First week from clone. Started at day 5. Good week. Worked on the discoloration and growth this week

Jeg har nu min nr 2outdoor ( den anden har stået ude i over 12dage :-) og er til gengæld forret med jord og 🍁! Jeg er virkelig overrasket 😮 over at det har kunnet lade sig gøre at spirer direkte i underlaget. Men jeg har også lagt tørret blade 🍁 på toppen om natten 💚☮️HELD OG LYKKE TIL ALLE SAMMEN DER UDE

it is healthy and the buds grow vigorously. so far it has withstood wind and weather. it grows in a 1 litre pot. it is more of a minigrow. but it performs very well for the conditions.

there is a lot of Thc on the plant already

Letting them finish out. Just don’t miss a watering

Im new this is my 3rd grow.

Big fat colas almost there. You can see the structure, but they’ve just started to fatten up. Those colas are getting heavy. I think I’ll have to help them with a bamboo stick or something else. The smell is very strong, especially if you touch the stems or the sugar leaves. Next week I’ll stop with Big Bud and start with Overdrive 👊

After this wild bushy stretch I had to do Late HST to keep them tops from burning

This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless

Start of week 2, day 8 of flowering. The plants are sagging a bit in these photos, as I took them just before feeding, except for the pics in the grow room, they are just after feeding. So far, they all look good and healthy, a few leaves are showing some small deficiency signs, hopefully that will go away as additional nutrients are added over the grow cycle.

November 16th, 47 days post flip. Plants continue to fatten and have put on some really noticeable weight in the last week. By the looks of things I’m expecting around 10 more days of fattening and than a week or two of ripening before harvest. I will do my final defoliation around mid week this week. Shooting for day 49 or 50. At this point will not be providing anything but water. I still am not seeing any fade so I think she has plenty of what she needs. I did get a chance to add those two smaller fans I wanted to add. This has dropped my temperatures from 82 to 77. This drop should hopefully help preserve terpenes and help prevent mold. The airflow will also help prevent mold. Plant 1(Cherry Chunks): The frost on this one is insane. I also get why they call it cherry chunks, it’s terpenes profile is starting to come through and it is tart in nature; its structure is also very chunk like. Much lighter green compared to the two purple marmalades Plant 2(Purple Marmalade): The resin on this thing has been insane since the very start of flowering. Smells of tropical fruits and guava really looking forward to this one Plant 3(Purple Marmalade): Smells on this one are finally starting to take off, it slept for awhile as far as the smell department went. It is starting to take on a sweet gassy funk kind of smell. Possibly lavender and gas? I’ll have a better idea come next week. The density on these nugs are also insane, look like they are going to explode any second. Purple Marmalade Clones: Growing very well, needs a good defoliation here soon and maybe some craft blend. As always guys thank you so much for following along and God bless!

31/aug Week 4 of flowering is done. She stoped growing and now focus is on bud growth and density. I defloatied her to allow light to come in hand also took off the lower tiny flowers. Food is normal minus 2l of water since I've seen minor burns on some leafs.

My o my, what can I say... These ladies are gorgeous! Along with adding in the 2000W along side my 600W, I cut out the grow solution in my nutes contrary to the instructions and my ladies are booming! We'll see how the rest of the week continues! I started a majority bloom with some added glucose for my feed to help with bud weight but they are really packing on. Hopefully next week will be my last week of feeding as trichrome production increases and I can start my 2 week flush!

En esta actualización se incluyen 2 semanas ya que por trabajo me fue imposible añadir la semana anterior. El día 15 de Agosto recibió la segunda pulverización de Bacillus Thuringiensis para prevenir el ataque de las orugas. Sigo alternando riego de agua un día con riego de Ascophillum Nodosum al día siguiente. He dejado de regar con Cannazym.

Following The Grow Boss tips on YouTube "...yield is based on light, quality is based on growers talent" "...number one problem is, too much light, too much water, too many nutrients" Nutrients : (after having issues with nut burns, I decided to use Grow Boss's perfect ppm calculator) Invasion T (Glomus intraradices BEG72 and TRICHODERMA atrovide MUCL45632) 1g / plant Monster X mycorhizes (500 000 propaguls / Kg , made in vitro) 2g / 20cl then complete to make 1l Humic Fulvic Booster (humic and fulvic acids) 1ml / 1l Cannazym 2.5ml / 1l Rhizoponics 0.4ml/1l Lights: 2 x Adjust-A-Wings Avenger 600w HPS Lumatek 90000 Lumens 1000PAR 600w HPS Philips Son-t Green Power 95000 Lumens Soil:Platinium Royal Mix premium quality What is vapor pressure deficit? Often, marijuana growers who have their plants in indoor grow tents or rooms with artificial lighting, take into account parameters such as temperature and relative humidity to maximize plants growth and bloom, thus obtaining abundant harvest with top quality flowers. As we will see later, these factors affect different processes of the plant, such as transpiration or nutrient uptake. However, we usually forget about another important factor that is related to the aforementioned ones: vapor pressure deficit or VPD. Broadly speaking, VPD is the difference between the amount of water vapor that the atmosphere is able to retain (which depends on temperature) and the amount of water vapor contained in it (relative humidity). It is usually measured in kilopascals (kPa). Providing our plants with a correct relationship between temperature and relative moisture will keep us on the right VPD parameters, increasing the plant’s activity and thus improving its growth and showing its full potential during the flowering phase. The ideal would be to adjust both parameters (temperature and humidity) to get the best possible VPD value, so that the development of plants will be amazing.In the chart above you can see the right temperature and moisture values to maximize the development of cannabis plants. The green zone shows you optimal values of VPD, in which it would be ideal to maintain the environment. The orange zone shows correct values, in which plants should not have problems to develop normally. However, red areas show values in which your plants will be very far from hit their full potential, since the relation between temperature and moisture is not optimal. With relatively high values of VPD (between 5 and 12) plants tend to open their stomata and release a considerable amount of water vapor into the environment (increasing their transpiration). This increase in transpiration results in an increase in the plant’s photosynthetic activity, which will need more nutrients and will improve its overall growth, both during growth and bloom. The best range is between 7.5 and 10.5, which we have marked in green. However, we must be careful that VPD is not too high (dark red zone) since the plant would close its stomata to avoid releasing too much water vapor to the environment, which would result in fast dehydration due to excessive transpiration. On the other hand, if VPD is too low (light red zone), the plant will also close its stomata for not releasing more water into the atmosphere, which in this case would be already saturated (it would have reached the maximum water retention capacity in a specific temperature). In this way, reducing transpiration will also reduce photosynthesis, which has a direct impact on the plant’s development and yield. That way, VPD is essential when it comes to offer the best conditions for the development of plants, also to understand its water requirements according to the nutrients used and thus adjust them correctly to meet the grower’s expectations. N/B: SAY NO TO DRUGS -[Day 90] The plants are getting massive, not a lot of space left in the room, each pictures are token back against the wall or on top of a chair. The Super Skunk shall be ready first , the trichomes are visible without using a microscope, the scent is like an amazing candy floss coated with Skunk pee 😅Boerejongens quality @Home 😊 -[Day 93] Switching Buld Lumatek 90000 Lumens 1000PAR to SuperPlant Super Red 85000 Lumens 2000K 1498nm Lightening under the 1500nm wavelength (2000K) just between the NIR and the Microwave length, can't stand in the room too long without getting tears and shining eyes. Buds shall start to blowup like pineapples, increasing yield. -[Day 98] Everything is getting frosty. Starting to decrease RH . -[Day 103] Today the Y Griega started to push on her terpenes, believe it or not that plant smell stronger than the 6 giants Skunks (the Skunk strain is already a very strong smelling plant), she smell like a coffeeshop front door, the fragrance is absolutely amazing and fantastic, I will definitely grow a full crop of that strain ! -[Day 105] 42 days of Blooming folks ! It's getting serious now 😄 If it can helps you to realize, each plants gots 4 side and a middle, each sides gots 4-6 buds and there's 5-6 buds in the middle, there's 11 plants of 1,60m/5.25ft, how many buds does it makes ?? The correct answer will win 1 like 😅😂😅😂 -[Day 106] WEEK 7 of flowering, the end is close my friends, I'm trying to give you the best shots as possible, I wish I'd could share a good smoke from this crop with you guys ....😉 -[Day 113] WEEK 8 starting, every beginning has an end, this is where the Fall is gonna start. -[Day 115] LADY'S AND GENTLEMEN !!! In the Indica's category the winner is .... ruuuuummmmmbbbbbllllleeee ..... VANILLA KUSH !!!!!! I've seriously tough the Super Skunks will be ready first, but Vanilla Kush has shown milky tric's after 52 days of Blooming, waiting for some few ambers tric's before starting the Flush. -[Day 121] Hopefully for me I didn't trust in breeders flowering periods I would have f*ck up the crop ... Plants are fading slowly and naturally, I won't need to flush. Checking the trichomes every 4 days, the crop will probably need another 2-3 weeks. All plants are running on water now till the end. Buds are ripening, the smell has turn into a kind of roasted coffee beans with Skunk pee and cotton candy. -[Day 122] Milky tric's spotted on Blueberry after 59 days of blooming -[Day 123] 60 Days of blooming, gonna flush them all

