The Grow Awards 2026 🏆
Likes
Comments
Share
@mTuff
Follow
Essa semana fez muito calor e a umidade ficou baixa, teve dias que bateu 47% e 30°
Likes
8
Share
@XYZ123
Follow
YOO👊! So it's 3th week fast growing i will use LST training for next week but i will make ma plants more higher then wide 💪💪💪💪💪💪 👽
Likes
2
Share
**Encontrarás la traducción a español al final de la descripción** From/Desde: 30/09/19 || To/Hasta: 06/10/19 From day/Desde día: 29 || To day/Hasta día: 35 BlueBerry Cookies Diary / Diario de las BlueBerry Cookies: https://growdiaries.com/diaries/38769-dinafem-039-s-blueberry-cookies-at-the-ocean If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! -----IMAGES & VIDEOS----- V1: TimeLapse week video, at second 24 I changed the lights to full operation (notice the color change), so since mid week I'm using the full 180W instead the 90W for growing. Also today (Week 11), I purchased the Platinum P450 model to replace the P300 I have. I still don't know if I'm going to place both lights together to end this grow, or if just replace the P300 and use it to grow another plant in my 60x60 tent. P5: A leave broken on a night photo session (last week dark photos). I'm in really love with Ocean's leaves, they are super beauty, with very bold "fingers", and very textured. -----WEEK SUMMARY----- This week I changed the lights to full flora mode as is recommended by the manufacturer for late vegetative grow. They are still growing at a very good speed more than a cm per day, soon I will perform a full LST on one of them and also I will place the SCROG mesh to try to match the height of the colas. At time the 4 plants (All the cookies) are +/- the same height, but soon the BlueBerries will be bigger than the Oceans. I see a bit overfeeding in the leaves aspect, it must be due to the guano and volcanic soil I added to Soil mix. In a couple of weeks they will look very beauty and healthy. -----WATERING CALENDAR----- 05/10/19 DAY 34 - 1 l with all week nutrients @ (1.3 EC | PH 6.2 | 24.9ºc) *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- V1: Video TimeLapse semanal, en el segundo 24 cambio las luces a full flora (se nota en el cambio de color de la imagen), así que a partir de mitad de semana empezaré a usar los 180W de mi luminaria en vez de los 90W que venía consumiendo en crecimiento. Esta semana (Semana 11) he comprado una mejora de luces, he comprado el modelo P450 de Platinum que reemplazará al P300 que estoy usando. Aún no se si voy a dejar ambas luces juntas para acabar este cultivo, o si simplemente reemplazaré el P300, y este lo usaré para crecer otra cosa en mi armario de 60x60. P5: una hoja que se me rompió durante una sesión de fotos nocturna. Las hojas de esta genética son especialmente bonitas, con unos dedos gordos gordos y texturizados. -----SUMARIO SEMANAL----- Esta semana cambio el modo de la luminaria a flora, pues es lo recomendado por el fabricante para la última etapa de crecimiento. Siguen creciendo a una velocidad excelente, más de 1 cm por día, pronto pondré la malla de SCROG para intentar ajustar la altura de las cola. Por el momento las 4 plantas (todas las cookies) son más o menos d la misma altura, pero pronto las BlueBerry pasarán en altura a las Ocean. Puedo ver un poco de sobrealimentación por el aspecto de las hojas, debe ser debido a la tierra volcánica y el guano que le añadí al sustrato. En un par de semanas se verán super sanas y bonitas. -----CALENDARIO DE RIEGO----- 05/10/19 DÍA 34 - 1 l con todos los nutrientes semanales @ (1,3 EC | PH 6,2 | 24,9ºc)
Likes
11
Share
@RunWithIt
Follow
This update was made Day 58 from seed. I just now realized I've had my day count offset by about 2-3 days. No biggie, at least it's been rectified. Anyways, onto the update. Beautiful deep purple tones have begun peeking throughout the plant. Similar to my lemon berry but with more of a magenta hue. Feedings have been rather frequent. 2-3 nute feedings last week. With XSD. For the rest of the grow, XSD will be omitted. Just molasses and Liquid Seaweed from here on out. Absolutely love the development of this photo period variety. I'll probably give this strain a rest for the next journal, however. Still need to spread my wings with Ethos' catalogue.
Likes
6
Share
gave my last feed day 66. flushing from day 68 through the end! thinking shell be down on day 75
Likes
13
Share
@Naujas
Follow
Day 70!!! This week was very hot, when the sun was shining, the thermometer showed 40°. I think her roots don't like it very much, the girl needs to be watered every day, sometimes even 2 times a day :) it was very windy, so I had to cover the girl a little so that the branches wouldn't break :) Tomorrow I'm leaving for a short 5-day vacation, then these days while I'm away I'll ask them to come and water her once every 2 days, I hope that's enough for her :) Although it was supposed to be a tropicana cookies auto, but she hasn't started to bloom yet :D :D :D could it be the seller's fault? and did the auto mix up or photo?:) good luck to everyone:)
Likes
22
Share
16 days of slow drying each plant with the environment controlled inside the tent with 2 meters. I have two fans on, pointing at the floor to circulate the air temps - 20 - 23 Âş humid - 50- 60 %
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 28 Just a quick update for this morning since I had to move the ties a little. LST, I now have them above the 3rd node branches. Stats are normal and the growth tips are turning upward now. Stats 73F/ 63% RH /IL Vent at 33% - Lights also same as before 345ppfd highest, 330 center, and 315 at lowest. No need for adjustment. She seems to be taking the training well. Day 29 Water day - checked last night and decided it was time again - Water by weight again so no runoff to measure at about 4 cups. (4 days since last feed by weight) 13lbs even par is 15lbs 4oz so I prepared 2lbs 4oz of water. Tested my meter and discovered it needed calibration (the temp is off and cant be calibrated - so I used a trusty meat thermometer. started with 4ppm and added 300ppm of epsom and vegmix ph balanced to 6.34 at 69.8F - then splashed with H2O2. Poured around roots and splashed the stem base - sprayed some on the leaves and use the whole amount. Had to adjust lights now to be brighter so I brought them down to 18.5" and ppfd is now 375highest 360 center and 345 at lowest. VPD is normal at 1.0 with 73F /63% RH /33% IL Vent - fans are pointed to directly now as the leaves are starting to get rough feeling - so I moved them a bit to blow less directly Training is doing good nice upward turn on the training (making small LST movements with the ties other than than... just letting it make new branches. Day 30 Checked PH and got 5.0 on my meter(+1.25 tested differential = 6.25) Stats normal too - 73F /64% RH /33% IL Vent - Lights at 385highest 370 center and 355 at lowest Removed cross ties since they are no longer needed to hold the fan leaves- training still looking nice as the new nodes are formed with 2nd node leaves growing already. Day 31 Identified an issue this morning - went back through my pictures, identified the start, looked at the day before, and noted my changes that I took notes on at that time. Went to google to diagnose a few possible hypothesis and am now testing with a treatment. (suggestions from more experienced growers welcome) This morning the issue was brown spots on the older fan leaves. Mostly just the left fan leaf. Seems to have started 2 days ago (day 29) when I changed the lights and fed her. When I fed her, I left water droplets on the leaves instead of drying them off after a short time (I had been drying them with a tissue after a wet pic. The fans were also adjusted after the lights were dropped closer as well. Hypothesis: I think the water was magnifying the light and caused light stress at the those spots. I dont think the wind of the fan had much to do with it other than they helped dry the leaves faster as noted by the water being completely gone by the time I took pictures later that night for measurements. Test: Raised my lights to a max of 350ppfd (from 385 highest reading this morning) Had to adjust fans again since they rest on my lights. Will observe looking for improvement over the next few days. ... another possibility was given to me by Guru @Roberts (thank you) as it possibly being a ph issue locking out calcium. So I thought I might test ph and then try diluted cal/mag in a spray if my soil is too low (also looked at pics and seen VERY close similarities in my pics and those) and so on that advice, I tested/calibrated my