Fattening and Stacking! 😍Ladies are doing great, no pests, no extreme weather. Noticed a slight potassium deficiency in #2, will correct at next feed. Only about two weeks or so left! 🇨🇦❤️🌱😎💨

All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 56 Took some glamor pics with black background - not really for vanity (although there's a little) but for contrast. I see more of the lockout issue better in the pics this way. - on that note, the ph seems to be working as it's been two days since defoliation and knitting needle ph correction, and the progression is way slower than it was on the last leaves at 3rd day of identifying. So with that, room VPD of 1.07kpa seems stable enough with temps about 76F/65%RH/33%ILV I released the binds today to let her grow without them until they crowd each other too much and I need to restrain - so in a couple of days at max. Day 62 Transfer day. Although at first I didnt think I would be able to until Saturday, I got pots and plant saucers today, so I ended up going ahead and doing it. Started by calibrating/testing both meters. Double checked the soil mix from yesterday as the last time I used wood ash the ph rose the day after... however this time it was fully mixed to I wanted to know if there would be a higher ph - it was the same as yesterady - 5 reading avg of about 6.35 - the slurry of 1:1 soil and 7.7 ph water was tested at 6.3 also. Made about .75 gallon of 75/25 veg/bloom juice water at 500ppm feed water. Tried to ph read the soil in the pot and seen it go from 6.6 down to 6.35 (took video) in the dry soil, so I decided to use the 6.35 new soil reading and ph balanced the feed to that. Used the needles since it was 7 days since the last feed and I am using such a small amount. Poured over needles in 8 places and pulled each out to let water down. the vacuum pulls the water down when I lift the needles. Then I mixed 5tsp of Dynomyco to the 5 gallons of new soil and mixed really good. I placed a layer of perlite on the bottom of the 10 gallon pot and then layered in some soil. Then with the help of my wife we pulled the plant out of the pot and placed it in the 10 gallon. I place back in the tent and added about a quart of plain de-chlorinated water evenly over the new and older soil to help bind them. I reduced lights by 100ppfd to have about 505 and 500 at center colas and 430 lowest on outer ring with most at 450 and 470 highest. Soil to light is 35 inches and the plant is about 14 inches so about 21 inches from leaves to lights. I left the ring off today and will rebind as needed tomorrow after she rests. Today the leaves look wilted and limp. Also reduced humidity to 60% so 58 to 65% should be the range and the temps are 73F with the lights lower. PPFD was higher with the new growth - unbound and tucked in for better cola/light position, it reads 570 to 580 on outer colas and 590 at both center branches Day 57 Getting 1 more day out of free range growth before I tie her back against a ring. So in that time I decided to take a few vanity pics. Overall the ph block seems to have slowed or stopped and she's back to growing again. Will be thinking about flip at the end of this week or so. VPD same stats 76F/65%RH/33%ILV - ppfd right at max so I'll likely tie her off tomorrow. 605 600 in center and 580 to 590 at the outer ring. Day 58 VPD stats mostly steady again today - 76F/65%RH/33%ILV - ppfd was checked after LST, measured 600 at each center cola and the outer ring measured between 550 and 590 most at 580 So as I said, I did LST today to bind her more out while the 4 center 4 colas fill the middle. I had to bind to the pot base instead of the ring as the colas are still a little short to reach for binds at the ring just yet. There's a lot of space to fill and a few (about half) of the out colas are sideways for now. Had a break at the center cola when I tried to pull it back for bind. I knew to hold the branch at the node but forgot to do it here and heard a "snap" ... taped the crack and moved on - will monitor obviously Day 59 Did more light LST to ensure the branches are growing where I want. PPFD was mostly the same as yesterday only now there are more colas around 560 than 580 on the outer ring with the center colas at 610 and 590 (front cola was tied down to spread more