Well all is good and moving along.. remember its more like week 9 now. i will start flushing in a few days maybe

Such a beaudy! cant wait to dry her.

Week 2 has gone just as well as I'd like it too! I had an accident during the week where I had dropped a sticky bug trap on one of my girls, this led to me accidentally ripping off a fan leaf and a half, but she seems to have come out of it just fine! (Thankfully). I have been feeding 1/3 strength nutes the past few feeds, stepping it up from 1/4. I will be watering until I see runoff from now on to prevent nutrients from building up in the coco. Update(day 15, 4/12/20) Today I purchased a new oscillating fan, co2 bags and a new hygrometer that hooks up to my phone and shows me stats. The girls have been putting in a lot of work over the past 24 hours. I also had a Purple Punch photo seed sprout today which I may be turning into a mother plant. I will be starting a diary for this girl too. Update (Day 16 5/12/20) Second purple punch photo popped today, going to keep 1 inside and give the other to my mom to take care of. The girls got their first 1/4 dose of calmag today fed at 6ph due to all the nutrients settling there.( I do have ph +/- but I'm going to try run this whole grow at 5.8-6.2. Update (Day 17 6/12/20) Plants seem happy today. Fan leaves producing a the pre-existing nodes are starting to shoot out quite rapidly. Unfortunately, my streets power went out today for ~90 minutes, I opened the tent, windows and doors to get any light in I could, thankfully the power came back on shortly after. I fed the girls today with very little run-off(I'm trying to perfect the amount of water they need). Update (Day 18 7/12/20) The girls have jumped up over night! I wont be feeding today as I'd like the coco to dry out quite a bit more. Update (Day 19 8/12/20 Gave the girls a small feed today with very little run-off Everything seems to be going well so far, I'm very thankful! Update (day 20 9/12/20) Everything is going pretty well today. I will not be feeding as the increased humidity has kept the coco more moist than usual. Will be feeding full strength nutes tomorrow! Thanks for stopping by, HMU with any questions or tips you have.

Esta semana no he regado con fertilizantes, solo agua, esperando que lleguen los dias de corte. Los cogollos se están tornando de un color violeta, en las fotos no se llega a apreciar.