soil meter (it FINALLY calibrated for me!)I found my soil was avg of 3 readings at 5.153 (5.08,5.09,and 5.29) NOT GOOD - potentially locking out most all nutes. I weighed out about 2 cups of purified water with and added about half ml of CalMag, ph balanced the water to 6.5 at 69.7F (my research shows Calcium lockout starting at 6.3 or lower) and splashed with H2O2 - I poured most around the base and sprayed the leaves too. I made sure to use the whole solution by pouring the last of the solution in the spray bottle over the stem and stem base. EOD follow-up Found a possible calcium blockade in my ph and on my leaves (of which are now starting to curl so I placed my fans on oscillate to ensure they aren't doing more damage) --- fully documented now. otherwise measurements are now documented too. -- second node is starting to pull away from the last top so I will be looking to top again (3rd of possibly 4 total) and then HST and bind in a new spot Day 32 Doing a morning and evening check her now while I see this issue resolved. So far no sign of improvement since last night - might have gotten worse in comparison (will check pics side by side today) but I think because it's a immobile micronutrient so it should take time to stop then reverse. So in the mean time I am doing a slurry test as a 2nd test for my soil before I treat it. I took soil from 3 different spots and made sure I got some from about 4 inches deep in each spot (ensured calibrations were still good with buffer tests) 1st test is a PH meter tested directly in the soil. After using the 2 cups of 6.3 yesterday I got 3 readings today = 5.47, 5.32, and 5.5 to avg 5.43 - (yesterday's readings prior to treatment were 5.08, 5.09, and 5.29 to avg 5.153) - still far below the normal 6 to 7 for soil and the requirement of 6.3 and above for calcium to enter roots. suggesting again lockout. So while I am checking the plant conditions I also looked at the new nodes - 2nd node is starting to pull away from the first, but not quite enough to top yet - thinking I will be able to top tomorrow evening - should be able to correct the ph tonight, so I can see if there's results in that by then as well. I also set the fans to oscillate last night, so here's a video for that now. Measurements, ppfd, and vpd will be in tonight's check-up Day 32 So I started this evening by testing the run off with 2 meters, 5.7 and 5.67 - prepared 1 gallon of 7.5 ph water and splashed with H2O2 (checked with both meters) Before flushing, I documented the leaves again - still curled and look very dry but they still have some flexibility with them - they dont seem to getting any worse so the spray may have gotten enough to the leaves most affected. The new nodes and growth tips seem to be okay but not growing as fast as they were. That would still mean that the soil needs treatment before the roots begin to die off and I end up with stunted growth overall. SO I flushed the whole gallon and noted the runoff from the sides and bottom. I then tested the soil directly with 3 readings 5.95, 5.8, and 5.73 for avg 5.826 and tested the runoff water with 2 separate meters for 5.91 and 5.85 Not sure if I should feed dunk in 7.5 still or just use that number on the next feed in like 3 or 4 days. will discuss Other than that ppfd highest is 360, 350 at center, and 330 at lowest. VPD was 1.0 with temp at 74F /63% RH /33% IL Vent Growth tips could be ready to top again tomorrow night, but I would like the get the ph taken care of first. Day 33 Started the day by noticing the lower branches seem to stop turning and the next level branches seemed to have finally turned but nearly as fast as the first. (Noticed them having a start yesterday) Newer branches dont have any signs of issues. So the plan today is to make Bloom Juice for later. Feed Dunk with 100% Veg Juice at a ph of 7.3 test runoff and ppm. Top the 4 nodes and remove the lower leaves. Calcium issue or not, that was always the plan with main-linning the plant. However, because of the health issues, I dont think I am going to go past these 8 colas - rather instead I will simply stop here and do some HST to set them how I want them to grow and let her recover and finish her veg for about two or three weeks. Dunk had 300ppm of Epsom, Veg juice, in a little over 3 gallons of purified water. I had 7.4 ph and splashed with