away from the ring and fill center better. vpd same as past week or so 76F/65%RH/33%ILV Last feed was on day 54 and the soil still seems damp so I will check again tomorrow for the next day. (Day 61) The broken branch doesnt seem to have affected either side of the split as both sides seem to have grown a little with little to no wilt or drooping leaves. Im hoping it heals okay and doesnt delay flip to recover more; still monitoring. Day 60 Did some light LST today by releasing the lower binds to the pot and attached as couple to the outer ring now. So far I only have to bind a few as most are already holding where i want them to. Took the tape off the split and seen I didnt seel the gap closed when I taped it so now Im considering a drop of super glue to bind the branch back in hopes it grows onto the other side again. If not at least it would be more secure than it is now. And since it's a main split for 4 colas, I dont want too restrict it by binding at the split and potentially cutting off the nutrient pathways. ppfd after LST was 610 and 600 after more LST and the outer ring is still ranging 550 to 580 with more at 560 now. VPD same as I havent messing with any of the variables. 76F/65%RH/33%ILV Soil is a bit dry and it's been 5 days since the last feed flush, so I have about 3 gallons of tap burning of chlorine now for a feed tomorrow morning. Might still update again later if I find superglue... found some superglue - tried to take pictures but I cant hold, squeeze the applicator, and film with just two hands. So the idea gets through, I did both sides. On a side note I discovered a root popping out of the soil from the top. Covered it up but wasn't sure if I should be concerned. Day 61 VPD same as it's been for most of the last week - 74F/65%RH/33%ILV PPFD was recorded after I turn the plant a quarter turn for the smaller colas struggling to get over he ring's edge to have more light. Most colas at 580 with a couple at 600 and a couple more at 550 - center colas are hitting 615 and 620, but I have plancs to reduce in the next couple of days now On that note, the root growing out of the top tells me that she's hungry and needs more root space, even if that means growing through the top of the soil. So I plan to transplant to a 10 gallon and flip after the recovery. After reviewing more of NugBucket's journal I realized this is why he moves them when growing 16 colas. New pots should be here Friday so I should be able do it on Saturday. So I prepped soil (using more Happy frog with mycorrhizal fungi already growing in it for a few weeks) with de-chlorinated tap water Started by ph testing the soil and the water (4 readings on soil at 5.03 avg) - added about 1/2 cup total of wood ash to bring up the ph , mixed and tested again - added water at (about 7.7 ph) and tested again... last 5 readings in soil was 6.24,6.3,6.35,6.37,6.38 avg of 6.328 - covered and let rest until needed. Since I plan to transplant in a few days I felt it would be best to 'lightly' feed tomorrow, again on transplant day, and again 2 to 3 days later. Since my wife was taking pics at this time, I could only find this one to show the roots growing into the perlite then we planted it in the bigger pot. -------- (Day 62 root base picture from above) I have a hypothesis that says these are so short because I intentionally tried not to move the plant without the base stand to keep it from grinding these up and allowed them to grow in the last 2 weeks. This is that test picture/results. I like the idea of better/more drainage, but thinking I am doing more harm each time I hear those gravel pieces crunch as it cuts those and forces the plant to look somewhere else for root space. Notice how the small root lines have no finer pieces or laterals grow out from these - I believe that is because they are so new in growth and that the perlite chewed up the smaller laterals even with little to no movement over the last two weeks I would like to see a root ball experiment that exposed the roots throughout the grow but for now I can see these roots do grow into the base perlite and need to be handled carefully if you want them to grow more freely or with a standard pot size. As you can see Im not root bound but my plant thinks it is and is growing roots out the top.

Лимонад продолжает мутировать. Была надежда, что всё успокоится, но каждый следующий узел был кривой и не симметричный, и в результате всё пришло к раздвоению основной колы, теперь у меня их две😱(см. фото). Я на 99% уверен, что не потеряю в качестве урожая, но почти также уверен, что потеряю в количестве😥 Все растишки показали пол(кто же сомневался? 420!), у лимонада начался предцвет. Поднял лампу, раздвинул горшки, примерно так они и будут стоять до конца цикла. Обрезал ручки с мешков, они мне только мешали. Спасибо, что заглянули, и будьте здоровы! 🙏 Продолжение следует ...😶

During a beautiful spring evening somewhere in May, the idea came to me to choose for a new hobby. And because I enjoy gardening very much and also like to smoke a joint, I decided that night to try to grow my own weed. And I also wanted to challenge myself to grow the best weed I possibly can. That's when I started to read up on all the facets of growing cannabis. From materials to technique, from strains to the anatomy of the plant, I prepared myself for at least 2 months before even one seed went into the soil. And partly because of this thorough preparation, I can now say to myself afterwards that this is the maximum I managed to get out of it. And the great thing about all this is that after these past 4 months I have learned so much more! Therefore I already know for sure that my next grow will be even better. Below some tips for my fellow newbies, they might help you during your own grow... Material In addition to the lamp, the tent and the right nutrients, which I commented on above, I have benefited a lot from a humidifier and dehumidifier over the past 4 months. Especially in the first weeks of growth, a humidifier is very useful so that you can keep the humidity around 60% (or what the VPD chart tells you depending on the temperature). During the flowering phase it is very useful to use a dehumidifier so that the humidity remains below 50% and at the end of the growth even close to 40%. That way you also exclude the risk of mold and bud rot. It is also useful to use these devices during the drying process so that you can keep the humidity around 60% and dry your weed slowly (at a temperature of around 15.5 Celsius, drying takes about 14 days). Drying slowly and coolly definitely benefits the smell and taste! What's also really a must are an EC and pH meter, without these 2 instruments it is actually not possible to realize a perfect grow. Make sure you use a reputable brand like Apera, they are a bit more expensive but always deliver spot on. In total I invested about 1500 euros in material on my first grow. This is also because I wanted to do it perfectly and therefore only went for quality products. But all in all I think I earn back my investment within 2 runs, taking into account that both my friends and I will never run out of a joint 😊 Seeds Good genes are important to ultimately achieve a good end result. Therefore, do not save on the seeds and buy them from a reputable breeder. That way you can be sure that you will grow strong and healthy plants that can withstand pests and other negative influences. Well begun is half done and this is especially true when growing cannabis. Technique Of all the training techniques I have used, I would like to specifically mention one that surprised me the most: Supercropping! Because I did this grow using the ScrOG method, I wanted to create as even a canopy as possible. The type of lamp I use is also most suitable for this method. But no matter how well you train your plants, they will eventually stretch unevenly during the first weeks of flower. I therefore snapped about 8 stems using Supercropping, which made my canopy nice and even again in a way that each branch gets the same amount of light. And the colas on those branches turned out SUPER nice! Also the nuggets beneath were growing bigger because they too got more light. I will certainly use this technique even more in my next grow! Will I will definitely use a diary again I will definitely use VPD charts again I will definitely use a feeding schedule again I will definitely turn my light on during the day and off during nighttime again I will definitely use the ScrOG method again I will definitely choose a feminized American strain again I will definitely use a webcam again (Wyze Cam) I will definitely defoliate even more during the 4th week of flowering I will definitely go higher on lollypopping I will definitely Supercrop more I will definitely dry my plants slowly and cool again (15 days at 60% RH and 15,5 C) I will definitely continue to learn more and prepare myself even better for my next grow again 👊 Won't I will certainly not water my seedlings too much again 😅 I will certainly not go for 3 plants again, but instead for 4 plants per m2 I will certainly not hesitate to ask experienced growmies for help again 🙏 (next week I'll comment on the bud dry weight and give my final smoke experience)

Clones got transplanted into my organic recycled soil in solo cups and under the dome. Under 300w LED QB dimmed at 50% Watering with tap water. My live soil is packed with nutrient's and minerals so there’s no need to add nutes for now.

Última semana de crecimiento de las Originals de GrowBarato. Las aguantamos bastante tiempo porque quiero sacar buenos árboles y llenar bien el espacio de verde. El crecimiento es normal el color verde que tienen es normal también se ven bien sanas. Se ven frondosas tienen bien de vegetación. Va todo sobre ruedas si me gustaría meter algo más de potencia en este armario que igual 150w se quedan cortos. Spannabis 2023 a sido increíble ya tengo ganas de que se haga el año que viene porque la de 2020 me quede con muchísimas ganas, conocí a muchas gente del sector que ya conocía por redes pero por fin nos ponemos caras, y lo dicho increíble la innovación de los productos , las genéticas que se llegan a ver, y los stands pfffff, de 10. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 25 grados y las mínimas no bajan 19, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨

Metemos un último apretón de comida porque la planta lo pide y la resina y dureza de las flores me sorprende muy gratamente y el olor super fuerte!! Es una pasada como evoluciona de rápido y de bien. Se nota en alguna hoja como nos pidió un poco más de calmag y comida, pero están muy sanas y fuertes! Ya están cercanas a su última semana, ya tenemos a 30 cm el foco y las pequeñas están estupendas.😘😍

First 7 days of the Strawberry Gorilla from Fastbuds. She was germination in glass of water than move to cotton and in 2 days it had more than an inch of root so i moved to her home 12 liters pot with biobizz,coco peat and perlite for the vegitation she will have the Marshydro Ts 600 in 80 x80 grow tent.

Week 12 and the plant is still going strong. It’s fading fast and plumping up. Trichroms are about 80% cloudy and 20% clear. Almost no amber. At this point I’m only giving the plant PH water. Plant still looks like it has some weight to still put on.