**Encontrarás la traducción a español al final de la descripción** From/Desde: 10/05/19 || To/Hasta: 16/05/19 From day/Desde día: 78 || To day/Hasta día: 84 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- 5 - HomeMade Organic & Cheap CO2 generator (more info in week summary) 9, 10, 11 & 12: The bud on the right is a Gorilla one, the buds in the left or/and in the middle are Money Maker ones. 15 - Same Gorilla plant buds, one affected by CO2 in the roots and the other not. -----WEEK SUMMARY----- The smell is more sweet and intense every day, friends that came home turned them eyes into crystals when they see this little babys. The size isn't awesome, but the high ammount of buds full of crystals plus the strong sweet aroma makes them awesome. Buds are growing and fattenning very very well. This week i added a boost of HomeMade CO2, i never measured the results of this invention so i can't give CO2 measurements. This method is widely used in home aquariums and there is where it comes from. For those interested i'm going to write here more detailed instructions. The 4 liters i've made will last for about 2 weeks. ---NEEDINGS--- - 250 ml Bottle - 6~10 l Bottle - 400 g Sugar / l water - 1 Envelope of organic baker's yeast / l water (CHEMICAL WILL NOT WORK) - 3 mid plastic tubes 40~50 cm - 1 short plastic tube 5~6 cm - 4 tube adapters - Hot glue to seal adapters The process of creating CO2 is simple, mix water, organic yeast and sugar in a bottle, and the sugar will free CO2 in the process of fermenting to alcohol due to the yeast. 1. Make a hole in the center of the big bottle cap, insert an adapter and secure it with hot glue 2. Make 3 holes in the small bottle cap and glue the other 3 adapters 3. Link both caps with one of the mid tubes and insert the other tubes on free adapters 4. Insert a short tube in the bottom of the small cap in the adapter that came from the big cap 5. Watch the Video!! -----WATERING CALENDAR----- Plants are beginning to drain the pots a bit faster so from now on i will raise the water ammount on each watering day 0.25 l. 11/05/19 - 1,5 l with All week nutrients -(Nirvana & Blombastic) also Big Bud half dosed @ PH6.4 & 2 E.C. 14/05/19 - 1,5 l with Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym & Blombastic @ PH6.4 & 1.5 E.C. *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- 5: Generador de CO2 casero, barato y orgánico (más info en el sumario semanal) 9, 10, 11 & 12: El cogollo que sale a la derecha es de una Gorila, el de la izquierda y/o el de en medio son de una Money Maker 15: Dos cogollos de la misma planta, uno afectado por CO2 en las raíces y el otro no -----SUMARIO SEMANAL----- El olor es más dulce e intenso día a día, los amigos que vienen a casa a verlas se quedan ojipláticos al verlas. El tamaño no es una maravilla, pero la gran cantidad de cogollos llenos de cristales añadido al aroma que entra por las fosas nasales las hacen increíbles. Los cogollos crecen y engordan de maravilla. Esta semana he añadido un boost de CO2 casero, nunca he hecho mediciones de los resultados por lo que no puedo darlas. Este método es ampliamente usado en peceras caseras y de ahí saqué la idea. Para aquellos interesados dejo aquí instrucciones más detalladas. Con los 4 litros de agua que he preparado yo da para unas 2 semanas. ---NECESITAMOS--- - Botella de 250 ml - Botella de 5 a 10 litros - 400 g de azúcar por litro de agua - 1 sobre de levadura de postre orgánica (LA QUÍMICA NO FUNCIONARÁ) - 3 tubos de plástico de tamaño medio 40~50 cm - 1 tubo de plástico de tamaño pequeño 5~6 cm - 4 adaptadores para los tubos - Cola caliente para pegar y sellar los adaptadores El proceso de generar CO2 es simple, mezcla agua, levadura orgánica y azúcar en una botella, y el azúcar liberará CO2 en el proceso de fermentación a alcohol. 1. Haz un agujero en la tapa de la botella grande, inserta un adaptador y séllalo con cola caliente 2. Haz 3 agujeros en el tapón pequeño y haz lo mismo con los otros 3 adaptadores 3. Conecta los 2 tapones con uno de los tubos y conecta los otros 2 tubos a los adaptadores restantes 4. Conecta el tubo pequeño en la parte libre del adaptador del tapón pequeño que viene del tapón grande 5. Mira el vídeo -----CALENDARIO DE RIEGO----- Las platas comienzan a secar los tiestos un poco más rápido, asi que de ahora en adelante incrementaré 250 ml de agua adicionales en cada riego. 11/05/19 - 1,5 l con todos los nutrientes semanales -(Nirvana & Blombastic) BigBud mitad de dosis @ PH6,4 & 2 E.C. 14/05/19 - 1,5 l con Bud Candy, Big Bud, Nirvana, B52, Bud Factor-X, Sensizym y Blombastic @ PH6,4 & 1,5 E.C.

After deciding to start this new growing journey, I chose to germinate a Banana Purple Punch seed from Fast Buds. This particular strain caught my attention with its unique characteristics, and I couldn't resist giving it a try. I began by using a hydrogen peroxide water solution to germinate the seed, which helps oxygenate the water and prevent harmful pathogens. After about 36 hours, the seed cracked open, revealing the first signs of life. With a taproot emerging, I carefully transplanted the sprouted seed into a 20L airpot, ensuring enough room for the roots to breathe and grow freely. This marks the beginning of an exciting new adventure, nurturing this intriguing strain to its full potential.🌱💚 _________________________________________________________________________________________________________________________________________________________________________________________________________________________________ One of my cannabis seedlings unfortunately didn’t survive in the pot....😭 Now, I’m trying again with two more seeds of the same strain, but I’ve changed my approach. Once they've successfully sprouted, I transfer them into coco tablets. There, they’ll remain until they’ve developed healthy roots before being moved to their final growing environment. I’m hopeful that this method will help me handle the early phase of the cannabis plants more successfully, and I’m excited to see how things turn out.💚💚

What was it like this week? It was irritating. This site is sucking. Upload a vid that takes so long to upload to just have the save sign spin and spin. Then have to reupload. Your admin sucks the bag.