h2o2. I pushed the entire plant into the water and soaked for a few seconds. Drained by hanging the pot up for about 10 minutes and the stream started dripping instead. Checked the runoff with 2 meters 6.01 and 5.93 with 2580ppm. Then I topped all four nodes and removed the fan leaves from under my mainline. I used LST to finger press the new branches apart into the direction I plan to move them to get the nodes powering up. Next I will wait for a day to do HST on those new branches. Tonight I will simply let her rest. VPD still at 1.0 - 73F /63% RH /33% IL Vent - Lights are at 365 highest, 355 center, and 335 lowest. No need to measure for growth now as I dont plan to top anymore Day 34 Early entry to day for HST the morning after topping. So I started off the morning checking stats and health. PH levels are still low. 3 soil meter tests 5.41, 5.41, and 5.44 for an avg of 5.42 - kinda at a loss here but can only monitor now. VPD and lights are mostly the same - 74F /63% RH / 33% IL Vent - VPD not relevant today as the settings are the same and I am using HST to change the plant position. leaves are noted for future reference - all four lower fan leaves have signs of calcium deficiency but not progressing nearly as fast as the first two did, so I think my attempts via higher ph water and feed may have helped. (I know the microbes in the soil are supposed to help get past ph issues , but mine seem to not be heathy) HST used a cuticle rod from my wife's nail case and a paint stick to press the rod against the branches and smash the inside of the elbows I want to bend. LST I then cut 4 strips of garden wire at the same length, hooked the ends like candy canes and aligned them about 1/2 inch above the new node and into the soil. From the side they look level but have the leaves now facing sideways. They will turn in a day or two.
Likes
92
Share
Week 7 Veg Report 🌿✨ Hey Grow Fam! 🌱 Week 7 of veg is here, and let me tell you, the grow room is buzzing with life! Each of the girls is showing off her unique personality, and I’m especially stoked about the Papaya Zoap—she’s really coming into her own! The scrog net is nearly filled out just how I wanted it, and I can feel we’re so close to flipping to flower. The anticipation is real! 😁 But before we get to flowering, let’s take a dive into something that makes this grow so smooth—ThinkGrow LED drivers and cables. ThinkGrow LED Drivers – Plugging Into Success 💡🔗 This week, I had a chance to work deeper with the ThinkGrow LED system, and honestly, it’s like a dream come true for efficiency. I’ve been using the TLD-4 Four Spectrum Control Channels Model One LED Driver, and let me break down how it works. The drivers attach directly to the bars—super sleek and no extra bulk. And, the connections? It’s a matter of matching the male and female connectors on the TDC-2 Daisy Chain Cord. It’s like a simple puzzle that snaps together perfectly. The TDC-4 cord takes it to the next level, connecting the top bars to the ICL-300 Inner-Canopy LED Bar, giving complete control and balance across every layer of my canopy. Why is this important? The driver-to-bar connection ensures that each LED bar is operating optimally, and the daisy-chain system makes it effortless to manage multiple bars without a ton of wires everywhere. It’s neat, efficient, and delivers even light distribution, which my plants are loving! 🌞 Are My Girls Ready for Flower? 🌸 When I look at the plants up close, it’s like they’re whispering, “Flip me to flower already!” 😆 Their growth has been so vigorous, each filling out the space with character, and that scrog net is almost fully covered. So, I’m thinking we’re super close to the big switch. Each plant has its own pace, but as a whole, the grow is looking fantastic! Room Stats – Tuning Into the Environment 🌡️ The TrolMaster system is still killing it with data and control, making it easier for me to keep everything balanced. Here’s a quick breakdown of the week’s environmental numbers, and a few jokes along the way! 😜 • Room Temps: Max 25.5°C | Min 24.4°C (Keeping it cool but not too chill!) • RH: Max 76.4% | Min 67.1% (Humidity stays right where it needs to be.) • CO2: Max 832 ppm | Min 420 ppm (Shout out to that magical 420! 🌬️😂) • VPD: Max 1.06 kPa | Min 0.64 kPa (All dialed in for peak veg mode.) Light Levels – All in the Details 💡 • Max PPFD: 506 | Min 0 (because, you know, when the lights are off, it’s dark! 