Likes
Comments
Share
@BlaKX
Follow
Gorilla Punch Auto 🦍 🥊: 22.6 - 30.6 = 34,5 cm Mimosa Cake Auto 🍹🍰: 22.6 - 30.6 = 52,5 cm Nothern Light Auto 🌌🌠: 22.6 - 30.6 = 63cm Sie sind förmlich explodiert was das Bud Wachstum und Harz Produktion angeht!!! Ich habe leider die Mimosa Cake und NL tauchen müssen weil das Substrat zu trocken war und ich grade in der wichtigsten Phase ein anständiges feuchtes Substrat habe ohne Salz ansammelung am Topf Boden. Die Hitze macht an sich keine Probleme mehr dafür aber mittlerweile die Luftfeuchtigkeit und zwar von draußen wenn das Licht für 6std. Ausgeht mittags um 12uhr-18uhr herrscht oft eine Luftfeuchtigkeit von 50-60% aber ansonsten so 45%-50% RLF. Hab nur PK13/14 zusätzlich verwendet und den booster 1ml erhöht. Ansonsten bin ich wirklich zufrieden und stolz auf meine 3 Autoflower:)💚💜🍀🏻
Likes
28
Share
Week 6 flower, half way there! Buds are starting to fill in now and getting some decent frost. A couple of tops are getting more light than others, and fattening a bit more and looking real nice. It looks like there is some purple starting to come out at the tops. Also spotted some discolouration on a few leaves closest to the light, so I turned the one light down to 60-75%, no need to push it at this point and burn her up! She will go as fast as the soil and environmental conditions will allow her to. Hand watered in Gaia Green Soluble Seaweed Extract 0-0-17, otherwise water drip is running on same schedule. Just using straight tap water that sits in a 30 gallon reservoir with a submergible water pump running 24/7 breaking surface and aerating water. Water comes out the tap @ 7ph and less than 15ppm. So I don’t do nothing to it, I drink it:) Thanks for the view 🤜 Have a great week!
Likes
1
Share
Girls doing well, clearly see all hit with hit substrate 😂 but ChemDawg is despite the hit battling n fast 😂
Likes
22
Share
@Trip614
Follow
So I'm flushing this week, Sunday I used Flawless Finish and watered heavy early, and did a 2nd plain ro flush 6 hours later, I did the same thing Monday. Tuesday I did not give any water at all, Wednesday I flushed the same way with Flawless finish, but water 2 times after that night, I let everything dry Thursday and Friday, It is Saturday, Today I have used only RO water, I am done adding anything. I think I could call it good, but I am going to keep things going after today, tomorrow/Sunday, and Monday, I will not water again, Tuesday the light will not even come on and I will give it a couple days of dark to finish. I could use some tips on how to get some better pics. I try, I really do, but I'm not getting the pics my eyes are seeing, so in the center of the area is all yellow and marooning leaves, and the buds have a pink tint in that area. The trics are getting there, but not yet, I figure by end of week they should be right... almost all cloudy now, a few clear left, but barely any, the few amber here and there, but I'm also not taking a piece to check from the top either, I gettin a look at a few small little buds, near the top, but not the top, I feel like I'm close... , So anxious had to phone a friend to tell me why to wait today... lol, I'll test my runoff ppm's tonight just to be sure, but the way the coco is taking the water makes me think its clean. I'm always ready at the end, Garden of Green seeds have ALWAYS made me look like a great grower. I'm excited, The smells, is very strong, it has a sweeter smell, next week I should have harvesting pics... Thanks for checkin it out
Likes
13
Share
Day 65 of flower, not sure when to cut her down yet, but she's looking well!
Likes
15
Share
Another one down one more to go this fast buds journey has been absolutely an amazing one. The genetics are fire and fun to grow I like to have a lot of variety and fast buds as everything you could want so happy to be a part of this thank you Molly and Heather for making this happen for me and giving me a chance to grow some of the most fire genetics in the world🌿💨💯
Likes
10
Share
This lady was looking absolutely stunning but I had to reduce her height, too tall to be in the balcony guys, let's see how this lady keeps developing
Likes
12
Share
This girl smells great. Cant wait for her to dry and cure
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
32
Share
Bud sites finally showing progression, lovely smell and continues to look extremely healthy only one that was not transplanted from 3 to 5 gallon. Next week will already be their next top dress.
Likes
16
Share
Week 6 flower, half way there! Buds are starting to fill in now and getting some decent frost. A couple of tops are getting more light than others, and fattening a bit more and looking real nice. It looks like there is some purple starting to come out at the tops. She is strong and will go as fast as the soil and environmental conditions will allow her to. Hand watered in Gaia Green Soluble Seaweed Extract 0-0-17, otherwise water drip is running on same schedule. Just using straight tap water that sits in a 30 gallon reservoir with a submergible water pump running 24/7 breaking surface and aerating water. Water comes out the tap @ 7ph and less than 15ppm. So I don’t do nothing to it, I drink it:) Thanks for the view 🤜 Have a great week!
Likes
21
Share
Reaching for the sky. This is the strain I created & this is my first time growing it. It's a regular photoperiod strain I hope it's a girl so I can hopefully taste what my hard work created!
Likes
3
Share
Likes
2
Share
Hey So I had to harvest a little earlier now because I'm going on vacation, so I'm done with everything 2 weeks before :) It was quite easy to grow it has a very strong smell and generally a strong effect it tastes sweet/sour/woody It is sticky and the buds are quite heavy I harvested 146.5g dry weight from a plant :))
Likes
19
Share
This was an amazing firat grow and I’m not done yet love mainlining. Depending on how these dry and the yields come out I may just do lst and get about the same amount of yield out of the grow but I still have another week or so till I chop the others
Likes
9
Share
@MMVSS
Follow
A GREAT WEEK! Transplant From Living Soil Into Hydro Was A Success! Can't Wait To See This Baby Progress...From My Stickiest Most Intoxicating Strain Last Round And She Gave Me A Baby! This Is Her Seedling....