✊✊✊ As always thank you guys for your love , your time, your support and it all, i fell blessed and i am truly thankful 💚💚💚🙏🙏🙏🙌🙌🙌 All i grow is medicine for myself, for me and for my best friend with is me 😆 nothing to sell, so don’t even ask 😅💚💚💚 All info and full product details can be find in can find @ https://viparspectra.eu/collections/grow-lights DISCOUNT CODE 5% - DOGDOCTOR ( all store ) https://www.zamnesia.com DISCOUNT CODE 10% - GROWITGD ( just for seeds ) https://aptus-holland.com/ #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #viparspectra #zamnesiaseeds #growerslove With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚💚💚 More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg 💚💚💚Growers love to you all 💚💚💚
Likes
4
Share
More lime on this one than gas so far, but still early to tell final smells, I had this plant going with my first Apricot Smash and my second Tropicana Cookies Auto. Harvested both plants. This plant will finish in here almost alone. I should be popping 3 Wedding Glue Autos from Seed Stockers by the end of the week, still in the mail.
Processing
Likes
14
Share
Week 1 of flower, pics and video taken on day 6. Lollipopped everything beneath the scrog 3 days ago. All 4 plants are looking healthy and happy.
Likes
10
Share
Debido al descontrol de estos días olvidamos subir la semana 4 y 5 - ya estamos en el día 63 de vida y semana 6 de floracion 😅
Likes
4
Share
@Ledros
Follow
Day 22 (2020-05-31): Did some additional LST and defoliation. For LST I used wire hooks pushed into the soil to encourage sideways growth of the new branches. The G14 looks a lot bushier but it did not have as many large leaves that needs to be removed. Also, due to it's mutant nature, it started with two main branches. Maybe I should have pinched one back, but it seems very healthy so far. Roots are poking out the bottom of both pots. Not sure if this is bad or not. It did not happen in my previous grow but was using 3 gal instead of 2 gal fabric pots. Day 23 (2020-06-01): Investigated the mesh cup filter I am using with the Blumats. Turns out I had it backwards and it had some slimy feeling film inside. Not sure if that is contributing to the PH rise when water sits in the tubing, but I cleaned it out and swapped it the right way. Made some small LST adjustments. Day 24 (2020-06-02): Removed a couple of blocking leaves, made some slight LST tweaks to even things out. One of the Blumats seemed like it was not dripping but bleeding the line caused it to kick in. Must have still had some residual air in the system from yesterday's filter adjustment. PH is still a bit higher coming out of the line, but is much improved. Will continue to monitor. If it stays high may try removing the filter altogether to eliminate that possibility. Day 25 (2020-06-03): Changed the reservoir out. PH was high, but still in range but the water was cloudy and had a pretty rotten smell. Going to check PH and smell daily and see if I can get a handle on what is happening. Maybe I just need to have a regular changing schedule. Day 26 (2020-06-04): PH of reservoir at 5.6. Day 27 (2020-06-05): PH of reservoir at 5.7. DId some LST adjustments and removed a few larger leaves. Noticed some light discoloration spots on a couple of the older leaves. Moved lights a bit closer (21") Day 28 (2020-06-06): Noticed some yellowing on the tips of some of the new growth. I checked the lights and they had been way closer than I thought. Moved to correct distance to see if it may have been early signs of light burn. PH of reservoir is at 6.2. Most likely will change out tomorrow. I also noticed today a bit of white fuzz mold growing on the outside of the pots and even a little bit on the surface of the coco. I am going to turn off the humidifier for a few days and get some 3% H2O2 to wipe down the outside of the pots.
Processing
Likes
8
Share
Likes
9
Share
Sorry no picture for the moment I've crossed the plant with the Sunset Sherbert Bx2 to get seeds of a breed I ve create 😁 Soow I made Dry ice Hash with the material pictures are coming 🤘🏼😘 I've made 4 x 3grammers Temple balls of 160microns with 128g's of nuggs so almost 10% of return of fire golden hash 😍
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Processing
Likes
14
Share
The week started with 2 hours of music for every day, and I plan to continue with this. Relax for me and the plants. Did anybody tried this before? The plants finally stopped from growing. The buds are getting bigger and bigger.
Likes
31
Share
@MrJones
Follow
MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 55%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Super Cropped - and put 2 plants into a training hoop. 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Week 8 and the buds are starting to get larger, thining I may have to clean up a few more fan leaves. great combination of Lights, Nutrients, Environment, and Strain. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 04.12.21 / Fed about 30 ounces today - looking great! ▶️Tuesday 04.13.21 / Fed about 30 ounces today - looking great! ▶️Wednesday 04.14.21/ laying off the feeding tonight, had to readjust one of the plants this afternoon, added some support to it. ▶️Thursday 04.15.21 / These ladies are doing well, the height is right up to the lights, but still looking pretty good. Drop the feed down to 20 ounces per day. ▶️Friday 04.16.21 / Fed about 20 ounces today - looking great! ▶️Saturday 04.17.21 / Fed about 20 ounces today - looking great! ▶️Sunday 04.18.21 / Fed about 20 ounces today - looking great! 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 VIPARSPECTRA XS1000 LED 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj
Likes
17
Share
Hello Diary. The second week of flowering is behind us and the plants are progressing nicely. Purple Punch has reached 66 cm, which means it hasn’t grown anything since last week, all the plants are now about the same height which is great considering the light setting. It is nicely branched and wide, it is full of leaves so I will need to do a little cleaning soon. The flowers develop beautifully and take on a round shape. All in all, there is already a real jungle on the "Farm", two Purple Punch, there is also one Watermelon Auto, so each of them is fighting for as much light as possible. The humidity in the Box is still lower than I would like, the temperature is good. Let's see what the week looked like: 24/02/2021 - Day 29. Watering. I regulated, that is, lowered the p.H. at 6.4 and put 1 Easy Bloom Tablet, on 7 liters of water. Temp / Humidity on the farm - 24.8 degrees and 42% humidity. 27/02/2021 - Day 32. Watering. I adjusted the p.H to 6.4 and added BioBizz as scheduled for the second week of flowering. Temp / Humidity on the farm - 24.9 degrees and 35% humidity. 02/03/2021 - Day 35. Watering and height measurement. This time I did not add any nutrients but only regulated p.H at 6.3. Temp / Humidity on the farm - 25.2 degrees and 39% humidity. Purple Punch Auto # 1 - 66 cm. Purple Punch Auto # 2 - 62 cm. That’s it for this week, thanks to everyone who follows the diary, the support and advice I get means a lot to me. See you soon.
Likes
8
Share
Likes
31
Share
So this is how things are looking after their 1st proper week of Flower, bud sites starting to develop really well..... But not much to say at this stage. More info on the video I have uploaded. Happy Growing guys