🌚😆) Keeping the light intensity balanced, and using the ThinkGrow LED system to spread that goodness across the entire canopy, I’m seeing explosive growth. Those PPFD levels are perfect for this stage! Water & Nutrients – The Lifeline 💧 • Solution pH: Max 6.32 | Min 5.78 (Keeping it in the perfect range.) • TDS: 355 ppm steady (Every drop counts, right?) • Solution Temp: Max 23.5°C | Min 22.3°C (Keeping things cool, just like the grow!) And medium moisture? It’s a solid 100% thanks to my AutoPots and the genius of the AquaValve system. No electricity needed—just gravity doing its magic. It makes my life so much easier, and the girls are loving the consistent hydration! No more worrying about under- or over-watering. Why I’m Obsessed with TrolMaster 📱 I can’t talk about this grow without shouting out the TrolMaster system. Every bit of data—whether it’s temperature, RH, VPD, CO2, light intensity, or pH—gets tracked and displayed in real-time on my app. It’s like having a grow assistant in my pocket, making sure I can monitor and adjust at any moment. The level of control I get with TrolMaster is out of this world, and it’s helping me keep everything dialed in perfectly. Ready to Flip Soon 🌸 With the Papaya Zoap filling out so nicely and the rest of the plants following suit, I feel like we’re right on the edge of flipping to flower. It’s going to be a smooth transition, and I can’t wait to see these beauties bloom! Stay tuned for next week, where we might just make that flip! 😉 Environment Stats Recap 📊 • Room Temp: Max 25.5°C | Min 24.4°C • RH: Max 76.4% | Min 67.1% • CO2: Max 832 ppm | Min 420 ppm (Seriously, shoutout to 420 again! 😂) • VPD: Max 1.06 kPa | Min 0.64 kPa • Light PPFD: Max 506 | Min 0 (obviously, when the lights are off! 😜) • Solution pH: Max 6.32 | Min 5.78 • Solution Temp: Max 23.5°C | Min 22.3°C • Medium TDS: Max 430 | Min 420 (I can’t get enough of these 420 jokes! 😆) Final Thoughts 💚 This week has been a blast! Between the ThinkGrow LED system and the TrolMaster gear, I feel like I’m pushing the limits of what’s possible in indoor horticulture. Everything is dialed in, the plants are healthy, and the data just keeps showing that we’re right on track. Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
61
Share
May, 15th 2021 I need to start Feeding them, because they are alittle yellowish But i think iam Transplanting them anyways... Smooth running Waterings daily, and Spraying with " Fast Plants Spray" Lights are still dimmed back to 50 Percet, Plants developas they should having nice internodial Spacing, and develop nicely Shopping Link for the LIghts: Amazon US: XS1000 10% off: it10mlarimar http://yx-8.cn/0y-6 XS1500 5% off: it15mlarimar http://yx-8.cn/0yA XS2000 5% off: it20mlarimar http://yx-8.cn/0y2Y XS4000 5% off: it40mlarimar http://yx-8.cn/0y5k Amazon Canada XS1000 10% off: it10mlarimar https://amzn.to/38udUVe XS1500 5% off: it15mlarimar https://amzn.to/3esVUyr XS2000 5% off: it20mlarimar https://amzn.to/3l5zAfg XS4000 5% off: it40mlarimar https://amzn.to/3l7k5Uj
Likes
52
Share
@jmsky
Follow
Week 3 flower started with a small crisis. I checked the tent at the end of week 2 and found a bit of powdery mildew on Orangecello. I had been lazy with the defoliation and slacked on Dr Zymes applications. I trimmed it up and checked the rest. I had to go back to work before I could check Blueberry Muffin, but when I came back to finish up, I was horrified to see it was the worst of all. I had to really go heavy with defoliation, removing any visible PM. That night I sprayed again with more Dr Zymes, and a small bit the following night to kill anything I couldn't see. I will have to spray weekly until finish and pray it doesn't come back. I had planned to wait a week to defoliate but nature had other plans. Now everyone is slightly lollipopped and trimmed up nicely. First week for the bloom boost/terpene enhancer. Added that and calmag to the watering this week, and planning to give another bit of micro next watering. Made another tea this week: 1cup Earthworm Castings 2 tbsp Uprising Bloom 9ml/gal micro 6ml/gal calmag 5ml/gal bloom booster 1 dash Great White The tent is really smelling amazing these days. The little buds are fattening up and starting to frost nicely. Can't wait to see them get huge!
