Likes
Comments
Share
Another week of sunny weather. The training went well considering the outdoors. At the end of the week the stamens showed.
Likes
67
Share
@mcflow
Follow
I did a little bit of defoliation
Likes
23
Share
Only water and no water for the last 5-6 days. Also no light in the last 24 hours.
Likes
12
Share
Fastbuds - Mimosa (2x) 08/27 Coming into week 4 Veg, User error stunted them lightly but things seem back on track. Exhale 365 C02 bag introduced last week to setup for early flower. No signs of concern or any deficiencies. Early flowering has begun *Mid-Week Update* *08/30* Both plants have recovered nicely, and placed under trellis net. Introduced NPK Phosphate Purged Pure Blend Pro Grow *End of week recap* Flowering has begun Stopped veg nute feed Introduced Raw NPK Phosphorus and Potassium
Likes
11
Share
Processing
Likes
1
Share
Started adding the nutes at 1ml/l. Just using Advanced Nutrients Sensi Coco A+B for veg, Will add in some molasses after any HST or defoliation (stress). Looking good so far. Germinated 2 of these plants but only one will flower this time round. The other will become a mother for a full 4x4 tent GDP grow after this one finishes.
Likes
36
Share
@SAC87
Follow
Hi Growers. These little plants have been cruising along just fine. The whole week they have just been sprayed with ph RO water with a touch of cal pow. Yesterday I noticed they were a bit lighter in color and using peat based medium with zero nutrients I decided to feed according to the FastBuds suggested 1/8 strength. It still ended up being around 225 ppm. I also raised the light 3” as I noticed the serrated leaf edge starting to point straight up. That SF4000 is a beast against tiny plants even at 30%. I’ve got the environment at approx 77 & 60% with a oscillating fan and humidifier running. I finally was able to remove that shell helmet off the middle plant. Once I did she immediately took off. I just sprayed and saturated the membrane and ultra gently manipulated it til one cotyledon popped out and left it alone. The hull fell off the other side by itself. All in all they’re looking happy and are doing what they should be. 🤞👍🏻🌱 Happy Growing 🌱
Likes
31
Share
Love the nugs coming In. 12/9/23 - Update, the Royal Dwarf auto is very tint. She's only 1 foot tall and already has 25 bud sites! I'm very happy with the flowers coming in, no 🍌 nanners or hermie characteristics! She's 100% female, and fits her name "Itty-Bitty"
Likes
3
Share
@Pechu420
Follow
They were already quite wilted, and I decided to harvest them a day early because I was sad to see them like that. Now I'll let them dry and then taste them. I couldn't weigh them when they were wet, so I'll wait until I see the dry weight. After 9 days of drying, I put it to cure today. I've already tried it, it's delicious, little bitter buts its ok only 9 days. The biggest one has a bitter taste, it was overfertilized, let's see if the cure will improve it. The smallest one was also overfertilized, but smaller, it's very tasty, it looks like the first highcloudz i planted. The taste didn't improve much because of the overfert, I did a water cure, it improved a bit, but I think the overfert was too poisonous for the plants. Wait a while to see if there is any improvement. The overfertilization was more serious than I imagined, one plant had foxtails and became a hermaphrodite, few bananas, and only one good seed was produced. In the future I will definitely plant this strain again, but I hope not to make the same terrible mistake of overfertilization. They yielded very well despite the overfert, but I expected more if there was no overfert, of course. Almost 1g/watt, that's good.
Likes
19
Share
What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !
Likes
39
Share
First day in the Wilma system and placed them under the net. Just installed the Mars FC4800 and the light is eye burning bright.