Trimmed this week

Day 36 - In the picture, I demonstrated the efforts I put in for leaf tucking, the back half, so that light can get deeper in the canopy. A had also removed all of the flowering cover crop to prevent it from going to seed. It served its purpose and now serves as compost for my outdoor garden. Day 37 - This plant does not slow down! It is maxed out, for my preference, horizontally. Stretch is slowing down. Bud growth will now be the focus. Day 38 - She really needed a haircut, so she got one. Everytime I do this, I honestly scare myself. I know the potential these plants have, but a mistake that would cause additional stress to the defol can change everything.. cover crop is also cut down and breaking down in my outdoor garden. One last spray down before buds appear and a good feeding to push her through this heavy strip. Love to see worms hanging out on the surface of the soil, breaking down all my top dresses. Day 39 - She's praying to the skies! This plant isn't skipping a beat with vigorous growth! You can see how all those lower sites are now getting adequate lighting! Day 40 - Realized I had stopped adding picture to demonstrate her height. She's a great height! Honestly taller than I had imagined! Nodal spacing is super tight at the top. She's going to have some huge nugs! Really debating on getting another natural co2 generator to get higher levels during peek flower. Loving this plant!! Day 41 - Looks like I havent even taken any material off this plant! I almost wish I would have done a higher lollipop... I need to stop second guessing myself when I lollipop. Now I must ponder the thought of removing more material, or adding some side lighting.. excited to see these flowers start to stack! Day 42 - Life got a little busy for me. I stopped writing down daily changes or updating this. I still did my best to get daily pictures and videos. I will write about the grow as a whole when harvest day comes.

Day 57 - Yesterday I noticed that the leaves are darker than they should be, so I re-made the mixing solution lowering the PPM from 750 to 550. I've tried to raise it to see how much nutes that ladies can handle since it's my first time in coco and I like to experiment. Now I'm going to finish this mixing solution and then stabilize the next ones on 650 PPM. Keep learning every day 🙏 Day 60 - Today I added one extra equivalent 75W LED to give the lower nodes more power. Some fan leaves touch it, wish they will not burn. New update in the next days.

nov 30. megacrop 1.06gr/litre ph'ed at 6.30. about 450 ml dec 2. megacrop 1.06gr/litre ph'ed at 6.30. about 500 ml dec 4. megacrop 1.06gr/litre ph'ed at 6.28. about 500 ml LED is at 80%

Day 69 of flower (i know, video says 67) and what a weird time to shoot out nanners. There have been zero light leaks, and no kther plant in the garden has a nanner, leading me to beleive it is not a stress induced occurrence. No other flower on the plant contains a nanner. I will collect the pollen, and i will allow the polyploid cola to see itself aturally to harvest some S1's. These will be grown out and if i get another polyploid, the gene will be backcrossed to add to my lifelong catalogue. Thanks for looking, hit me up with advice, input please

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D77/B15 - 31/01/24 ⚗️ EC: 1.2 pH: 6 🌡️ T: 19-22 °C H: 40-60% (Min-Max values taken from the app.) 🌊 2L 🍗 CalMag - Bloom A-B - Bud Candy - Big Bud - B52 💧 💼 Thanks to the TM+ Pro app and the use of the Humidifier now the T-H of the enviroment is correct and i got quite good VPD (Vapor Pressure Deficit) rate 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D78/B16 - 01/02/24 ⚗️ EC: 1 pH: 5.9 🌡️ T: 19-25 °C H: 45-70 % 🌊 2L 🍗 💧 💼 🧠 Quite time to change res 🚀 🎬 Added Timelapse video, 3 pics and "TM+ Pro" App screenshots of T-H values daily graph, and quite perfect VPD daily rate ________________________________ 📅 D79/B17 - 02/02/24 ⚗️ EC: 1 pH: 6.2 🌡️ T: 19-25 °C H: 40-60% 🌊 🍗 💧 Added few drops of pH- 💼 🧠 The res was for many time on the upper side of pH range, so now I would like it to goes down to a more acidic solution. I'll do it on the next res change, maybe tomorrow 🚀 🎬 Added Timelapse video but today it was trunked because of a problem on the camera, but I posted it anyway ________________________________ 📅 D80/B18 - 03/02/24 ⚗️ EC: 0.15 pH: 6.6 🌡️ T: 19-25 °C H: 40-60% 🌊 RES Changed 💦💦💦. Flushing until tomorrow 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse video and VPD, T-H graphs screenshots ________________________________ 📅 D81/B19 - 04/02/24 ⚗️ EC: 1 pH: 5.7 🌡️ T: 19-25 °C H: 45-65 % 🌊 15L 🍗 CalMag - Grow A-B - Bud candy - B52 - Big Bud 💧 💼 Some defolation and sistemation of buds 🧠 🚀 🎬 Added Timelapse video and VPD, T-H graphs screenshots ________________________________ 📅 D82/B20 - 05/02/24 ⚗️ EC: 1 pH: 5.4 🌡️ T: 20-25 °C H: 52-84 % 🌊 🍗 💧 💼 Little defolation and raised up the lamp 🧠 🚀 I forgot the humidifier on manual mode, so H increased until 80%and VPD went out of control 🎬 Added 4 pics, one is from timelapse set. Added Timelapse video and screenshots ________________________________ 📅 D83/B21 - 06/02/24 ⚗️ EC: 1 pH: 5.0 🌡️ T: 19-25 °C H: 45-70% 🌊 🍗 💧 💼 🧠 pH decreased a lot and it's a good thing it stay on the acidic side for a while 🚀 🎬 Added Tmelapse video and screenshots of VPD and T-H

