End of week 9! Everything is progressing, buds are stacking good, leaves are still yellowish but the calmag deficiency and the rust spots stopped progressing, I'm starting to think that maybe the yellowing is natural fading? Don't have a clue at this point, I just want this first run to finish in the best way possible. She is starting to smell amazing, I really can't wait to chop her but I think she has at least 3 weeks more. Patience is the key! Day 66 08/05/2022 - Holy fucking shit, I came back home after 2 days that I was out and the smell has taken the whole house LMAO, never felt anything like it, smell of lemon and candy, it makes my mouth wet😱 Day 67 09/05/2022 - Took some pics with lights off and flash and defoliated a bit to improve air flow

26.10 Took clones from all of the plants they i didn’t have backups for. Took out all the small branches and lolipopped a bit. They look fantastic and it’s one of my best starts of flower yet.

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Semana de transición entre el abono para el periodo vegetativo (Bio Vega) y el abono que utilizaremos durante el periodo de floración (Bio Flores). El primero más rico en nitrógeno y el segundo, en fósforo, magnesio y potasio. Mezclo Bio Rhizotonic + Bio Vega + Bio Flores y riego con 50 litros de agua, todo el cultivo... Alterno riegos cada tres días, unos con abono y otros con agua. La próxima semana, elimináremos Bio Vega.

Finalizamos la quinta semana de floración de manera extraordinaria 💯🏆

Bin so hyped!🤩🤩

Days 50 - 56 Last week, I had a major lockout issue with my plants, so I’ve started monitoring both the irrigation and runoff water closely. I had to do three rounds of flushing, but after that, my lady started to recover, which was a relief! Since I'm going on vacation for the next 10 days, I’ve been working on setting up an autonomous irrigation system, which I successfully implemented and built yesterday. It uses three 12V water pumps controller by Arduino Uno via H-Bridge motor drivers, each dedicated to one plant. The system runs from 9 a.m. to 11 p.m., delivering around 250 mL of water per plant per session. This means each plant will get approximately 2.5 liters of water per day. I’ve mixed all the nutrients in advance. I know the ideal scenario would be to add the fertilizers just before each irrigation session, but unfortunately, that’s not possible. Still, it’s better than nothing. The system has been running smoothly since this morning, and so far, the cycle works fine. I’ll improve it further when I get back from vacation. To prevent any future lockout issues, I’ve extended the irrigation cycles throughout the day to ensure the coco stays consistently moist.

Day 64, 19th of November 2020: Defoliation is done. She is beautiful and you know what? I checked other diaries and wanted to see that nice purple colour and hardly seen indoor turned to be purple more outdoor qas like that. I think she is more sensitive for the environment in terms of colour. But! I might see it is coming. I may have spotted smthg.... I am not sure yet but... but.... If yes, I would be so happy to have a little purple bonsai OMG 😲 All good anyways she is good girl, fertilization continues the same way like it was with the mix above and the ratio. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

Venga familia que ya viene la cosecha de estas finta F1 de ZamnesiaSeeds, que ganas que tenia ya de darles machetazo, me estaban dando muchos quebraderos de cabeza. Las flores no son para nada llamativas, una variedad más cruzada con rudelaris, que para mi gusto es perder el tiempo y el dinero invertido en cultivar cosas así… no merece la pena en interior, el ratio de gramo watio se me quedó en 0.5 , de los no peores resultados que tuve en los últimos 5 años. a sido una genética con la que no disfruté nada cultivarla, es complicada, es bastante sensible. Las plantas en sí se quedaron enanas y para nada fue lo que esperaba, me recordaron a las autos que plantaba en el 2012… Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.

week intel: its time to harvest some of plants the ones that is mature enough. indica dominant plants will done first always so we should harvest them first because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. indica dominant plants will get done 1 or 2 weeks sooner than sativa dominant plants that will often takes more than 8 weeks so be aware to harvest them sooner. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

Week 2 of flowering , purple chem is coming along real nice. I did a bit of defoliation for more light penetration. Can’t wait to see what she looks like in the coming weeks. ✌️🏼

Happy new year everyone! I hope everyone had some amazing festivities! 😃 Regarding my babies I think I might be underfeeding them and one might be shocked thanks to the heat and the lack of nutrients I gave them, last week's runoff water scared me and the plants might be suffering because of that! Most of the issues starts to get more noticeable later during the week! 😖 I started giving them few nutrients to see how they would react and at the end of the week it's clear that I had to give them waaaaay more 😵 Besides that I also moved them to their final pots and I topped Pistachio, out of the two she's the one that looks the best. I also defoliated them a little. I also believe they didn't get a transplant shock (I mean, they would've been worse if that was the case haha) and I added more mycorrhizas during the transplant (I heard they help a lot with hot climates and I need help with that badly) Anyway, thanks for reading! Stay tuned for the next update! 😉

Black valium chop Day 101 I'm actually shocked with this one as i thought the foxtailing would make her airy but she seems quite dense considering 😍 smells fairly potent but like a Fruity skunky smell 🤤 got a small bit of finger hash to try later aswell. Didn't get to hang this one as wasn't to bothered as i was thinking of making butter but now i done a wet trim she looks a lot better so now i don't know weather to keep her to smoke 🤣 I don't bother weighing while wet as seems very pointless to me like what i could of had kind of thing 🤣 probably around 4oz I reckon though! I will update in about a week after she's dried in the herbdryer 💯😁✌️🏻💚

Week 8 This week i ´ve been defoliating the cookies and stopped to give them nuts after some signs of stress on leaves, they are curling up and get burn out on their tips, this is most visible on pot 1 who´s appearing to be a sativa pheno! On the other hand Pot 2 who appears to be more indica pheno are showing more resistance to nuts! I Just been feeding them with ph water and have increase the distance for the ligths, I dont relate the burns on my leaves from that but with the temperatures on outside changing so drastic and the entire grow been heated and sealed (in order to save some money on energy) i only opened the windows to refresh the air two or tree times this week for a couple of hours generaly at 12 oclock to dont have my temps changing from 22 degres to 8 degres 😱, not the best conditions and not my easiest grow but what can i say? You can look them an judge... to me they are fucking Hero´s... They became thirsty, suffered from insufficient air flow, suffered slight burns for 24 hours of continuous light from the seed until now and still suffered from excessive fertilization but the ladies didn't fall off their high heels 🙌

gorilla cookies is a resin producer of the very finest calibre. Her buds are covered with trichomes that start to mature after only about 60 days. A few more days and the lady will be harvested. She is so beautiful 🤩

So heute war es die erste lange Nacht dunkel im Zelt. Werde jetzt die zwei bis Sonntag in Ruhe lassen und dann gemütlich das Netz einspannen. Hoffe ich kann die zwei noch gut trainieren unter dem Netz. 19.4 heute das netzt ins Zelt gehangen und mal etwas erlaubt. Würde gern die vorderen Tribe noch etwas höher wachsen lassen, bin aber bis jetzt ganz zufrieden mit dem Grow

Merlin Mintz is doing good. She just got into the solution. Everything is looking really good at the moment. Thank you Spider Farmer, Aeque Genetics, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the likes, follows, comments, and subscriptions on my YouTube channel. I greatly appreciate all the support. 🌱🌱 🌱https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Our Permanent Marker from Zamnesia has responded very well to the application of the techniques, it has started the flowering phase very well and is preparing to prepare our gifts. ** Remember that we are growing a plant worked with the techniques indicated and another left to grow without pruning to preserve its speed; in the previous/next diary you will find the other plant of the same variety. Here we are talking about a very effective Main Lining, a bit difficult at the beginning but now very successful. Generally speaking, it is performed like this: first topping cut at the 2/3rd internode maximum, the plant is allowed to continue for another three internodes and then topping again. The lateral branches can be worked with topping again but I recommend doing it only if the plant is responding well. We are in a 100% organic configuration, the soil is recycled Promix + 1/3 fresh soil + 10% Perlite + RQS Mycorrhizae Mix (4 g in the mix, 1 g under the small fiber pot). We are fertilizing with // 1 ml/l Power Roots - 1 ml/l Pure Zym - 1 ml/l Sugar Royal - 3 ml/l Alga Bloom - 1ml/l Power Buds We sprayed 5 ml/l Vita Race Foliare once a week. For all the info https://plagron.com/ All nutrients are available from Zamnesia: https://www.zamnesia.io/it/531-growshop/476-fertilizers We always have RQS's excellent mycorrhizae running through the soil. https://www.zamnesia.io/5778-mix-micorrhiza-easy-roots.html Try this variety, it is a top strain of recent years very high level of thc ---- // https://www.zamnesia.io/it/12508-zamnesia-seeds-permanent-marker.html Brief description of Zamnesia // Here is a good opportunity to enrich your genetic library with another award-winning variety: Permanent Marker was crowned Strain of the Year 2023 by Leafly, thanks to its intense aromas, high levels of THC and its physical vivacity. Originally created by JBeezy and Seed Junky Genetics, our team managed to secure a cutting of this modern top cultivar, so you can grow it comfortably at home, whether indoors, outdoors or in a greenhouse. Permanent Marker fits perfectly in any environment! The whole world of growing and more is at Zamnesia: just take a look at the site and you will find "all the best that nature has to offer" in various shapes and colors. -- // www.zamnesia.com

Great little strain Growing well nothing to complain about it’s up there with my top growers out of 25 plants it’s up there what’s the top five strongest so happy about that should be a good little plant I went ahead and topped this plant I like to top my plants early or at the third node I get good plant structure and it ends up being a nice bushy plant if u look at my other grows you will see my grow technique I do a lot of topping and a bit of LST and some HST tying down branches and stuff like that till I get that nice round plant look it all start here at the first topping to get the bushy look