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 56 Took some glamor pics with black background - not really for vanity (although there's a little) but for contrast. I see more of the lockout issue better in the pics this way. - on that note, the ph seems to be working as it's been two days since defoliation and knitting needle ph correction, and the progression is way slower than it was on the last leaves at 3rd day of identifying. So with that, room VPD of 1.07kpa seems stable enough with temps about 76F/65%RH/33%ILV I released the binds today to let her grow without them until they crowd each other too much and I need to restrain - so in a couple of days at max. Day 62 Transfer day. Although at first I didnt think I would be able to until Saturday, I got pots and plant saucers today, so I ended up going ahead and doing it. Started by calibrating/testing both meters. Double checked the soil mix from yesterday as the last time I used wood ash the ph rose the day after... however this time it was fully mixed to I wanted to know if there would be a higher ph - it was the same as yesterady - 5 reading avg of about 6.35 - the slurry of 1:1 soil and 7.7 ph water was tested at 6.3 also. Made about .75 gallon of 75/25 veg/bloom juice water at 500ppm feed water. Tried to ph read the soil in the pot and seen it go from 6.6 down to 6.35 (took video) in the dry soil, so I decided to use the 6.35 new soil reading and ph balanced the feed to that. Used the needles since it was 7 days since the last feed and I am using such a small amount. Poured over needles in 8 places and pulled each out to let water down. the vacuum pulls the water down when I lift the needles. Then I mixed 5tsp of Dynomyco to the 5 gallons of new soil and mixed really good. I placed a layer of perlite on the bottom of the 10 gallon pot and then layered in some soil. Then with the help of my wife we pulled the plant out of the pot and placed it in the 10 gallon. I place back in the tent and added about a quart of plain de-chlorinated water evenly over the new and older soil to help bind them. I reduced lights by 100ppfd to have about 505 and 500 at center colas and 430 lowest on outer ring with most at 450 and 470 highest. Soil to light is 35 inches and the plant is about 14 inches so about 21 inches from leaves to lights. I left the ring off today and will rebind as needed tomorrow after she rests. Today the leaves look wilted and limp. Also reduced humidity to 60% so 58 to 65% should be the range and the temps are 73F with the lights lower. PPFD was higher with the new growth - unbound and tucked in for better cola/light position, it reads 570 to 580 on outer colas and 590 at both center branches Day 57 Getting 1 more day out of free range growth before I tie her back against a ring. So in that time I decided to take a few vanity pics. Overall the ph block seems to have slowed or stopped and she's back to growing again. Will be thinking about flip at the end of this week or so. VPD same stats 76F/65%RH/33%ILV - ppfd right at max so I'll likely tie her off tomorrow. 605 600 in center and 580 to 590 at the outer ring. Day 58 VPD stats mostly steady again today - 76F/65%RH/33%ILV - ppfd was checked after LST, measured 600 at each center cola and the outer ring measured between 550 and 590 most at 580 So as I said, I did LST today to bind her more out while the 4 center 4 colas fill the middle. I had to bind to the pot base instead of the ring as the colas are still a little short to reach for binds at the ring just yet. There's a lot of space to fill and a few (about half) of the out colas are sideways for now. Had a break at the center cola when I tried to pull it back for bind. I knew to hold the branch at the node but forgot to do it here and heard a "snap" ... taped the crack and moved on - will monitor obviously Day 59 Did more light LST to ensure the branches are growing where I want. PPFD was mostly the same as yesterday only now there are more colas around 560 than 580 on the outer ring with the center colas at 610 and 590 (front cola was tied down to spread more away from the ring and fill center better. vpd same as past week or so 76F/65%RH/33%ILV Last feed was on day 54 and the soil still seems damp so I will check again tomorrow for the next day. (Day 61) The broken branch doesnt seem to have affected either side of the split as both sides seem to have grown a little with little to no wilt or drooping leaves. Im hoping it heals okay and doesnt delay flip to recover more; still monitoring. Day 60 Did some light LST today by releasing the lower binds to the pot and attached as couple to the outer ring now. So far I only have to bind a few as most are already holding where i want them to. Took the tape off the split and seen I didnt seel the gap closed when I taped it so now Im considering a drop of super glue to bind the branch back in hopes it grows onto the other side again. If not at least it would be more secure than it is now. And since it's a main split for 4 colas, I dont want too restrict it by binding at the split and potentially cutting off the nutrient pathways. ppfd after LST was 610 and 600 after more LST and the outer ring is still ranging 550 to 580 with more at 560 now. VPD same as I havent messing with any of the variables. 