Likes
Comments
Share
Week three in flower 🤪 bud candy definitely getting great results from it. Highly recommend this product! Upped PH and dropped 10 degrees when light off.
Likes
2
Share
Week 7 of Bloom just one more week to harvest!!!
Likes
2
Share
@xTaps
Follow
25.06 FD33 Nutrients: 2.6 ml Biocanna Flores 0.6 ml Biocanna Rhizotonic 3,6ml Bio Boost
Likes
7
Share
1/16/2023 - Day 14: not much new to report. All 6 plants are continuing to look healthy. The Grand Prix seem to be a bit smaller than the Frozen White Runtz and Ice Bath. They all look good though. 1/18/2023 - Day 16: clipped a leaf off each Grand Prix to send it in for a genetic test to determine the sex. I used Farmer Freeman. Nothing else to report at this time. 1/20/2023 - Day 18: watered all 6 plants and foliar fed with the same water. Ph was 6.6, and mixed with ThermX-70, FishShit, Rootwise Micro Complete, Pure Protein Dry organic fish fertilizer, BuildASoil Big 6, Rootwise Enzyme Elixer, Fermented Comfrey Extract, and Yah-Whey Thrive. I know I went crazy, but might as well use it if I have it. 1/21/2023 - Day 19: Plants are looking happy. They obviously loved the feeding yesterday
Likes
21
Share
Very good week hopefully will start packing on the buds soon, giving bio bizz bloom now. Defoliating a lot and the seems to be working well, watering everything 3-4 days. Daytime temp going from 20-26 and dropping from that to 19 at lights out
Likes
18
Share
@Luv2Grow
Follow
The grow was overall very smooth and definitely pretty quick compared to others but could be because she wasn’t a very tall or high producing plant. I’m sure it was something I’ve stunted along the way early on but could of also just been a runt seed. Either was 120 grams, I’m happy with. She took a well to LST along the way and didn’t have to do much defoliating with her. Looking forward to sharing a smoke report once she’s dry and ready.
Processing
Likes
41
Share
12/01/18 Start of week 6 of flower. Buds are continuing to develop. The structures on the ladies vary widely. 1 has long sativa like colas. Another has 9 dominate colas and many many golf ball size side branches. 1 is a runt. amd the other is just ok. There are several phenos in these beans.
Likes
3
Share
@blackrain
Follow
Day 63, Coming closer to the end but with some problems that I've never had before, this is all because I ran out of CalMag and took most people's word that soil would be fine without it, not with biobizz all mix, which I will carry on using still but, it's quite rubbish soil to be honest.
Likes
24
Share
6.02 Growth has picked up since raising the PH of my nutrient solution to 6.25-6.5. I also began foliar feeding at lights off with 5 ml/g of Cal-Mag Plus. I added .25 tsp/gallon of recharge when feeding today. It raised the PH of the solution to 7.0 and will monitor over the next 48 hours for results. 6.04 When I tied down the big plant I split the stems where they were topped the 2nd time. Taped them up and cinced with plant ties. 6.06 End of week 9. Installed my automatic watering manifold with hydro halos. I've been feeding 3 times/day for the past week, and I won't have time to hand water 5 or 6 times a day during flower. Will probably need 1 more full week of veg before I flip to 12-12.
Likes
8
Share
This week I'm going to talk a little bit about the 2 gal pots I leave outdoors. Since they're going to be indoors now, I've assembled a fertilizer rack and the bottom compartment is perfect for a cage with all the plants I have. With a length of 1.5m, width 65cm and height of 1m, I will use 4 led bulbs 50w and 2 full spectrum LEDs 36w long 1.2m. 272w / ~ 1m2. 2/3:Plant the plants indoors and lst them. 4 led bulb 50w 5/3:Run off all the trees, as it was soaked with rain water when left outside. is still the old nutritional dose. 6/3: Today I received the led light I ordered. I perfect my design and let the tree in the cage out and lst. 9/3:I feel everything is perfect today, I reduce their lighting time to 12/12. I will cut off all the fan leaves from the stem of the 2gal pots and prune all the small branches of the 1gal pot. in this pruning I will trim them as much as possible. It's been 37 days since the seed and I think they're ready for flowering. I need to flower them urgently because in the next 2 months the weather can be as hot as 40 degrees, and I really have no way to reduce their temperature. I would probably have them flower for 7 to 8 weeks to retain maximum resin. a few days before high, I fliming an NL plant, I experimented with this technique and I feel that they have been very successful since the fliming plants have a much larger stump than other plants. I really like this technique, as it will save me the small space I currently have without having toppings. With just a few simple steps I have got a really big stump and still keep the biggest main bud of the tree. I hope each plant can give me 20-25 grams of dried marijuana.
Likes
6
Share
She’s doing really well! We did see some damage to a few fan leaves that I thought could be caterpillars…but a thorough inspection turned up nothing. Will continue to monitor closely… but zero caterpillars so far *knock on wood* while the plant next to her has had a lot. This week we continue with build a flower, and kelp it real in her water. Doubt we’ll see much vertical growth as she’s bulking up the buds.
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
Comments
Share
@Akthree
Follow
At the end of week 5 the plant started to transition into flowering
Likes
19
Share
Likes
67
Share
Threw big supercroppers on the main stalk and they are happy with their LST. Will probably stake down the sides branches here soon. ALL HAIL MARSHYDRO the best light company!
Likes
22
Share
@Smith420
Follow
Still waiting for amber colors before I harvest watching daily. Watering with just Poland spring as needed and will will allow soil to dry up a day or two prior to harvesting. As usual I hope everyone nothing but the best and appreciate each one of you. Have a great day!!