DAY 71 F: Well a day overdue for the update but I have been a busy fellow in the real world. The Girls scout cookies have dried enough to be considered for jarring. They have finished so perfectly and so damn tacky too. They smell of sweet candy after a lollipop lick. So nice. I have been taking samples the past week of so and drying them . temptation won.lol Idont expect a huge yield from their size but the quality is bang on the money. The Amnesia haze ladies are so so close now . They are rock somid still and have really packed the trichs on , a little swelling has been noticable but not the second flush of pistils I was hoping for. #1 and 2 are going to be left until day 77 at least , so another week but the #3 lady has got to go into the dark period now I think. She was the girl I confused as a gsc too so had her dragon force very early in that respect. Seeing how faded out she has got during the last week has helped drive the decision to get her out now. She will be in the dark for 48 hours then trimmed for drying. They will all be fed just water now to use up the remaining nutes in the pots to the end. The critical cheese is in mid flush of her newest pistils and thankfully is swelling nicely due to that fact. She has a really fuel/ nail polish heavy aroma at present but I can smell the sweet tang too. She looks like her yield could be a good one for what looked like a gangly specimen for the past 12 weeks. Lol . One of criticals finest qualities I think. All in all a good week for the ladies if not a calm one. Let's see what next week brings. Be safe and well growmies.

I really love grow ShiskaBerry.It’s a very tasty and strong indica strain. Suitable for beginners, very easy high-yielding strain. One of the best indica strains, one of my favorites😇 Thanks to everyone who follow my grow report, love u all, Peace!😘

AMAZING WEEK! The environment is reading for flowering. Lighting, feeding, watering, air temp and CO2 are all stable and should give my plants a stress free life. Humidity is still high, so I'll need to come up with a plan for dealing with that ASAP. I've introduced CO2 into the grow with my brand new AirBomz unit. It uses a light sensor that releases CO2 when the lights turn on, and then uses a timer to release every 2hrs until the light switch off. I doubt I'll reach the 1200PPM stated by the manufacturer, mainly because I'm running an extraction, but I figure some is better than none. Cool controller also included. After doing some reading I can see there's two things that I need to look out for: A) Switching off the extraction so it doesn't suck away the precious CO2 before the plants have had a chance to absorb it B) Making sure the room doesn't get too hot whilst the extraction is off, causing heat stress My solution is: A) Switch off extraction for 15mins at the AirBomz 2hr interval B) Use the Temp Controller the switch off the circulation fan when temp exceeds 27C C) Controller then switches on the active intake when temp exceeds 28C D) Temp is held at 29C whilst the extraction is off D) Extraction turns back on after 15 mins, temp drops below 27C E) Temp controller switches off active intake... F) ...And switches on the circulation fan G) Repeats every 2hrs NEXT WEEK: Work out how much the girls are drinking! I'll know when I change the reservoir.

Little defoliation