76F/65%RH/33%ILV Soil is a bit dry and it's been 5 days since the last feed flush, so I have about 3 gallons of tap burning of chlorine now for a feed tomorrow morning. Might still update again later if I find superglue... found some superglue - tried to take pictures but I cant hold, squeeze the applicator, and film with just two hands. So the idea gets through, I did both sides. On a side note I discovered a root popping out of the soil from the top. Covered it up but wasn't sure if I should be concerned. Day 61 VPD same as it's been for most of the last week - 74F/65%RH/33%ILV PPFD was recorded after I turn the plant a quarter turn for the smaller colas struggling to get over he ring's edge to have more light. Most colas at 580 with a couple at 600 and a couple more at 550 - center colas are hitting 615 and 620, but I have plancs to reduce in the next couple of days now On that note, the root growing out of the top tells me that she's hungry and needs more root space, even if that means growing through the top of the soil. So I plan to transplant to a 10 gallon and flip after the recovery. After reviewing more of NugBucket's journal I realized this is why he moves them when growing 16 colas. New pots should be here Friday so I should be able do it on Saturday. So I prepped soil (using more Happy frog with mycorrhizal fungi already growing in it for a few weeks) with de-chlorinated tap water Started by ph testing the soil and the water (4 readings on soil at 5.03 avg) - added about 1/2 cup total of wood ash to bring up the ph , mixed and tested again - added water at (about 7.7 ph) and tested again... last 5 readings in soil was 6.24,6.3,6.35,6.37,6.38 avg of 6.328 - covered and let rest until needed. Since I plan to transplant in a few days I felt it would be best to 'lightly' feed tomorrow, again on transplant day, and again 2 to 3 days later. Since my wife was taking pics at this time, I could only find this one to show the roots growing into the perlite then we planted it in the bigger pot. -------- (Day 62 root base picture from above) I have a hypothesis that says these are so short because I intentionally tried not to move the plant without the base stand to keep it from grinding these up and allowed them to grow in the last 2 weeks. This is that test picture/results. I like the idea of better/more drainage, but thinking I am doing more harm each time I hear those gravel pieces crunch as it cuts those and forces the plant to look somewhere else for root space. Notice how the small root lines have no finer pieces or laterals grow out from these - I believe that is because they are so new in growth and that the perlite chewed up the smaller laterals even with little to no movement over the last two weeks I would like to see a root ball experiment that exposed the roots throughout the grow but for now I can see these roots do grow into the base perlite and need to be handled carefully if you want them to grow more freely or with a standard pot size. As you can see Im not root bound but my plant thinks it is and is growing roots out the top.
Likes
4
Share
Impressed with this plant. Only grew it under a cheap LED and it did really well. Harvested ~92G of prime bud plus an ounce of frosty trim which will be made into bubble hash. Will be interesting to see how much more it would yield under better lights. Nugs are dense, frosty and the hit from this strain is hard. Night time smoke. Will grow again. EDIT: As it cured, this just got better and better. Best weed I have grown, even better than the Wedding Gelato, which was incredible. Popped another seed straight away. Update after 12 days curing (See video): Gorilla gonna knock you out, son! Wow! This aint no friendly Disney Gorilla. This is a Dominant male Silverback with zero respect! These buds are dense and sticky after 12 days with a 62% humidipack in a Mason burping daily for the first week. Will def grow this again. Hardest hitting and as smooth as anything I've ever grown, too. Damn!
Likes
Comments
Share
Now we're Back on Track. I've started to her to the Side, to form her. The Permanent Marker is a Hybrid which IS very clear Here. Long branches without enough flowerstems. I tie the main's for a good 90 degree to go in the Kind of sog direction. And, what i learned from Carl Kushman: Break the inside carefully of your stems. It will make the plant stronger. Believe me. Just feel small balls inside the stems and crush every other. With that technic you can Control the growing
Processing
Likes
2
Share
@Ab_87
Follow
1-Starting the week strong, plant is looking good. Not sure if the buds should be bigger or not but according to the strain it’s a 70-80 days flowering time so I still have plenty of time to see those buds fattening up. 2-Added 75W full spectrum LED to increase quality of pictures. In my opinion, totally worth it. Got to see my plant from a different light was amazing. Everything is looking good and the soil is still slightly moist. Probably water tomorrow. Separated all the branches to allow more light to penetrate the middle of the plant. 3-Soil completely dry, water plant with flowering nutrients. The smell seems to be a little stronger today. 4,5,6-No major changes.