Gracias al equipo de Zamnesia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁MAC 1: La MAC 1 es una variedad muy solicitada, creada originalmente por Capulator y distribuida solamente a determinados criadores y cultivadores. ¡Pero ahora ya puedes cultivar este tesoro en casa y disfrutar de sus cogollos densos, jugosos y potentes! Gracias a su densa copa y vigor, la MAC 1 es una opción ideal para LST, poda apical y otras técnicas de entrenamiento (incluido el lollipopping). Cuando entra en floración, las plantas de la MAC 1 se estiran bastante y una vez maduras pueden alcanzar una altura de 160cm en interior y más de 180cm en exterior. De media, las plantas feminizadas de la MAC 1 necesitan un total de 9-10 semanas para terminar la floración, momento en el que estarán repletas de cogollos índica pequeños y compactos. 🌻🚀 Consigue aqui tus semillas: https://www.zamnesia.es/10906-zamnesia-seeds-mac-1.html Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Ha sido una buena semana, ella ha dado un gran cambio en su lugar definitivo 😎. Se le ha aplicado un tratamiento insecticida con agua + tierra de diatomeas ( 1 cucharadita por litro de agua), también se le aplica un tratamiento fungicida con una infusión de cola de caballo para evitar futuro moho. A partir de ahora se riega manualmente con las dosis recomendadas por el fabricante.

Broke a Top while trying to LST woke up and it was snapped. All three plants are showing different types of growth Plant 1 is Showing Sative Traits PLant 2 is showing Indica.Satava Traits Plant 3 is Short and stubby showing is hard Indica traits

Dear Friends, 👨‍🌾 👩‍🌾 we are here to show you our journey with the MIMOSA X ORANGE PUNCH™️ by Barney’s Farm. Germination started on the 10/11/2022, the root sprout on the 12/11/2022. ✅ VEGETATIVE week #5 📅this week goes from 12/12 to 18/12.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 14/12 eposom salts 2g/l foliar and 1g/l irrigation This new strain is hybrid produced from a cross between Mimosa Evo and Orange Punch. It is a mostly indica strain, so, short flowering and big and dense buds! It is one of the most colourful editions to their Cali Collection. This strain will surely be amazing, I can’t wait to smell the tangerine aroma and its sweet smoke. We are glad to have the opportunity to try this strain from this experienced seed bank, we will do our best to grow this baby as well as possible. THANK YOU Barney’s Farm ❤️❤️❤️ ***WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night....*** 🤓+DATA SHEET+🤓 MIMOSA X ORANGE PUNCH™️ Cannabis Seeds Strain Specifications Type: Feminised photoperiodic Genetics: Mimosa Evo x Orange Punch Effect: Euphoric, Happy, Uplifted Outdoor Yield (g): up to 1.5 kg per plant Indoor Yield (g):up to 700 gr/m² Flowering Time (days): 55 - 60 Indica %: 65% Sativa %: 35% Taste: Citrusy Candy Orange 💸💸💸💸💸 Buy MIMOSA X ORANGE PUNCH™️: https://www.barneysfarm.com/mimosa-x-orange-punch-552 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS: We are growing in BioBizz Light Mix, it is perfect also for the first weeks. TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Veg week two. Everything seems to be ok at this point.