Day 141 still going started to reveg but lowered light schedule

De prachtige koningin is geoogst en hangt aan de drooglijn. Ik zal de uitkomst delen wanneer de toppen droog en rijp zijn 👌

Switched spots in tent to see if Purple Kush darkens up a bit. pH at 7 again over night, so I dropped it back down to pH 5.5 Next day Purple and Pink Kush had pH around 6, so I dropped it a little again. Is it normal for pH to change over time? Purple Kush still shows signs of getting darker leaves starting at the tips. I will give another 2 days to see if the lower pH helps. Purple Kush seems to be getting color back through out it's leaves. Not a gradual change, but blotchy dark green moving back in I hope. Pink Kush and Purple Maroc seem to enjoy the addition of a CO2 generator. I expect this time next week to have flowers on the Pink and Purple Kush. See you next week....

Tag 44: Die Pflanze wächst ausgesprochen gut was immer sie für "Eine" ist.

Sept 10th, I visited the girls today, So much work...reinforcing, pruning, mould checks. In the greenhiuse things were quiet. No storm there just a crowded space with little airflow and too many buds and leaves to ripen properly. I removed all 2nd grade branching, especially form the lower branches and mains bus. where buds were growing jnto eachother. No more water from now on... nothing. Praying for a few sunny days. Ive set dates for harvest depending on mooncycle ...please ladies, hang on! Best to all of you this fall!!

Esta semana fue divertida, tocó hacer el topping y el LST. Con respecto al primero, creo que podría haber esperado más tiempo ya que las ramas laterales del tercer nudo estaban muy chicas, pero estoy buscando estresar lo menos posible a la planta así que decidí hacerlo el día 40. Espere dos días a que la plante se recupere y las ramas comiencen a crecer e hice el LST. Hice un vídeo del topping + LST. Con respecto a los inputs, los primeros días de esta semana llovió mucho y las plantas se encuentran bajo un techo mínimo por lo que algo de agua las regó. El día del topping regué con FPJ y el día del LST regué con Compost tea + Melaza orgánica. Esto ha sido todo por ahora... Cualquier sugerencia es bienvenida! Buenos cultivos!😃

Setting up the garden of my dreams - Scroggernaut 2.0 "either yer scroggin er yer not" Old grow was a 4x4 closet inside a garage. New grow will be a 8x10 room with a 4x8 and 2x4 in 2020, and adding at least another 4x4 in 2021. My son will be learning how to grow this year in a dedicated 2x4 space, soiless mix, hand water. The additional 4x8 will be in a dutch bucket recirculating system (Thanks to GreenMachine for the advice so far, coming for more). All tables will be custom designed and made by me. Genetics will be a mix of Original Sensible Seeds (Bruce Banner #3) In house genetics (Slurricane ix) and some FastBuds testers So far in 5 days I have built the structure, and completed most of the insulating. Wiring before I finish the walls to save some future headaches. Lighting will be 3 x HLG 550 clones over a 4 x 10 foot area. This gives 36 LED watts per sqft, and the PAR rating on these lights is insane. Should be more than enough light. Thank you to XeenRecoil for the advice on Samsung LM301b and h diodes Spend so far: Materials = $405 Lights x 3 = $1650 (good deal - Yuanhui LED on Alibaba - Abby Zheng is the best) Pump = $30 @ 70% off

COLOMBIAN JACK BY KANNABIA Week #8 Overall Week #8 Veg This week she recovered from being topped and being pruned she's going great it's also crazy hot right now and she's dealing with the heat she's got some great genetics!! Stay Growing!!

Bonjour à tous, ces derniers jours ce sont bien passé pour mes petit bébés elles grandissent doucement mais sûrement.C’est la première fois que je travail avec cette gamme de produits (je vous est mis des photos des produits 😉) pour l’instant j’en suis satisfait après, il faut voir le résultat final ce qui est moins facile 😂. Mes petit bébés commence leurs 5ème semaine (je me suis trompé d’une semaine 😕 désolé 😉) trop pressé!!! 😂 de mettre de nouvelles photos 😜. Je vous dis à là semaine prochaine vivement 😉 bonne journée à tous. Je vous remercie 😉.

King of best

March 10 - 17, 2025 Lots of activity and growth in the tent this week. After resolving two run away events with the Blumat system and the carrots in Anastasia and Carol Anne that I think are finally resolved. Anastasia’s moisture curve is between 90 - 110 mbar. And the other two are also stable. They are going through about 1/4 of a gravity feed 5 gallon bucket mounted 5 ft above the soil and outside the tent for easy access. I am now mixing a bucket batch with 2.5 gallons of plain RO water ph leveled to 5.8 with an average temperature in the low 60 degrees. I am still using the 10 part - General Hydroponic nutrient line feed chart on week 4+ moderate feed and am mixing into two gallons on RO water with an average temperature of 60ish. Using the following nutrients in the exact order which is important to follow to avoid mixing issues. 2 gallons fresh Reverse Osmosis filtered water with a base zero EC level. Silica = 5ml Calmag = about 4ml General Hydroponics Flora Series 3 part nutrients: FloraMicro = about 11ml FloraGro = about 14ml FloraBloom = about 8ml Additives: - General Hydroponics FloraBlend = a out 10ml - General Hydroponics Floralicious Plus = 3ml - House & Garden HGDPC002 Drip Clean = 8ml Last step is to level ph to 5.8 My nutrient batch ends up at 5.8 ph with an EC level of 2.0 at about 60 degrees f. I then pour the 2 gallon nutrient mix into the 2.5 gallons of plain RO water to dilute the solution per sustainable village blumat system recommendations. The final batch usually requires a final ph spot check and minor adjustments. So far the planned schedule based on a current 4 day depletion rate will be to start with s fresh mixed batch as mentioned above. When the bucket level reaches 3/4 empty i replenish the bucket to 1/2 full using plain RO water ph leveled to 5.8. Then top off the bucket with another 2 gallons of nutrient rich mix as mentioned above. This increases the EC level to about 1.25. Then on the second reservoir depletion I will let the bucket drain to close to the empty level without letting it go dry. After the 2nd replenishment is almost gone i will do a 3 gallon hand watering with a mix of Real Growers Recharge - Mycorrhizae Instant Compost Tea/Soil Microbes mixed into each 1 gallon poured into each pot. This achieves 3 things, the first are the obvious benefits of better nutrient intake. It also allows for a good drain to waste to help flush salt buildups. Lastly it saturates the pot moisture levels down to the low 70-80mbar range and essentially temporarily deactivates the blumat system and prolongs the call for water and nutrients from the reservoir for an extra 12-24 hours until the pots dry out to the blumat carrots calibrated settings of about 110-120 mbar. I will have to adjust as I switch to flower but overall, now that the blumat system is dialed in and I understand it better I find tat it is very effective at keeping the tent environment more stable ad efficient. The plants seem happy as shit and maintain Ing a reservoir with a bi weekly hand watering flush is so much better than my old ways of mixing 2-3 gallon nutrient batches and hand watering/feeding and dry vacuuming it all up every two days is way better and less wastefull and more sustainable. So far It appears it was worth the investment and the test of my time and patience. The week was also full of a few defoliation snd lollipoping with plenty of scrog net low stress training to continue to fill out the canopy. Drizzella (right) is still stealing the show and dominating her presence in the tent with 30-40 potential cola points. Anastasia (left) is smaller than her sister but is responding well to all the LST and defoliation. DD he has significantly less potential cola points, but her fan leaves are larger but also softer or more silky feeling. Carol Anne (middle) continues to be a short stubborn and mesmerizing cultivar. She resembles a head of lettuce and is so strikingly different than her two cousins. I rounded out the week with continued VPD monitoring to maintain about 1 kpa with an average leaf temp offset of -3 degrees. I then pulled the Vivosun Aerolight 150SE led light from my smaller and currently dormant 3x3 tent and installed it in the 3x5 tent. Even though the AC infinity Ionboard is doing the job on its own. I added the second light for better light distribution across the tent as I was getting good DLi levels in the 30s in the middle of the tent but it tapered off to low 20s near the walls. After adding the second light I am now achieving PPFD rates of 500-600 and DLI levels in the low 30s from wall to wall and i think it will make a good impact on growth and a more efficient tent environment as The added circulation from the built in fan on the light, as well as increased heat generated from the lights is demanding less from the heaters.

This week i flushed both plant but the Burn was very Bad