Planted in 25L Pot with pre-fertilized compost soil and a little bit of coco, perlite and little pieces of old woodsticks. As a fly protection i use spiders and there web to solve this problem because thats the only one i have. So when you see in my tent, webs and the little bit of soil on the bottom what keeps the tentfloor dry and is also good for the spiders, please keep that in your mind.

The plant went crazy with growth this week, easily doubling in size (probably more). My tent is only a small one at 80*80*160 and this thing is now fully populated by plant. Can't beleive I managed to get 4 in here with my last grow, I guess they will grow as big as the space they are provided with when they are healthy and happy and this plant is definitely both. Things continued to warm up again this week, a few sunny days of 26c outside which meant my tent once again crept into the 30's for 2 or 3 hours of the 18 hour lights on cycle. On top of this, just to add salt into the wounds there were cold nights as well where the tent heaters were going full whack keeping things warm. To tackle the heat I ended up using a CO2 bag. CO2 was recommended to me by the Hydro shop and could help with the plant dealing with the high heats at times, guess I'll see. The plant also received the gift of automated watering, with the higher temperatures but also as I'll be away for a week for work next week I had to get something setup in advance. No idea why I didn't install an automated watering system with previous grows, was so cheap and makes things so much easier. Best of all the plant is loving more frequent drinks/feeds. Currently set to 4 a day at around 500ml each feed. When I started this gro my plan was to go nutrient free, and just use what the living soil offered. That only lasted through veg anyhow, now that it's flowering, I can see how much the plant is loving the Mills nutrients. Based on the growth in the last week I'd say the plants loving them a hell of a lot!!!! I think all the hard work shaping the plant is done now as the stretch is nearly over. Had no other option but to install a net during the week just to keep it down as much as I could. Only took a few days to fill it out and there's way too many bud sights now. If the plant had of stretched much more it would have to move into a larger house, but now the buds are starting to fatten I'd say it will be safe now. Couldn't be happier with this grow anyhow. Now just have to wait and see these buds fatten up.

Esta semana añadimos el humidificador para mantener una humedad mas alta. con 14 dias asomaron las raices y las trasplanté en la maceta definitiva de 6L. y aumenté la potencia W a 220. De 150 a 220W.

Just put them into flower.

Had a lot going on this week so the plants didnt get any care or maintenance at all other than just checking on the water level a couple times. They need some major defoliation which I wanted to do this week but procrastination is the vibes currently. Will probably get some done next week.... the plants are looking good and most of them are bushing out pretty nice. They dont seem to be stretching as much as they normally do by this time, but they are transitioning to flower. Will probably do a flush and water change soon since they haven't had one in over a month. I'm just anxious to see some frosty buds at this point.

The seeds of Red Pure CBD showed impressive vigor right from the start. After just 32 hours of being planted, they had successfully germinated, with small, healthy roots emerging from each seed. Following germination, the seedlings were given their first exposure to light at the 44-hour mark. At this stage, they appeared strong and well-prepared for the vegetative phase. The rapid germination and early light exposure have set a promising foundation for the growth journey ahead.

fast growing auto, overloaded on nutes with this one but she still produced beautiful buds

11/02/21 Вытащил все зацепы из почвы чтобы перераспределить ветки. Сделал легкую тренировочку LST. Установил дополнительный свет из COB LED чипа (мультиспектр) на 50 Вт с линзой. Скоро с aliexpress придет второй такой же чип и после этого я уберу ЭСЛ105 Вт. Собрал еще один дополнительный светильник из 2x COB чипа (по 10 Вт каждый) с цветовой температурой 3000К. Завтра повешу в бокс. 12/02/21 Опрыскал из пульвика водой. 13/02/21 Полив водой 1 литр. Оборвал нижние веерные лопухи и перераспределил ветки, т.к. они начали вытягиваться. При тренировках начинаю чувствовать запах от растения - он приятен =) 14/02/21 Установил вентилятор поближе к растению, опрыскал из пульвика водой. 16/02/21 Полив раствором GHE: 1,5 литра воды отстоянной кранухи + MGB (3ml/2ml/3ml)

Everything going well some have shot ahead think was due to over watering others but other than that all look to be coming on fine more care and attention from now on 👍🏻✌️🏻

About 1-2 weeks left in these girls. Tent has pungent gassy but sweet fruity smells, Buds are stacking up.. couple are ripening earlier.. Following High Powered Organics Gro-dirt Gro-Guide.. More info @highpoweredorganics.com Cheers Legends

Day 3 Light LST as stems are still growing, but nice and green. Clean pots is always a must

Really nice plant. Very strong smell, Well THC coated buds and very nice effects. Lovely.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.