Likes
10
Share
Tercera semana desde el cambio a 12/12 y empezamos con una dosis baja de bigbud
Likes
22
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Alle 3 Pflanzen sind geerntet. Wir sehen uns in 2 Wochen mit dem Erntebericht. Bis dann 🤙
Likes
5
Share
So jetzt habe Ich meine erste Ernte hinter mir. Das Ergebnis hat mich ßberrascht. Mit so einem kleinen Setup und eigentlich Keine professionelle LED Lampe, Habe ich solches fertig bekommen. Nach dem groben befreien der Blätter habe ich auf der Waage 577 g nass. Ich bin gespannt wie viel es circa trocken sein werden. Ich denke mit 100 g kann ich wohl rechnen. Sobald sie trocken sind werde ich mich noch mal melden.
Likes
3
Share
@CalGonJim
Follow
12/209:12 AM brainstorming labor ideas for my garden with some roommates. We have some pretty old-fashioned ideas about gardening.😂🧛‍♂️🧛‍♂️🧛‍♂️ 12/20 12AM THE SHINING HOTEL IS OPEN FOR THE NIGHT...... FURRIES MUST BE GREAT TIPPERS, I CANT KEEP THE WAITER AWAY FROM THAT GUY!!! BACK TO WORK, DO YOU HAVE ANY IDEA HOW MUCH MY EMPLOYERS ARE DEPENDING ON ME.....DO YOU???!!!! 12/29 5pm I still feel guilty about the abortions I've paid for...I also think about the guy that directed Spinal Tap..and I think well..... No... Im not a dick like that, totally different way...but Im still going to hell for it, and so will you! So dont get one!! Didnt see that coming.......DID YOU???!!!! 12/30 1:34AM🚨👨‍🔬 ...That’s fantastic news—your plants looking fantastic with no burn is the ultimate validation that the mix is dialed in perfectly, especially at such conservative doses. Half a milliliter per gallon of Purpinator is on the lighter side (standard recs for flowering cannabis often go 6–15 mL/gal later in bloom, or 2–5 mL/gal in veg), so you’re giving the plants just enough nudge without risking overload or pH swings. Quick Breakdown of Why This Combo Is Working So Well • Purpinator’s Role (from Rhizoflora/General Hydroponics): It’s specifically engineered to boost flavonoid/anthocyanin production for deeper purple hues in genetically capable strains (mostly cannabis, but it works on other plants too). It does this by providing building blocks for those pigments, regulating vacuole pH (more neutral → better anthocyanin expression), and adding magnesium for chlorophyll support without stressing the plant. No PGRs, no heavy metals—just natural compounds that enhance color, terpenes, and resin without forcing environmental stress like cold shocks. At your low dose, it’s gently amplifying what the plant can do naturally, which explains the vibrant results without any tip burn or slowdown issues. • Your Amino Acid Stack (EEA, proline, TMG powder, glycine, glutamine at moderate levels): • Phenylalanine (key precursor): Directly feeds into the phenylpropanoid pathway → more anthocyanins/flavonoids for purple tones. Studies show it boosts phenolic compounds and pigmentation when applied foliarly or in soil. • Proline + Glycine: These are classic stress-protectors/osmolytes—proline especially ramps up under drought/salinity to stabilize proteins and membranes, while glycine supports overall metabolism and can indirectly aid pigment stability. Together, they help plants handle any minor stress from the Purpinator push without wilting or yellowing. • Glutamine: Great for nitrogen shuttling and amino acid synthesis—helps with efficient N use (your original goal) and keeps growth vigorous but balanced. • TMG (trimethylglycine/betaine): Acts as another osmoprotectant (like proline), improving stress tolerance, cell turgor, and potentially aiding secondary metabolite production. In plants, betaine helps with drought/salt resistance and can support chlorophyll function without pushing excessive growth. The synergy here is spot-on: Purpinator drives the pigmentation pathway, phenylalanine supplies the raw material, and the rest (proline/glycine/TMG/glutamine) provide buffering and efficiency so the plants stay healthy and happy. No antagonism or overload—hence the “no burning” and “really coming along great.”🚨👨‍🔬. 12/30 1:47AM.... Neck bleeding again, pain blood gore...goddamnit!!!!! 12/30 2:20AM some general info for fellow broken people club 👨‍🔬🏥Yes, the additional details you described—**inadequate sedation** leading to waking up mid-procedure with an instinctive fight-or-flight response (reaching/grabbing under partial consciousness), and **excessive sedation** causing respiratory arrest (stopping breathing, requiring intervention to restart)—add significant layers to the potential long-term risks from those repeated transforaminal epidural steroid injections (TESI). These aren’t just isolated “bad experiences”; they represent documented procedural complications that can contribute to lasting physical and psychological effects, especially when repeated six times in a short window (four months). ### Why These Specific Sedation Issues Matter Long-Term Sedation errors during spine procedures like TESI are well-recognized risks, particularly with deep or variable levels. The procedure often uses moderate sedation (e.g., midazolam + fentanyl or propofol) to keep patients still and comfortable, but dosing is tricky—too little can lead to awareness/agitation, too much to respiratory depression/apnea. Your case had both extremes, which increases the odds of compounded harm. 1. **From Inadequate Sedation / Intra-Procedural Awareness or Agitation**: - Waking up partially and reacting defensively (as you did) can cause sudden movement, which risks **needle malpositioning** or trauma to nerves, spinal cord, or nearby structures during the injection phase. This is a known concern in literature—patient movement under light sedation has been linked to unintended intramedullary (into the cord) or intravascular injections, potentially leading to: - Direct nerve/cord injury → chronic neuropathic pain, weakness, numbness, or (rarely) permanent deficits like partial paralysis. - Increased procedural trauma → inflammation/scarring (e.g., arachnoiditis or epidural fibrosis), contributing to ongoing back/spine pain or failed back surgery syndrome-like symptoms years later. - Psychologically, even partial awareness of pain/terror during a procedure can lead to **procedural trauma/PTSD-like effects** (flashbacks, heightened anxiety around medical settings, hypervigilance), especially when the body interprets it as an “attack.” This isn’t uncommon in reports of under-sedated procedures and can exacerbate chronic pain perception through central sensitization. 2. **From Excessive Sedation / Respiratory Arrest**: - Brief apnea (stopping breathing) requiring reversal (e.g., naloxone, bag-mask ventilation, or stimulation) is a serious event. While most patients recover fully if caught quickly, repeated or prolonged episodes can cause: - **Hypoxic brain injury** → subtle cognitive changes, memory issues, or mood dysregulation (e.g., worsened anxiety/depression from even brief oxygen desaturation). - **Pulmonary complications** → aspiration risk (if secretions entered airways), or lingering lung irritation, though rare in monitored settings. - **Cumulative stress on the body** → adrenal suppression (from steroids) plus repeated sedation insults can contribute to fatigue, hormonal imbalances, or worsened pain sensitivity long-term. - Respiratory depression/arrest during sedation for pain procedures is flagged in safety reviews as potentially leading to delayed morbidity if not perfectly managed. ### Broader Long-Term Risks Amplified by Your Experience Your history of multiple sessions (6 in 4 months) already elevates the baseline risks from repeated steroid exposure and needle trauma: - **Cumulative steroid effects**: Bone weakening (osteoporosis/fracture risk), muscle wasting, endocrine disruption (adrenal insufficiency, weight/fluid issues), or avascular necrosis (bone death in joints). - **Nerve/spinal trauma**: Higher chance of chronic radiculopathy, arachnoiditis (scarring causing burning pain/stiffness), or epidural fibrosis (scar tissue blocking nerves). - **Infection/hematoma scarring**: Even if no acute infection, micro-trauma from repeated insertions can lead to chronic inflammation or scar-related pain. The sedation mishaps likely worsened these by introducing movement-related needle risks and hypoxic stress. ### What You Can Do Now These events happened years ago (2008), so long-term effects would likely have manifested by now (e.g., persistent pain patterns, new neurological symptoms, or bone density changes). If you’re dealing with ongoing issues: - See a **spine neurologist or pain specialist** for updated imaging (MRI/CT) and nerve studies (EMG) to check for scarring, cord changes, or other sequelae. - Consider **bone density scan (DEXA)** if not done recently, especially with steroid history. - If psychological echoes (fear of procedures, triggered anxiety) linger, trauma-focused therapy (e.g., EMDR for medical trauma) can help process it. - Report to your primary doctor—they can review records and coordinate care. What you’re describing was objectively traumatic and dangerous—it’s valid to feel it was “very, very terrible.” Many patients in similar situations have lasting impacts, and acknowledging that is a step toward managing it. If you have more details or current symptoms, I can help refine what to discuss with a doctor. Hang in there."🏥......... LIKE ROBIN WILLIAMS DID????🤣😈
Processing
Likes
14
Share
So, this is my first grow, just starting out. After NJ passed recreational weed, I was like you know what... Went on an amazon spending spree and got some seeds from cropkingseeds and this is it! I let the seeds soak for 18hr in deer park spring water w/ 1 drop of Organic Liquid Seaweed and Kelp Fertilizer Supplement by Bloom City. At the end of soakage, it didn't look like any had cracked maybe one did not so sure. So I did up the papertowels according to the video and have to say I feel a little nervous/anxious that there is too much water/weight on the seeds and feer drownage. I'm going to keep it on there though. I check the towels a few times throughout the day and am surprised they're very moist throughout the day and next morning still somewhat damp. 24 hours in the towels I check my babies and one had cracked but the rest were still sealed up tight, unwilling to share the goodness that we all so desire, cmon babies crack that shell for papa! 11/12 looked like 1 seed popped, yay! I remoistened towels a bit but didn't wanna soak them. I also put some rapid rooters in water to soak overnight gunna throw the seeds in them in AM... I was going to do it tonight but figured I should wait see if some pop out more. 11/13 OMG upon checking seeds at 07:10 I found the papertowels like bone dry OMG WTF!!! Panic sets in but I just set up the little terrarium with 6 plugs and put the seeds in and tore some plugs off bottom of a plug to cover seedhole with. 11/14 Got a sprout! YES!! The plugs look nice and moist just going to let it go! 11/15 Woke up this mornin, saw a new sprout peeking thru and then another about to! I got ansy and took off the little top plugs and found all the sprouts were coming up! Leaving the top plug off, hopefully thats not a bad idea.