Was bummed out plant got red mites at the end but that’s fine, it didn’t not impact the grow (or at least I didn’t notice.) Harvested at the end of the 6th week of flower. Trichomes had already started turning amber due to heat degradation (couch lock party) what trichomes that were not dust ridden or amber was milky so I’d say it’s ready. Choosing the best time to harvest is still puzzling for me due to the fact that this is my 4th time harvesting cannabis. Thanks for reading... more info to come ...TBC

CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

08/21/2018 Day 1 week 3 Starting the week with second set of leaves,1st real leaves single leaves, second set is 3. It looks like one of the seedling leave is fading?.. Watching, maybe add nutes ? this week 08/22/2018 First root touching water! Here come the roots!🙏 for good week. Not sure when I add nutes. Maybe mid week. The codytledons (seedling leaves) are still healthy suggesting to me they still have nutes for seedling growth. 08/25/2018 More leaves,more roots,still no nutes,codytledons still looking good no fade. 08/26/2018 Uploaded root shots, codytledons may be withering away look closer tomorrow mornin 08/27/2018 Got up to 90° in tent, I turned on the red spectrum last night at 25%, Blue spectrum is at 100% Also some signs that codytledons turning pale, nutes coming soon 1/2 strength 💪 of course see how she responds increase as needed.

All week I have been doing root flushing

Week 14 Day 1 in BW 9 Day 91 4l Wasser mit: 4ml Bio Grow 4ml Sugar Royal 16ml Bio Bloom 4ml Power Buds 16ml Alga Bloom 4ml Green Sensation 3 ml CalMag She looks like a WinterWonderLand. Smell is very heavy.

Day 47 lost half of yeild doing sts , Cut male branches too early

Week 21 Daylight 12h20 - 7h45/20h05 Unstable weather, alternating heavy rain and wind quasi every days and sunny afternoons. Moderate temperatures around 14°C min / 23°C max. Plants are safe in the veranda; the sun is lower on the horizon now and the angle of the light is now perfect for a good finish. I need to test the humidity level in the room but it seems reasonable. No signs of diseases or moisture. Last weeks were hard with multiple aggressions: plants are like War Veterans with some damage and scars. The flowering process look not affected by this episode and harvest is approaching. Brake Pad Breath: almost ready. Pistils are rusty colored, buds are thick and dense, firm and sticky. Subtle fruity aroma: tonic and stimulating. Most advanced plant: will be the first harvested soon. 2L watering / 2 days flowering booster finish + water flawless finish + water Flash Back #2: ending the flowering cycle and starting maturation. Last plant infested by insects, may be the plant is reacting by accelerating the flowering: buds are not so dense compare with the previous plant. Pretty spicy smell and good resin production. flowering booster finish + water flawless finish + water GMO x Zombie Kush: starting the last flowering stage. Recovering good and was less injured by caterpillar than the others. Pistils are long and the flowers will enlarge soon: need almost 3 or 4 weeks to be ready. Grower master flo + bud XL enzyme + pk 13/14 Royal Moby is tall and late flowering but seems producing lot of flower. With the stress the plant become hermaphroditic, I discovered some bag of males flowers. I hope there is no pollination between the other plants. Grower master flo + bud XL enzyme + pk 13/14

welcome to Day 22 8/1/21 as you can see she has grown a lot but still short lol no SoG yet maybe by sun. she looks happy and healthy and she looks like she has 9 lower branches out of only 3 nodes and I expect 3 more branches before flower how crazy she is growing. drop a msg I would love to hear from ya. As always happy growing and keep your stick on the ice

Tested a micro humidifier in this box too and it went horribly wrong, just flooded everywhere. Mind you, it did raise the humidity a bit :D More testing next week.

Pre flower formed, starting to smell a bit more than the last week, keeping grooowing 💚

Man rocbudinc continues to impress me more and more with every plant I grow from him. His photoperiods are always my frostiest but I grew a few of his autos and they resembled photoperiods more than any other auto breeder out there. He chooses his cuts to breed with wisely I guess and his autos also grow bigger than most. These are killin it, started flushing the mac and purple candy paint yesterday 8 days shy of day 60. Took some pics saturday, I added in my slurroc keeper cuz it's been in all the videos and it's pretty.

Run-off got pretty high on the plants in the main tent when I tested it this week (2300ppm) so I flushed the plants down to around 900 over a few water events with half-strength nutes (~450). I think this, plus (mainly) the plants being too close to the LED caused them to throw some foxtails - particularly the middle plant (although I still think that spindly shit is also partly due to the bag seed pheno). Noob mistake on my end and I didn't realize until it was too late. Now the light is turned down and the run-off is back in a good range. It got high because my auto-watering halos were mostly running off the pots and not sinking in - this is because I filled the pots to the brim with coco (another noob mistake). Looks like I'm hand watering until harvest :) Big Mumma in the blurple tent on the other hand is still killing it.. Apologies for having to upload videos of the microscope - too hard to hold it still and press the button for photos lol.

.

Everything was going well in the first week, but unfortunately, a mistake caused stress in the plant. The distance between the lamp and the plant was too short. This week, I gave the plants a small amount of root growth stimulant

great, everything is going really smoothly, @Zamnesia Runtz auto, copes perfectly with leaf spot and LST, started to bloom, so I think it will soon stop growing upwards, and I won't have to hurt it anymore :) @Plagron This is the first time I've used nutritional fertilizers, but I already understand that it definitely won't be the last :) good luck to everyone :).

Hello, thanks for the , wait for a busy week but always paying attention, I bought new batteries for the ph and ppm devices despite being simple, it was since last season with the same battery, with oscillation. But everything was calm, it was resolved We have this amnesia, taken a mini wool cube to a big grodan, with roots already formed, it is inside a 5-liter , great performance with a non-spaced watering, but without much watering, Nutrition ph ppm in the daily, air humidity at 50% 23°C, foliar application after lights close at 200ppm foliage, not much runoff to hold a safe zone.

Went back through my calendar and found that today is first day of week 11 above the soil. Plant is doing really well, som3 of the large lower leaves are getting crispy-curly. Buds are very dense, mostly orange curled up hairs. Mostly cloudy with a lot of amber trics on sugar leaves. Hardly any amber on upper buds. Started flush a week ago but just couldnt bare the thought of stsrving this poor plant so I added a little cha-ching back. Shes super stinky, the most beautiful stinky Ive ever experienced. Ive found that its almost impossible to wash the smell off of my hands! Made a little slide show this morning while drinking my tea. Hope you like it!

Hi everyone 🤗 This week it looked more and more astonishing after opening the box a wonderful sweet smell wafts through the room 👍. A few days ago the Blue Cheese Phenotype 1 was harvested and placed in the dark room :-). This week both Kosher Tangie Kush phenotypes will be harvested 👍. Next week the Blue Cheese phenotypes 1 and 2 will be harvested ;-) everyone else needs a while 😀. I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱👍