Recommended
Likes
Comments
Share
@Naujas
Follow
Day 89!!!! I came back from vacation and started harvesting right away, so the girl grew really big, but I gave her too little light, and at the end of the growth I didn't remove the leaves :( because I was busy on vacation :( but basically I'm still incredibly happy, her flowers are not very firm, they have a lot of "AIR", but a lot of shiny sticky trichomes, the girl grew really well throughout her growth, next time I will definitely use LST, this growth was with very little LST, there will be an update when the harvest dries up :) good luck to everyone:).
Likes
48
Share
Hey fellow growers week 4 update of my blue dream grow!! So far this grow has been a smooth steady grow with little issue besides some heat issues. At 26 days old blue dream #4 showed sex!! At 27 days old blue dream #2 showed sex. The ladies seem to be liking feedings so far... this is how its looking for the week... 1/4/2022 1ml micro 1ml gro 1/2ml bloom 3/4ml ph down Ph 6.41 335 Ppm Solution temp 73.7F 1/6/2022 1ml micro 1ml gro 1/2ml bloom 3/4ml ph down Ph 6.41 335 Ppm Solution temp 73.7F 1/8/2022 6.4 ph Watered 1ml ph down 180 Ppm Solution temp 73.2°F I am still affiliated with viparspectra so if u are interested in purchasing their product use this discount link to save you 💰 https://www.viparspectra.com/?aff=Wackytabacky420&utm_source=affiliate Well that's it 4 week 4 update till next week stay zooted fellow growers!! Best of luck and Happy growing!!😎🌱💚💪🏻🤟🏻🙏🏻🔥
Likes
3
Share
@ASCBOOGS
Follow
Start of week 8 feeding at EC 1.0 then water only the following week
Likes
1
Share
Very big girl for sure hopefully she will finish as hermied a little bit so far pulled few banana 🍌 sacks and checking her every day buds are looking a bit funny but all of them so i will ignore for now and keep an eye apart from wow she is big yielder
Likes
9
Share
Harvest day 62 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 16-18 degrees and 55-59% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. . The smell is great I'm curious about the taste 💚 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
37
Share
Happy 4/20 all... Still on auto pilot. I've made very few changes this week. Process/Environment changes: -turned one of my ts1000s down after chopping my cheese auto.. it wasn't needed as much and it helped cool down my tent around 2 degrees Celsius. - humidity is set between 45- 55 percent. (45 lights off, 55 lights on) - rotating each plant in the tent so they they can get even light coverage I'm going to do a trichome check on Saturday. They are both pretty much close to being finished at 62 days post germination. Both have heavy trichome production Both smell very sweet
Likes
1
Share
@BruWeed
Follow
Se secaron rápido. Los cocos son pegajosos y tienen aroma muy fuerte. En humedo me dio 150g en total. Tengo que esperar que se sequen para ya saber el resultado final.
Likes
11
Share
@CalGonJim
Follow
12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage
Likes
6
Share
Esta semana a estado marcada por un excelente desarrollo, ya esta culminando el desarrollo de los capullos para dar inicio al proceso de engorde de las flores.
Processing
Likes
29
Share
28-10-2018 Filling in quickly, nice blend with the Gorilla Glue, managed to make a few clones last week before changing to 12 cycle. hope they can stand the wait until this round finishes in 8 weeks if not i will just re clone again off the clones lol 31-10-2018 Halloween and the girls are wearing their best costumes. GG are really starting to beef up, There are quite a few buds under the screen, would have been a ton better had i started training earlier on. Some new pics of the progress. Enjoy! 1-11-2018 White Widows are showing signs of flowering and the Gorilla Glue are pumping it up
Likes
30
Share
These beautiful lil ladies are coming along nicely eating very well! Not bad for my first photos
Likes
50
Share
@Hou_Stone
Follow
Here are my 3 nori cake that i keep 👶 They look in good shape to me💪🎊 For this grow, I plan to let each plant grow with a large main bud, without topping. Next week I will cut the lower branches closest to the ground. ----------------------------------------------------------- 💧Watering each pot: day 9 : 1L day 12 : 0.5L I use tap water, adjust the ph to around 5.8 and water ------------------------------------------------------------ 🤩Equipment of the week : Light FC3000 Mars hydro. power 80% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat Romberg 95x95cm. ON 45 minutes. OFF 30minutes. In a loop I am adding anti-midge bird stickers 🐦 ------------------------------------------------------------ Thank you for your visit and your support with the likes, comments. It's always nice to see you!💚 ------------------------------------------------------------ My Instagram 🌱❤️️ : https://www.instagram.com/hou_stone420/
Likes
39
Share
Another week Another round of topping..we're on 32 tops now so depending on how long the other girls take its probably the last round... she's not a big girl by my own doing but once I transplant her into a 5 gallon I feel like she'll explode with growth..I plan on staying in veg atleast another month..hope all is well and thanks for stopping by
Likes
8
Share
@FarmerT
Follow
Both front lsd25 autos are growing good the back left big bud auto is doing great and the cherry cola on the back right is slow but showing signs of growth(4 days behind others)
Likes
21
Share
These videos are from yesterday and we’re on day 5 of flower. Been MIA trying get this girls back to being healthy. I think they’re pretty healthy these days for sure. I did a bud leaf strip yesterday and some super cropping as well. This strain takes 8 weeks to flower completely. Looking forward to seeing how they turn out! ✌️🏾
Likes
7
Share
@gablmo
Follow
Another busy week with the vege. I gave it microbes, a HID lamp at 400 watts, sprayed for bugs and also covered the media with plastic wrap to get rid of 3 or 4 gnarts and of course a had another flood with the GoGro water system and I took one plant out of the garden because she is frozen in time. I still don't know why. The trellis is doing good. Lots of work.
Likes
26
Share
Nice lovely buds with an great smell of... Gelato(sry better taste than any weed I smoked before) energy relaxing potent yielding anything good till great. A. Real keeper. Fast! AND, the smell, is from roses.. karamel cookis., i never had this before sweet, but not overall. Another terpenes.. Nelks?? for Real! Like an GELATERIA if you open the door and you step inside. Just Great... Ahmm by the way... 😛 💪 Women can't resist this smell!!! Damn 10 points i should gave. For real. Its not normal. Good, good, 👋 Hallo, wenn ihr mich fragt ziehe ich die Gelato 41 fast der Gelato 41 vor. Schmeckte mir besser, sah schöner aus. Die fast Version.
Processing
Likes
8
Share
Likes
36
Share
Hey everyone 😃. Due to the lack of space in the flower tent at the moment, I decided to use a delayed LST for the 2 women 🙂. So I can let them grow again in the next 30 days until there is room in the flower tent 😄👍. I'm curious to see how they will recover, and I think that growth will continue in the next 48 hours 👌. I wish you a lot of fun with the update, stay healthy 🙏🏻 and let it grow ☘️🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .